dmesg 输出信息，请求高手指导！

Stephen__Han

Mar 18 10:48
...

Timeout called with negative time.
function == 0xE000000000482420, arg == 0xE00000011E0A9800, ticks == 0x8000007E,  flags == 0x0
Timeout called with negative time.

没看明白是哪儿的问题，请高手指导指导，先谢了！

struggle

请把出现问题的场景描述一下，你直接贴这样的内容出来，无法做出判断

Stephen__Han

您好struggle
现在应用都正常，只是看 event.log 报错，dmesg 报上面这个。
hp rx2620，hp-ux 11.23
event.log 我截取一部分放下面：
>------------ Event Monitoring Service Event Notification ------------<

Notification Time: Wed Sep  9 22:40:05 2009

APSV_XZ sent Event Monitor notification information:

/adapters/events/TL_adapter/0_4_1_0 is >= 1.
Its current value is INFORMATION(1).



Event data from monitor:

Event Time..........: Wed Sep  9 22:40:05 2009
Severity............: INFORMATION
Monitor.............: dm_TL_adapter
Event #.............: 24                  
System..............: APSV_XZ

Summary:
     Adapter at hardware path 0/4/1/0 : Received a FCP Assists Frozen
     completion message  


Description of Error:


lbolt value: 828789090

   The Fibre Channel Driver received a FCP assists frozen completion
   message


Probable Cause / Recommended Action:

The Tachyon TL adapter generated an interrupt indicating that
  the FCP Assists have been frozen. This is caused by the driver
  requesting the Tachyon TL chip to freeze the FCP Assists.
  No action required. Informative message. The driver will recover
  from this condition

Additional Event Data:
     System IP Address...: 135.1.1.211
     System IP Address...: 10.0.0.222
     Event Id............: 0x4aa7be4500000002
     Monitor Version.....: B.01.01
     Event Class.........: I/O
     Client Configuration File...........:
     /var/stm/config/tools/monitor/default_dm_TL_adapter.clcfg
     Client Configuration File Version...: A.01.01
          Qualification criteria met.
               Number of events..: 1
     Associated OS error log entry id(s):
          0x4aa7be4500000001
     Additional System Data:
          System Model Number.............: ia64 hp server rx2620
          OS Version......................: B.11.23
          EMS Version.....................: A.04.11
          STM Version.....................: C.48.00
     Latest information on this event:
          docs.hp.com/hpux/content/hardware/ems/dm_TL_adapter.htm#24

v-v-v-v-v-v-v-v-v-v-v-v-v    D  E  T  A  I  L  S    v-v-v-v-v-v-v-v-v-v-v-v-v



Component Data:
    Physical Device Path....: 0/4/1/0
    Vendor Id...............: 0x0000103C
    Serial Number(WWN)......: 50060B000030CB14

I/O Log Event Data:

     Driver Status Code..................: 0x00000018
     Length of Logged Hardware Status....: 0 bytes.
     Offset to Logged Manager Information: 0 bytes.
     Length of Logged Manager Information: 61 bytes.

Manager-Specific Information:

Raw data from FCMS Adapter driver:  
00000006 31665162 00000000 00000001 2F75782F 636F7265 2F697375 2F544C2F
6B65726E 2F737263 2F636F6D 6D6F6E2F 7773696F 2F74645F 6973722E 63





>---------- End Event Monitoring Service Event Notification ----------<

南非蚂蚁

给出hp-unix的具体版本号
机器启动多长时间， 感觉是MPT driver报出来的信息，尝试升级 MPT driver



刚才查看了资料，官方说正常运行时间超过400天将导致此问题。

南非蚂蚁

更多的资料我看不到，因为没有官方的资料授权

Stephen__Han

谢谢蚂蚁兄！
应该就是MPT的问题。重启可以临时解决，如果想彻底解决，则需要升一下firmware

lgatuk

Stephen__Han 发表于 2010-03-18 10:37
Mar 18 10:48
...

你好 我刚入门hpux
请问 你凭什么看到这个信息就判定有错误呢

还有，这个给你带来的最直观的影响是什么呢 谢谢