安装BMR 4.7 For AIX5.2-005故障排除！

in_my_position

安装BMR 4.7 For AIX5.2-005故障排除！\r\n\r\n前几天配BMR4.7 for AIX5.2-005碰上了点麻烦，费了半天劲才搞定。\r\n1. 安装BMR4.7的时候报错,错误信息如下。\r\nwbportal:/usr/lpp/BareMetal./bmrsetupclient\r\n\r\nBare Metal Restore Client Configuration\r\n\r\nVerifying environment...\r\nVerification successful.\r\n\r\nEnter BMR main server\'s IP hostname that resolves to an IP address\r\nusable for routine BMR communications []: bakupsvr\r\nEnter the BMR main server port number [8362]: \r\nEnter this NetBackup client name [wbportal_bkup]: \r\nRunning bmrsavecfg for the first time (this may take a few minutes).\r\n/dev/ipldevice not found\r\n\r\n0301-150 bosboot: Invalid or no boot device specified!\r\nusage:  bosboot {-a | -v} [-d device] [-p proto] [-k kernel] [-l lvdev]\r\n                  [-b file] [-M serv|norm|both] [-D|-I] [-LTq]\r\n       Where:\r\n       -a              Create boot image and write to device or file.\r\n       -v              Verify, but do not build boot image.\r\n       -d device       Device for which to create the boot image.\r\n       -p proto        Use given proto file for RAM disk file system.\r\n       -k kernel       Use given kernel file for boot image.\r\n       -l lvdev        Target boot logical volume for boot image.\r\n       -b file         Use given file name for boot image name.\r\n       -D              Load kernel debugger.\r\n       -I              Load and Invoke kernel debugger.\r\n       -M norm|serv|both       Boot mode - normal or service.\r\n       -T platform     Specifies the hardware platform type.\r\n       -q              Query disk space required to create boot image.\r\n       -L              Enable MP locks instrumentation.\r\nexpr: syntax error\r\n/usr/bin/mkvgdata[406]: test: argument expected\r\nsyntax error The source line is 1.\r\nThe error context is\r\n               {print $4 + >;>;>;  } <<< \r\nawk: The statement cannot be correctly parsed.\r\nThe source line is 1.\r\nexpr: syntax error\r\nexpr: syntax error\r\n/usr/bin/mkvgdata[739]: test: argument expected\r\nexpr: syntax error\r\nexpr: syntax error\r\nbmrsavecfg completed without errors.\r\n\r\nThe BMR command \'bmrsavecfg\' must be run before each backup of this system.\r\nNetBackup calls the bpstart_notify script (found in /usr/openv/netbackup/bin)\r\neach time the client starts a backup operation. Hence, running \'bmrsavecfg\'\r\nfrom the bpstart_notify script will ensure that \'bmrsavecfg\' runs before\r\neach backup of this system.\r\n\r\n\r\nConfiguration of client wbportal_bkup,bakupsvr completed successfully.\r\nBefore a system restore can take place, at least one complete\r\nsystem backup must be taken from the backup server.\r\nwbportal:/usr/lpp/BareMetal\r\n\r\n2. 解决方法：\r\n错误提示中又\"/dev/ipldevice not found\"，一查再这台机器上还真没有，到别的机器上一看都有。看来是这的问题了。听V的人说bmrsavecfg会调用mkszfile，单独运行这个命令报同样的错。\r\nwbportal:/mkszfile\r\n/dev/ipldevice not found\r\n\r\n0301-150 bosboot: Invalid or no boot device specified!\r\nusage:  bosboot {-a | -v} [-d device] [-p proto] [-k kernel] [-l lvdev]\r\n                  [-b file] [-M serv|norm|both] [-D|-I] [-LTq]\r\n       Where:\r\n       -a              Create boot image and write to device or file.\r\n       -v              Verify, but do not build boot image.\r\n       -d device       Device for which to create the boot image.\r\n       -p proto        Use given proto file for RAM disk file system.\r\n       -k kernel       Use given kernel file for boot image.\r\n       -l lvdev        Target boot logical volume for boot image.\r\n       -b file         Use given file name for boot image name.\r\n       -D              Load kernel debugger.\r\n       -I              Load and Invoke kernel debugger.\r\n       -M norm|serv|both       Boot mode - normal or service.\r\n       -T platform     Specifies the hardware platform type.\r\n       -q              Query disk space required to create boot image.\r\n       -L              Enable MP locks instrumentation.\r\n\r\nwbportal:/wbportal:/\r\n\r\n看来问题不是出在BMR上，是AIX的问题。\r\n查了查IBM的手册/dev/ipldevice，应该再安装完OS的时候就自动创建了。\r\n\r\n用下面的方法可以重新创建/dev/ipldevice。\r\n1. make sure which is boot device\r\nlslv -m hd5\r\n\r\nthis command will returned following. So hdisk0 is boot device in this sample.\r\n# lslv -m hd5\r\nhd5:N/A\r\nLP    PP1  PV1               PP2  PV2               PP3  PV3\r\n01 0001 hdisk0   \r\n\r\n2. Re-link boot device to /dev/ipldevice\r\nln rhdisk0 /dev/ipldevice\r\n# ls -l ipldevice rhdisk0\r\ncrw-------   2 root     system       14,  2 Sep 20 2004  ipldevice\r\ncrw-------   2 root     system       14,  2 Sep 20 2004  rhdisk0\r\n\r\n创建完 /dev/ipldevice，bmr终于安装成功。\r\n\r\n如果说的不对的地方，请提示！我对AIX不太懂。

haohan111

好呀！怎么没人顶呀！我顶！

mysoldier

谢谢提供这么详细的资料！