- 论坛徽章:
- 0
|
If you can find /dev/fbs/m640, your are using PGX. If you
> find out /dev/fbs/gfxp0, you are using PGX32. The following is the
> descrition to configure it:
> To use the PGX in 24 bit mode, use the m64config command to
> change to a resolution that supports the desired colordepth, then
> either use the m64config command with the -depth option or modify
> Xservers appropriately. Note that if there is a setting in
> Xservers, it will override the m64config setting.
>
> Example: Setting a PGX to use 24 bit at 1152x900 using m64config:
>
> # m64config -res 1152x900x76 now
> # m64config -depth 24
> # m64config -prconf
>
> PGX 32 Notes: Changing the PGX32 Resolution
>
> Resolutions up to 1280 x 1024 default to 8/24-bit mode.
> Resolutions over 1280 x 1024 default to 8-bit mode.
> By default, the bit depth is set to 8/24 for resolutions of
> 1280x1024 and less or 8 only for higher resolutions. |
|