Solaris8启动报错：couldn\'t set locale correctly

心耘

screen not found.\r\nkeyboard not found.\r\nKeyboard not present.  Using ttya for input and output.\r\n\r\n\r\nSun Fire 280R (2 X UltraSPARC-III+) , No Keyboard\r\nCopyright 1998-2002 Sun Microsystems, Inc.  All rights reserved.\r\nOpenBoot 4.5, 2048 MB memory installed, Serial #53448422.\r\nEthernet address 0:3:ba:2f:8e:e6, Host ID: 832f8ee6.\r\n\r\n\r\n\r\nInitializing Memory -\r\nRebooting with command: boot -r\r\nBoot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e010b8f601,0:a  File and args: -r\r\nSunOS Release 5.8 Version Generic_117350-12 64-bit\r\nCopyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.\r\nconfiguring IPv4 interfaces: eri0.\r\nHostname: s1\r\nmetainit: s1: there are no existing databases\r\n\r\nConfiguring /dev and /devices\r\n/kernel/drv/sparcv9/fcsm: undefined symbol \'fc_ulp_get_port_login_params\'\r\nWARNING: mod_load: cannot load module \'fcsm\'\r\ncouldn\'t set locale correctly\r\nConfiguring the /dev directory (compatibility devices)\r\nThe system is coming up.  Please wait.\r\nchecking ufs filesystems\r\n/dev/rdsk/c1t0d0s6: is clean.\r\n/dev/rdsk/c1t0d0s7: is clean.\r\nstarting rpc services: rpcbind\r\ncouldn\'t set locale correctly\r\n done.\r\nSetting netmask of eri0 to 255.255.255.224\r\nSetting default IPv4 interface for multicast: add net 224.0/4: gateway s1\r\nsyslog service starting.\r\ncouldn\'t set locale correctly\r\ncouldn\'t set locale correctly\r\ncouldn\'t set locale correctly\r\nPrint services started.\r\nOct 26 20:27:29 s1 sendmail[248]: My unqualified host name (s1) unknown; sleeping for \r\n\r\nretryvolume management starting.\r\ncouldn\'t set locale correctly\r\nThe system is ready.\r\ns1 console login: Oct 26 20:28:29 s1 sendmail[248]: unable to qualify my own domain name \r\n\r\n登陆系统之后增加用户也有这样的错误：\r\nroot@s1 # useradd -m -d /usr/zhou -s /bin/csh -g staff zhou\r\ncouldn\'t set locale correctly\r\ncouldn\'t set locale correctly\r\n64 blocks\r\ncouldn\'t set locale correctly\r\ncouldn\'t set locale correctly\r\n兄弟我菜鸟一个，请各位帮忙了！

hjp1973

1\\couldn\'t set locale correctly \r\n备份/etc目录然后运行sys-unconfig命令重新设定即可!\r\n\r\n2\\s1 console login: Oct 26 20:28:29 s1 sendmail[248]: unable to qualify my own domain name \r\n编辑/etc/hosts文件,在以本主机名开始的那行的第二字段后加s1.net(前后用TAB隔开)\r\n比如将\r\n192.168.0.1   s1         loghost\r\n改为\r\n192.168.0.1   s1         s1.net     loghost

jiangping

原帖由 hjp1973 于 2005-10-27 11:11 发表\r\n1couldn\'t set locale correctly \r\n备份/etc目录然后运行sys-unconfig命令重新设定即可!\r\n\r\n2s1 console login: Oct 26 20:28:29 s1 sendmail[248]: unable to qualify my own domain name \r\n编辑/etc/hosts文件 ...

\r\n\r\n\r\n是不是安装系统时启用了DNS就会有这样的错误呢?\r\n\r\n另:\r\n运行sys-unconfig这个命令不是很危险吗,后果...会怎么样啊???\r\n\r\n请明示!!!

Xstar

好像是所有配置重新配吧，就跟你重装OS似的，但应用这些文件不会丢失。

ubuntu590

linux上也有这个命令，我试过一次，也就是重新配置一下系统，没什么的。