论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2004-09-09 13:31 |只看该作者 |倒序浏览

CPYSPLF FILE(POM500P) TOFILE(MM4N4LIB/AUTOFAX2) JOB(235403/NORA/PO_RELEASE) SPLNBR(1) MBROPT(*REPLACE)

其中POM500P是PRTF类型，AUTOFAX2为NODDS的PF
报错显示为POM500P的属性不对，但我修改所有可能出错的属性，但都无济于事

请各位高手帮忙看一下，不胜感激！

                        Display Program Messages

Job 235364/NORA/SHA028 started on 04/09/09 at 12:52:50 in subsystem QINTER i
Attributes of file POM500P not supported by CPYSPLF (G C).





Type reply, press Enter.
Reply . . .


F3=Exit F12=Cancel

提示信息用F1查看，如下：
                     Additional Message Information

Message ID . . . . . . : CPA3312    Severity . . . . . . . : 99
Message type . . . . . : Inquiry
Date sent  . . . . . . : 04/09/09    Time sent  . . . . . . : 13:15:40

Message . . . . : Attributes of file POM500P not supported by CPYSPLF (G C).
Cause . . . . . : The Copy Spooled File (CPYSPLF) command found special
device requirements of file POM500P number 1 job 235403/NORA/PO_RELEASE.
Attributes that are not copied by the CPYSPLF command are defined
characters, transparency, variable characters per inch (CPI), variable lines
per inch (LPI), variable font, variable character identifier (CHRID),
subscript and superscript, graphics functions, variable page rotation,
enhanced 3812 fonts, bar codes, intelligent printer data stream (IPDS)
transparent data, some final form text functions, rotated double-byte
characters, double-wide characters, some IGC characters per inch (IGCCPI)
values, and IGC shift-out and shift-in spacing specified as IGCSOSI(*NO),
and IGC shift-out and shift-in characters specified as IGCSOSI(*RIGHT).
Attributes that are simulated are:  highlight, and some final form text
functions.
Recovery  . . . : Type G to continue or C to cancel the copy function. If G
is entered, the results may not be what is acceptable because:
   -- Defined characters below X'40' will be changed to X'40'.
   -- Variable lines per inch or double-byte characters may cause extra pages
to be printed.
   -- The device attributes which control variable CPI, variable font,
variable CHRID, subscript and superscript, graphics functions, variable page
rotation, enhanced 3812 fonts, bar codes, IPDS transparent data, some final
form text functions, rotated double-byte characters, double-wide characters,
some IGCCPI values, IGCSOSI(*NO), and IGCSOSI(*RIGHT) will not be copied.
   -- The device attributes which control highlight and some final form text  functions will not be simulated if the control character is specified as  *NONE.
Possible choices for replying to message . . . . . . . . . . . . . . . :
G -- Process file.
C -- Cancel CPYSPLF.








                                                                     Bottom
Press Enter to continue.

F3=Exit F6=Print F9=Display message details
F10=Display messages in job log F12=Cancel F21=Select assistance level