cx300 更换故障SPA后,LUN无法迁移过去

漫天飞虹

问题如下,CX300盘柜，控制器SPA故障，带电更换SPA后，硬件正常，目前所有的LUN还在SPB上，原属于SPA的LUN无法切换到SPA上，手工执行后，大概一分钟，还会从SPA切换到SPB上，极度郁闷中，是否需要重启盘柜及两台数据库呢？

漫天飞虹

大牛们，怎么提醒下呀。数据快备份完了。准备重启。这是戴尔给的步骤。\r\n\r\n请测试:\r\n\r\nFrom Navisphere Manager:\r\n  \r\nEnter engineering mode on the CLARiiON array. (From Navisphere, press ctrl-shift-F12 and enter messner as the password.) \r\nRight-click the Storage Group the host is in. \r\nSelect Properties. \r\nGo to the hosts tab. \r\nClick the Advanced button. \r\nCheck all boxes. \r\nClick Apply.\r\n  \r\nOn the host:\r\n  \r\nRescan the disks in the operating system. \r\nIssue the powermt config command. (This command is not needed for PowerPath 4.x for Windows.) \r\n \r\n\r\n同时使用powermt display,看看有没有四个路径

supersuper

学习了，我也碰到这个问题了