CISCO2651做NAT,请到这里来共同讨论

mejv

我在路由器上能ping通电新DNS,能PING通我的DNS服务器，在客户端能PING通路有器的内、外网口，但无法PING通ADSL,所以无法上网，请高手执教，我的配置如下：hostname jlt2651\r\n!\r\nenable password zhangcy\r\n!\r\nip subnet-zero\r\n!\r\n!\r\nip name-server 192.168.0.2\r\n!\r\nip address-pool local\r\n!\r\n!\r\n!\r\ninterface FastEthernet0/0\r\n ip address 192.168.0.233 255.255.255.0\r\n no ip redirects\r\n no ip unreachables\r\n ip nat inside\r\n duplex auto\r\n speed auto\r\n!\r\ninterface Serial0/0\r\n no ip address\r\n shutdown\r\n!\r\ninterface FastEthernet0/1\r\n ip address 192.168.10.2 255.255.255.0\r\n ip access-group 1 in\r\n ip access-group 1 out\r\n ip nat outside\r\n duplex auto\r\n speed auto\r\n!\r\ninterface Serial0/1\r\n no ip address\r\n shutdown\r\n!\r\ninterface Group-Async1\r\n ip unnumbered FastEthernet0/0\r\n encapsulation ppp\r\n async dynamic address\r\n async mode dedicated\r\n peer default ip address pool add_pool\r\n ppp authentication chap pap callin\r\n group-range 33 40\r\n!\r\nip local pool add_pool 192.168.0.241 192.168.0.248\r\nip classless\r\nip route 0.0.0.0 0.0.0.0 192.168.10.1\r\nip http server\r\nip pim bidir-enable\r\n!\r\n!\r\naccess-list 1 permit 192.168.10.1\r\n!\r\nline con 0\r\nline 33 40\r\n modem InOut\r\n modem autoconfigure discovery\r\n transport input all\r\n flowcontrol hardware\r\nline aux 0\r\nline vty 0 4\r\n password zhaomj\r\n login\r\n!\r\n!\r\nend

nocomment

你的现象是否是内网无法ping 192.168.10.1？\r\n不太明白你加哪条ACL的作用是什么？\r\n先去掉ACL试试吧

arnoud

ip nat inside source list 1 pool add_pool overload