论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2009-10-03 11:24 |只看该作者 |倒序浏览

P550 通过正常关的机，然后在通过HMC开机就停在“B114FB53”处不动了，不通过HMC，单独开也一样。面板显示B114FB53,\r\n在线等待。。。\r\n\r\n另外关机后，面板上的V=F变成了字母S了。不知跟这是否有关。\r\n\r\n希望各位高手帮我看一下是不是硬件问题？谢谢了！

allanwang77

小富即安

论坛徽章:: 0

2楼 [报告]

发表于 2009-10-03 11:42 |只看该作者

B114FB53-》Wiretest has detected an EST error-》from HMC-》\r\nSearch for the SRC in the Service Focal Point on the HMC. See Using Service Focal Point for the HMC for help in using the Service Focal Point.\r\n\r\n * If you find the SRC in the Service Focal Point, it requires a service action. Refer to Repairing serviceable events for more information on using the Service Focal Point.\r\n * If you do not find the SRC in the Service Focal Point, it is for tracking purposes only and does not require service.\r\n\r\n先按照上面检查一下，然后看问题是什么。