aix ML 问题

chuny

我在AIX4.3.3 中安装了升级包 instfix -i |grep ML 显示正确。后来安装了一些可选的包后 又做了一次UPDATE，结果：\r\n# instfix -i |grep ML\r\n    All filesets for 4.3.1.0_AIX_ML were found.\r\n    All filesets for 4.3.2.0_AIX_ML were found.\r\n    All filesets for AIX43ML were found.\r\n    All filesets for 4.3.1.0_AIX_ML were found.\r\n    All filesets for 4.3.2.0_AIX_ML were found.\r\n    All filesets for 4.3.3.0_AIX_ML were found.\r\n    Not all filesets for 4330-02_AIX_ML were found.\r\n    Not all filesets for 4320-02_AIX_ML were found.\r\n    Not all filesets for 4330-03_AIX_ML were found.\r\n    Not all filesets for 4330-04_AIX_ML were found.\r\n    Not all filesets for 4330-05_AIX_ML were found.\r\n    Not all filesets for 4330-01_AIX_ML were found.\r\n    Not all filesets for 4330-06_AIX_ML were found.\r\n    Not all filesets for 4330-07_AIX_ML were found.\r\n    Not all filesets for 4330-08_AIX_ML were found.\r\n    Not all filesets for 4330-09_AIX_ML were found.\r\n    Not all filesets for 4330-10_AIX_ML were found.\r\n    Not all filesets for 4330-11_AIX_ML were found.\r\n\r\n再UPDATE ALL 提示如下：\r\n#---------------------------------------------------------------------\r\n# No filesets on the media could be used to update the currently\r\n# installed software.\r\n#\r\n# Either the software is already at the same level as on the media, or\r\n# the media contains only filesets which are not currently installed.\r\n#---------------------------------------------------------------------\r\n\r\n求高手帮助解决，谢谢

chuny

怎么 没人回啊 顶一次

havent_bao

请把你的具体操作做一个描述好么？因为在做UPDATE时有很多种方法的。看提示，你应该确实没有把升级包都做完的。你把oslevel -r结果贴出来看看，另外，你知道你打的是哪个级的补丁么？确保在UPDATE时没有任何错么？

chuny

回楼上的 oslevel -r 输出的为空， 我用smit update_all 做的升级第一遍的时候一切正常，后来又做了一次好象是半途失败了， 再装也就不能装了，显示上面的信息了。 打补丁用的是随机的3张补丁盘 ，最终应该是到10的 11是后来在网上DOWN的 。

havent_bao

oslevel -r不出结果是很不正常的.应该可以看到你补丁的版本号的。\r\n第二次用update_all失败是必然的。你用smitty update_all后，不要直接往下做。先将光标移到[_update_all]参数这里按F4，看里面的列表，肯定有的前面是“+”有的是“@”前者表示你还没有装的组件，后者表示你已经安装好的组件。失败的原因是因为你在升级时并没有把补丁所需要的组件装全，所以在失败后，不要退，看在一开始时它实际就告诉你Failue的原因是缺什么组件了，记下后，用安装盘安装这些组件后，再回来安装就好了。另外，失败的另一个原因是，你不该把已经安装的组件再选一次。

平原鸿

楼上的兄弟说的很对啊，灌水了，呵呵