adic1000带库不退带

kuan520

ADIC1000带库,带库自检正常,主机识别带库正常,备份软件为legato,配置带库正常,清点磁带的时候非常慢.\r\n磁带进入带机之后经常读不出来,报read open error,或者是CDI之类的错误.\r\n如:\r\n/dev/rmt2.1 reading: read open error, Device not ready\r\n/dev/rmt6.1 reading: read open error: drive status is Drive reports no error - but state is unknown\r\nThe CDI attribute for \"/dev/rmt6.1\" accessed via a CDI unsupported driver has been changed to \"Not used\" \r\n\r\n带机长时间折磨磁带之后弹出来了,但是机械手并不去抓磁带,然后备份软件报:\r\nfailed unloading drive `/dev/rmt4.1\' to slot \'301\', error \'25\'\r\nnsrjb: Jukebox error:  Sun 21:08:25 Illegal Request, Unload Tape Failure\r\n\r\n几乎所有带机都有此故障,更换带机之后依然如此,请问各位有什么建议么?\r\n谢谢.

yddll

把CDI禁掉\r\n配置的时候一定要注意带库里带机的顺序，带机在操作系统里的顺序，要对应好

david5337

就是，估计带机的对应顺序有问题的哈！