救命！Solaris 9 boot 不起来！

kmfdm

Netra 1400, Solaris 9，\r\n早上发现ping的通，但是不能telnet。\r\n通过post server登陆，没有反应，send break然后boot, \r\n\r\n{2} ok boot\r\nResetting ...\r\n\r\nscreen not found.\r\nCan\'t open input device.\r\nKeyboard not present.  Using ttya for input and output.\r\n\r\nNetra t 1400/1405 (4 X UltraSPARC-II 440MHz), No Keyboard\r\nOpenBoot 3.23, 4096 MB memory installed, Serial #15256699.\r\nEthernet address 8:0:20:e8:cc:7b, Host ID: 80e8cc7b.\r\n\r\n\r\n\r\nRebooting with command: boot\r\nBoot device: /pci@1f,4000/scsi@3/disk@0,0  File and args: -s\r\nSunOS Release 5.9 Version Generic_112233-04 64-bit\r\nCopyright 1983-2002 Sun Microsystems, Inc.  All rights reserved.\r\nUse is subject to license terms.\r\nWARNING: forceload of misc/md_raid failed\r\nWARNING: forceload of misc/md_hotspares failed\r\n\r\nAHE Boot Disk Version 7.0 (SunOS 5.9)\r\n\r\nconfiguring IPv4 interfaces: qfe0.\r\nconfiguring IPv6 interfaces: qfe0.\r\nHostname: hlr_cf10\r\nSUNW,qfe0: 100 Mbps half duplex link up - internal  transceiver\r\n\r\n\r\n到这一步就停了，用boot -s也是一样。请高人指点！

race

configuring IPv6 interfaces: qfe0？启用IPV6了？

kmfdm

跟IPV6有关系？可是我们这儿所有的Netra 1400都是这么配的呀！

metor78

probe-scsi-all的结果和printenv的结果

kmfdm

楼上能解释一下么，兄弟实在是菜。

race

从别的机器能登录进去吗？看看messages

youzhipiao

ok sync\r\nok setenv diag-level=max\r\nok setenv auto-boot?true\r\nok setenv diag-switch?true\r\n\r\n看看结果