EIGRP Metric值计算中对于loopback DLY怎么计算呢

lock0n

rt\r\n\r\n比如说一端是串口，采取默认的计算就是DLY(sum)=256*[(20000+?)/10]  ?是多少，有什么取值规范没？

lock0n

看到了\r\n

R1#sh int lo1\r\nLoopback1 is up, line protocol is up \r\n  Hardware is Loopback\r\n  Internet address is 192.168.16.1/24\r\n  MTU 1514 bytes, BW 8000000 Kbit, DLY 5000 usec, \r\n     reliability 255/255, txload 1/255, rxload 1/255\r\n  Encapsulation LOOPBACK, loopback not set\r\n  Last input 00:00:04, output never, output hang never\r\n  Last clearing of \"show interface\" counters never\r\n  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0\r\n  Queueing strategy: fifo\r\n  Output queue: 0/0 (size/max)\r\n  5 minute input rate 0 bits/sec, 0 packets/sec\r\n  5 minute output rate 0 bits/sec, 0 packets/sec\r\n     0 packets input, 0 bytes, 0 no buffer\r\n     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles\r\n     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort\r\n     299 packets output, 17940 bytes, 0 underruns\r\n     0 output errors, 0 collisions, 0 interface resets\r\n     0 output buffer failures, 0 output buffers swapped out

\r\n标记一下，以后用的着