关于JumpStart的问题

lizhixian_2000

各位兄弟，有熟悉JumpStart的吗？今天装了一下午Solaris 10用jumpstart也没装上。下面是报错信息，帮忙看看是哪配置有问题：
# reboot \"net - install h=bjrndmain6 ip=135.252.232.215 n=255.255.255.0 r=135.252.232.1 t=PRC j=135.252.232.32\"
Oct 15 19:26:35 bjrndmain6 reboot: rebooted by root
syncing file systems... done
rebooting...
SC Alert: Host System has Reset
NOTICE: CPU1 Bank 2 DIMMs are from different vendors
Sun Fire V250, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.11.4, 8192 MB memory installed, Serial #55620925.
Ethernet address 0:3:ba:50:b5:3d, Host ID: 8350b53d.

Rebooting with command: boot net - install h=bjrndmain6 ip=135.252.232.215 n=255.255.255.0 r=135.252.232.1 t=PRC j=135.252.232.32
Boot device: [url=]/pci@1c,600000/pci@2/SUNW,qfe@0,1[/url]  File and args: - install h=bjrndmain6 ip=135.252.232.215 n=255.255.255.0 r=135.252.232.1 t=PRC j=135.252.232.32
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
whoami: no domain name
Hardware watchdog enabled
Oct 15 04:29:10 svc.startd[7]: Could not set reconfiguration property: No such file or directory
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
#
说明下做JumpStart服务端的是135.252.232.32，ISO文件也在该服务器上。想给135.252.232.215这台机器装系统。关于域名方面我将32这台机器的hosts加入了域名，安装还是报whoami。:qie: :qie: :qie:

lizhixian_2000

查看了论坛关于jumpstart的帖子，说的都比较简单。我的操作也只是安装时顺便定义了安装机器的一些参数而已。没有什么大的区别啊。今天又试了下已经不报startd无法更改配置文件的错误了。但还是报consol service cannot run。

happylyc83

我也遇到这样的事了 奇怪。

lvan6750

我也遇到过，老大帮我解决了，由于我是新手，还是没完全搞懂

lizhixian_2000

没搞懂的哥们，你们老大是咋个解决的呢。给个解决方案撒。。。:pao: :pao: :pao: :pao:

alexwwf

jumpstart配起来还是挺麻烦的，我都是用其他的网络方式安装的，jumpstart配起来好费时啊

emontreal

其实boot命令不需要那么复杂，看看下面的步骤可行否。

1. Install Jumpstart Server
To Create a SPARC Install Server With SPARC or x86 DVD Media
# mkdir -p install_dir_path
# cd /cdrom/cdrom0/s0/Solarisxxx/Tools
./setup_install_server install_dir_path

install the second cd alaso

2. Configure Client
The following example illustrates how to add an install client that is on the same subnet as the install server. The install client is named basil, which is an Ultra 5 system. The file system /export/home/dvdsparc/ contains the add_install_client command.
install_server# cd /<jumpstart directory>/Solaris_xx/Tools
install_server# ./add_install_client -i <IP> -e <ETHERNET ADDRESS> basil sun4u

3. Jumpstart the WS:
ok boot net - install [disk=/:cXtYd0s0:free,swap:cXtYd0s1:4096]
主机名和IP等信息可以在交互方式中输入