- 论坛徽章:
- 0
|
solaris8安装问题
Oops! My mistake.
The probe-scsi-all command does not function identically on all platforms and does not in all cases probe for Fibre Channel devices . In such instance, You could use show-devs or you could use probe-fcal & proble-fcal-all to find Fibre Chanle devices.
Note:
1. Try to use nvalias instead of devalias. If you use devalias, you will lose the setting after power recycle.
2. Both internal Disks for E3500 and Disks inside A5x00 Disk Array are using FC-AL interface not SCSI interface.
3. Usually people use external Multipack for OS and external Disk Arrays for application data. You could install the OS on the external A5x00 disk array but not recommended. |
|