- 论坛徽章:
- 0
|
这是日志报错!报错在下面!
======= 05/16/11 15:58:55 EAT Started make_tape_recovery. (Mon May 16
15:58:55 EAT 2011)
@(#) Ignite-UX Revision C.6.0.115
@(#) net_recovery (opt) $Revision: 10.655 $
* Testing pax for needed patch
* Passed pax tests.
* Recovery Archive Description = Recovery Archive
* Recovery Archive Location = /dev/rmt/0mn
* Number of Archives to Save = 2
* Pax type = tar
In? dsk/vg name minor# Associated disks/mountpo
ints
2 v /dev/vg00 0x00 /dev/dsk/c0t0d0s2 /dev/d
sk/c2t8d0s2
/dev/vg00/lvol1 /stand 2
/dev/vg00/lvol2
/dev/vg00/lvol3 / 2
/dev/vg00/lvol4 /opt 2
/dev/vg00/lvol5 /tmp 2
/dev/vg00/lvol6 /usr 2
/dev/vg00/lvol7 /var 2
/dev/vg00/lvol8 /home 2
/dev/vg00/lv_arch /arch2
2
0 v /dev/vg_lock 0x01 /dev/dsk/c32t0d0
** 0 - The Volume Group or Filesystem is Not included in the
System Recovery Archive
** 1 - The Volume Group or Filesystem is Partially included in the
System Recovery Archive
** 2 - The Volume Group or Filesystem is Fully included in the
System Recovery Archive
* Checking Versions of Ignite-UX filesets
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2011-05-16,15:58/system_cfg vg00
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.con
f
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -p -m /etc/lvmconf/vg00.mapfile /dev/vg00
vgexport: Volume group \"/dev/vg00\" is still active.
* Backing Up Volume Group /dev/vg_lock
* /usr/sbin/vgcfgbackup /dev/vg_lock
vgcfgbackup: Warning: couldn\'t query physical volume \"/dev/dsk/c32t0d0\":
The specified path does not correspond to physical volume attached to
this volume group
vgcfgbackup: Warning: couldn\'t query all of the physical volumes.
vgcfgbackup: Volume group not activated.
* Creating Map Files for Volume Group /dev/vg_lock
* /usr/sbin/vgexport -p -m /etc/lvmconf/vg_lock.mapfile /dev/vg_lock
* Creating Control Configuration.
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group \"/dev/vg_lock\".
* Creating Archive File List
* Creating Archive Configuration
* /opt/ignite/bin/make_arch_config -c
/var/opt/ignite/recovery/2011-05-16,15:58/archive_cfg -g
/var/opt/ignite/recovery/2011-05-16,15:58/flist -n 2011-05-16,15:58 -r
64 -d Recovery\\ Archive -t -i 1 -m t
* Saving the information about archive to
/var/opt/ignite/recovery/previews
* Creating The Tape Archive
* Checking configuration file for Syntax
Adding /opt/ignite/Version file to LIF.
* Writing boot LIF to tape
1+0 records in
0+1 records out
I/O error
ERROR: /usr/bin/dd if=/var/tmp/uxinstlf.recovery of=/dev/rmt/0mn bs=2k failed
to write LIF onto tape.
ERROR: Failed to generate LIF on tape .
======= 05/16/11 15:59:50 EAT make_tape_recovery completed unsuccessfully |
|