OSPF Point-to-Multipoint, Nonbroadcast

我爱臭豆腐

     \nThe following example illustrates a point-to-multipoint network with nonbroadcast. \n\ninterface Serial0\nip address 10.0.1.1 255.255.255.0\nip ospf network point-to-multipoint non-broadcast\nencapsulation frame-relay\nno keepalive\nframe-relay local-dlci 200\nframe-relay map ip 10.0.1.3 202\nframe-relay map ip 10.0.1.4 203\nframe-relay map ip 10.0.1.5 204\nno shut\n!\nrouter ospf 1\nnetwork 10.0.1.0 0.0.0.255 area 0\nneighbor 10.0.1.3 cost 5\nneighbor 10.0.1.4 cost 10\nneighbor 10.0.1.5 cost 15\n \n\nThe following is the configuration for the router on the other side: \n\ninterface Serial9/2\n ip address 10.0.1.3 255.255.255.0\n encapsulation frame-relay\n ip ospf network point-to-multipoint non-broadcast\n no ip mroute-cache\n no keepalive\n no fair-queue\n frame-relay local-dlci 301\n frame-relay map ip 10.0.1.1 300\n no shut\n !\n router ospf 1\n network 10.0.1.0 0.0.0.255 area 0\n \n\nThe output shown for neighbors in the first configuration above looks like this:\n\nRouter# show ip ospf neighbor\nNeighbor ID     Pri   State           Dead Time   Address         Interface\n4.1.1.1           1   FULL/  -        00:01:52    10.0.1.5        Serial0\n3.1.1.1           1   FULL/  -        00:01:52    10.0.1.4        Serial0\n2.1.1.1           1   FULL/  -        00:01:52    10.0.1.3        Serial0\n \n\n\n\n