免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
› 论坛 › 备份版区 › HP-UX › rp2405的重启出差
最近访问板块 发新帖
查看: 5329 | 回复: 7
打印 上一主题 下一主题

rp2405的重启出差 [复制链接]

yuio654

论坛徽章:
0
跳转到指定楼层
1楼 [收藏(0)] [报告]
发表于 2009-11-30 14:21 |只看该作者 |倒序浏览
机器掉电，恢复供电以后重启出错，一大堆错误提示 /rc/rc3.d/***** \'(\' 之类的错误，前面板Attn黄灯闪烁，ctrl+b提示用户名，密码

麻烦问下这个东东咋解决啊？

[ 本帖最后由 yuio654 于 2009-11-30 14:58 编辑 ]
yuio654

论坛徽章:
0
2楼 [报告]
发表于 2009-11-30 15:18 |只看该作者
启动过程中crtl+c可以进入系统，这时候网络这类的服务都没有启动，甚至ip都是空的，

/sbin/init.d/net start启动报同样的错误 syntax error at line *** : \'(\'is not expected


通过ifconfig 和route可以填上ip

看这样子有点类似先启动服务，后挂载的文件系统。但是没有动过啊。郁闷
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
ziggler

论坛徽章:
0
3楼 [报告]
发表于 2009-11-30 16:14 |只看该作者

回复 #6 yuio654 的帖子

应急计划做的不好啊。
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
yuio654

论坛徽章:
0
4楼 [报告]
发表于 2009-11-30 16:15 |只看该作者
/etc/rc.log

Configure system crash dumps
Output from \"/sbin/rc1.d/S080crashconf start\":
----------------------------
EXIT CODE: 0

Removing old vxvm files
Output from \"/sbin/rc1.d/S090sw_clean_vxvm start\":
----------------------------

VxVM VxVM device node check
Output from \"/sbin/rc1.d/S091vxvm-nodes-check start\":
----------------------------
/sbin/rc1.d/S091vxvm-nodes-check[4]: /usr/sbin/lsdev: not found


VxVM VxVM general startup
Output from \"/sbin/rc1.d/S092vxvm-startup start\":
----------------------------


Output from \"/sbin/rc1.d/S093vxvm-reconfig start\":
----------------------------
/sbin/rc1.d/S093vxvm-reconfig[45]: /etc/vx/lib/vxcommon: not found
\"/sbin/rc1.d/S093vxvm-reconfig start\" FAILED

Mount file systems
Output from \"/sbin/rc1.d/S100localmount start\":
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
swallowcn

论坛徽章:
0
5楼 [报告]
发表于 2009-11-30 16:53 |只看该作者

!

机器上边有重要数据?

如果没有重要数据,就无所谓嘛,大不了XX一下!呵呵
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
swallowcn

论坛徽章:
0
6楼 [报告]
发表于 2009-11-30 17:11 |只看该作者

!

修吧,修不好就找我,我们可以帮你修复,呵呵!
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
yuio654

论坛徽章:
0
7楼 [报告]
发表于 2009-11-30 18:10 |只看该作者


  1. Cleaning /etc/ptmp...
  2. (c)Copyright 1983-2000 Hewlett-Packard Co.,  All Rights Reserved.
  3. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
  4. (c)Copyright 1980, 1984, 1986 Novell, Inc.
  5. (c)Copyright 1986-1992 Sun Microsystems, Inc.
  6. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
  7. (c)Copyright 1989-1993  The Open Software Foundation, Inc.
  8. (c)Copyright 1986 Digital Equipment Corp.
  9. (c)Copyright 1990 Motorola, Inc.
  10. (c)Copyright 1990, 1991, 1992 Cornell University
  11. (c)Copyright 1989-1991 The University of Maryland
  12. (c)Copyright 1988 Carnegie Mellon University
  13. (c)Copyright 1991-2000 Mentat Inc.
  14. (c)Copyright 1996 Morning Star Technologies, Inc.
  15. (c)Copyright 1996 Progressive Systems, Inc.
  16. (c)Copyright 1991-2000 Isogon Corporation, All Rights Reserved.


  19.                            RESTRICTED RIGHTS LEGEND
  20. Use, duplication, or disclosure by the U.S. Government is subject to
  21. restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
  22. Technical Data and Computer Software clause in DFARS 252.227-7013.

  24.                            Hewlett-Packard Company
  25.                            3000 Hanover Street
  26.                            Palo Alto, CA 94304 U.S.A.

  28. Rights for non-DOD U.S. Government Departments and Agencies are as set
  29. forth in FAR 52.227-19(c)(1,2).
  30. /sbin/rc[67]: syntax error at line 2 : `(\' unexpected
  31. /sbin/rc1.d/S080crashconf[18]: /usr/bin/echo:  not found
  32. /sbin/rc1.d/S080crashconf[19]: /usr/sbin/mount:  not found
  33. /sbin/rc1.d/S080crashconf[19]: /usr/bin/echo:  not found
  34. /sbin/rc1.d/S093vxvm-reconfig[47]: /etc/vx/lib/vxcommon:  not found
  35. /sbin/rc2.d/S590Rpcd[30]: syntax error at line 2 : `(\' unexpected
  36. /sbin/rc2.d/S600iforls[34]: syntax error at line 2 : `(\' unexpected
  37. /sbin/rc2.d/S605Dmisp[30]: syntax error at line 2 : `(\' unexpected
  38. /sbin/rc2.d/S620xfs[10]: env:  not found
  39. /sbin/rc2.d/S620xfs[10]: grep:  not found
  40. /sbin/rc2.d/S648eus[43]: syntax error at line 2 : `(\' unexpected
  41. /sbin/rc2.d/S700acct[39]: syntax error at line 2 : `(\' unexpected
  42. interpreter \"/bin/sh\" not found
  43. file link resolves to \"/usr/bin/sh\"
  44. /sbin/rc[14]: /sbin/rc2.d/S890ServCtlMgr:  not found
  45. interpreter \"/bin/sh\" not found
  46. file link resolves to \"/usr/bin/sh\"
  47. /sbin/rc[14]: /sbin/rc2.d/S996vradmind:  not found
  48. interpreter \"/bin/sh\" not found
  49. file link resolves to \"/usr/bin/sh\"
  50. /sbin/rc[14]: /sbin/rc2.d/S996vxrsyncd:  not found
  51. /sbin/rc3.d/S200tps.rc[15]: /usr/bin/hostname:  not found
  52. /sbin/rc3.d/S823hpws_apache[45]: syntax error at line 2 : `(\' unexpected
  53. /sbin/rc3.d/S823hpws_tomcat[46]: syntax error at line 2 : `(\' unexpected
  54. /sbin/rc3.d/S823hpws_webmin[45]: syntax error at line 2 : `(\' unexpected
  55. /sbin/rc3.d/S823hpws_xmltools[42]: syntax error at line 2 : `(\' unexpected
  56. interpreter \"/bin/sh\" not found
  57. file link resolves to \"/usr/bin/sh\"
  58. /sbin/rc[14]: /sbin/rc3.d/S960init.cssd:  not found

  60.      HP-UX Start-up in progress
  61.      __________________________

  63.      Configure system crash dumps ........................................ OK
  64.      Mount file systems .................................................. OK
  65.      VxVM device node check .............................................. OK
  66.      VxVM general startup ................................................ OK
  67.       .................................................................... OK
  68.      Mount file systems .................................................. OK
  69.      Update kernel and loadable modules .................................. N/A
  70.      Initialize loadable modules ......................................... N/A
  71.      Setting hostname .................................................... OK
  72.      Start Kernel Logging facility ....................................... N/A
  73.      Set privilege group ................................................. N/A
  74.      Display date ........................................................ N/A
  75.      Copy processor logs to /var/tombstones .............................. OK
  76.      Save system crash dump if needed .................................... N/A
  77.      Start evp ........................................................... OK
  78.      Enable auxiliary swap space ......................................... OK
  79.      Start syncer daemon ................................................. OK
  80.      Configure Loopback interfaces (lo0) ................................. OK
  81.      VxVM volume recovery start .......................................... OK
  82.      Configuring all unconfigured software filesets ...................... OK
  83.      Recover editor crash files .......................................... OK
  84.      Clean UUCP .......................................................... OK
  85.      List and/or clear temporary files ................................... OK
  86.      Clean up old log files .............................................. OK
  87.      Start system message logging daemon ................................. OK
  88.      Start pty allocator daemon .......................................... OK
  89.      Configuring OLA/R interface ......................................... N/A
  90.      Start network tracing and logging daemon ............................ OK
  91.      Configure HP igelan Gigabit Ethernet interfaces ..................... OK
  92.      Configure HP iether 100BT/Gigabit Ethernet interfaces ............... OK
  93.      Configure HP Gigabit Ethernet interfaces ............................ OK
  94.      Configure HP Ethernet interfaces .................................... OK
  95.      Configure HP HP-PB 100BT interfaces ................................. OK
  96.      Create PCI FDDI device files. ....................................... OK
  97.      Configure HP 100BASE-T interfaces ................................... OK
  98.      Configure VLAN interfaces ........................................... OK
  99.      Configure LAN interfaces ............................................ OK
  100.      Start name server daemon ............................................ OK
  101.      Starting Netscape Directory Server .................................. OK
  102.      Starting Netscape Administration Server ............................. OK
  103.      Start NFS core subsystem ............................................ OK
  104.      Start NIS+ server subsystem ......................................... OK
  105.      Start NIS+ client subsystem ......................................... OK
  106.      Start NIS server subsystem .......................................... OK
  107.      Start NIS client subsystem .......................................... OK
  108.      Start NFS client subsystem ..........................................




  113. GenericSysName [HP Release B.11.11] (see /etc/issue)
  114. Console Login:
  115. INIT: Command is respawning too rapidly.
  116. Will try again in 5 minutes.
  117. Check for possible errors.
  118. id:  h1 \"/sbin/init.d/init.cssd run >/dev/null 2>&1 </dev/null\"

  120. INIT: Command is respawning too rapidly.
  121. Will try again in 5 minutes.
  122. Check for possible errors.
  123. id:samd \"/usr/sam/lbin/samd  # system mgmt daemon\"


  126. GenericSysName [HP Release B.11.11] (see /etc/issue)
  127. Console Login: root
  128. Password:
  129. Please wait...checking for disk quotas
  130. (c)Copyright 1983-2000 Hewlett-Packard Co.,  All Rights Reserved.
  131. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
  132. (c)Copyright 1980, 1984, 1986 Novell, Inc.
  133. (c)Copyright 1986-1992 Sun Microsystems, Inc.
  134. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
  135. (c)Copyright 1989-1993  The Open Software Foundation, Inc.
  136. (c)Copyright 1986 Digital Equipment Corp.
  137. (c)Copyright 1990 Motorola, Inc.
  138. (c)Copyright 1990, 1991, 1992 Cornell University
  139. (c)Copyright 1989-1991 The University of Maryland
  140. (c)Copyright 1988 Carnegie Mellon University
  141. (c)Copyright 1991-2000 Mentat Inc.
  142. (c)Copyright 1996 Morning Star Technologies, Inc.
  143. (c)Copyright 1996 Progressive Systems, Inc.
  144. (c)Copyright 1991-2000 Isogon Corporation, All Rights Reserved.


  147.                            RESTRICTED RIGHTS LEGEND
  148. Use, duplication, or disclosure by the U.S. Government is subject to
  149. restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
  150. Technical Data and Computer Software clause in DFARS 252.227-7013.

  152.                            Hewlett-Packard Company
  153.                            3000 Hanover Street
  154.                            Palo Alto, CA 94304 U.S.A.

  156. Rights for non-DOD U.S. Government Departments and Agencies are as set
  157. forth in FAR 52.227-19(c)(1,2).
  158. You have mail.
  159.                                                                         
  160. Value of TERM has been set to \"vt100\".
  161. WARNING:  YOU ARE SUPERUSER !!

  163. # bash
  164. bash-2.04# who -r
  165.    .       run-level 3  Nov 30 17:33    3    0    S
  166. bash-2.04# pwd
  167. /
  168. bash-2.04# ifconfig lan0
  169. ifconfig: no such interface
  170. bash-2.04# nets
  171. netscape  netstat   
  172. bash-2.04# netstat -rn
  173. Routing tables
  174. Destination           Gateway            Flags   Refs Interface  Pmtu
  175. 127.0.0.1             127.0.0.1          UH        0  lo0        4136
  176. 127.0.0.0             127.0.0.1          U         0  lo0           0
  177. bash-2.04# pwdd
  178. bash: pwdd: command not found
  179. bash-2.04# pwd
  180. /
  181. bash-2.04# cd /etc/
  182. bash-2.04# more rc.log
  183. Old /etc/rc.log moved to /etc/rc.log.old

  185. **************************************************
  186. HP-UX Start-up in progress
  187. Mon Nov 30 04:34:01 EST 2009
  188. **************************************************

  190. Configure system crash dumps
  191. Output from \"/sbin/rc1.d/S080crashconf start\":
  192. ----------------------------
  193. /sbin/rc1.d/S080crashconf[18]: /usr/bin/echo:  not found
  194. /sbin/rc1.d/S080crashconf[19]: /usr/sbin/mount:  not found
  195. /sbin/rc1.d/S080crashconf[19]: /usr/bin/echo:  not found
  196. EXIT CODE: 0

  198. Mount file systems
  199. Output from \"/sbin/rc1.d/S081localmount start\":
  200. ----------------------------
  201. checking quotas

  203. VxVM device node check
  204. Output from \"/sbin/rc1.d/S091vxvm-nodes-check start\":
  205. ----------------------------

  207. VxVM general startup
  208. Output from \"/sbin/rc1.d/S092vxvm-startup start\":
  209. ----------------------------


  212. Output from \"/sbin/rc1.d/S093vxvm-reconfig start\":
  213. ----------------------------

  215. Mount file systems
  216. Output from \"/sbin/rc1.d/S100localmount start\":
  217. ----------------------------
  218. checking quotas

  220. Update kernel and loadable modules
  221. Output from \"/sbin/rc1.d/S110kmbuild start\":
  222. ----------------------------
  223. \"/sbin/rc1.d/S110kmbuild start\" SKIPPED

  225. Initialize loadable modules
  226. Output from \"/sbin/rc1.d/S112kminit start\":
  227. ----------------------------
  228. /sbin/rc1.d/S112kminit[206]: Syntax error at line 2 : `(\' is not expected.
  229. \"/sbin/rc1.d/S112kminit start\" SKIPPED

  231. Setting hostname
  232. Output from \"/sbin/rc1.d/S320hostname start\":
  233. ----------------------------
  234. /sbin/rc1.d/S320hostname[36]: Syntax error at line 2 : `(\' is not expected.

  236. Start Kernel Logging facility
  237. Output from \"/sbin/rc1.d/S350kl start\":
  238. ----------------------------
  239. \"/sbin/rc1.d/S350kl start\" SKIPPED

  241. Set privilege group
  242. Output from \"/sbin/rc1.d/S400set_prvgrp start\":
  243. ----------------------------
  244. \"/sbin/rc1.d/S400set_prvgrp start\" SKIPPED

  246. Display date
  247. Output from \"/sbin/rc1.d/S420set_date start\":
  248. ----------------------------
  249. \"/sbin/rc1.d/S420set_date start\" SKIPPED

  251. Copy processor logs to /var/tombstones
  252. Output from \"/sbin/rc1.d/S430pdcinfo start\":
  253. ----------------------------


  256. Save system crash dump if needed
  257. Output from \"/sbin/rc1.d/S440savecrash start\":
  258. ----------------------------
  259. savecrash directory not set;  defaulting to: /var/adm/crash
  260. EXIT CODE: 2 -  savecrash found no core dump to save
  261. \"/sbin/rc1.d/S440savecrash start\" SKIPPED

  263. Start evp
  264. Output from \"/sbin/rc1.d/S450evp.init start\":
  265. ----------------------------

  267. Enable auxiliary swap space
  268. Output from \"/sbin/rc1.d/S500swap_start start\":
  269. ----------------------------
  270. Enabling device paging on /dev/vg00/lvol10.
  271. swap device(s) active

  273. Start syncer daemon
  274. Output from \"/sbin/rc1.d/S520syncer start\":
  275. ----------------------------
  276. syncer started

  278. Configure Loopback interfaces (lo0)
  279. Output from \"/sbin/rc2.d/S008net.init start\":
  280. ----------------------------

  282. VxVM volume recovery start
  283. Output from \"/sbin/rc2.d/S096vxvm-recover start\":
  284. ----------------------------

  286. Configuring all unconfigured software filesets
  287. Output from \"/sbin/rc2.d/S120swconfig start\":
  288. ----------------------------
  289.        * Turning off all network based resolving services in
  290.          \'/etc/nsswitch.conf\'
  291.        * Setting up temporary hostname in \'/etc/hosts\'
  292.        * Restoring \'/etc/hosts\' to its original contents.
  293.        * Restoring \'/etc/nsswitch.conf\' to its original contents

  295. Recover editor crash files
  296. Output from \"/sbin/rc2.d/S200clean_ex start\":
复制代码
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
yuio654

论坛徽章:
0
8楼 [报告]
发表于 2009-12-01 10:22 |只看该作者
已解决，问题还是出在了/etc/rc.config.d/netconf上，看上次修改时间是在五月份（还没接手），中间有一段乱码。
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号：11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们：huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP