- 论坛徽章:
- 0
|
用console连不上控制台， 用telnet可以， 那位帮我看看吧！谢谢了！
Message ID . . . . . . : CPI9380
Date sent . . . . . . : 09/11/04 Time sent . . . . . . : 10:33:00
Message . . . . : Error on line *N.
Cause . . . . . : The following may have caused the problem:
-- An error occurred on a communications line.
Recovery . . . : Press F14 to run problem analysis and report the problem.
Technical description . . . . . . . . : This message may be reported for
many different errors with different causes. The resource name for the
communications processor card is CMB02. The resource name for the
communications adapter card is LIN02. The communication port name is CMN03.
Message ID . . . . . . : CPF2677
Date sent . . . . . . : 09/11/04 Time sent . . . . . . : 10:32:01
Message . . . . : Device DSP01 no longer communicating.
Cause . . . . . : The system was not able to communicate with the device.
Possible causes are: the power to the device was turned off, connection to
the device was broken, or the address switches on the device were altered.
Recovery . . . : If you can not determine the cause, then run problem
analysis (ANZPRB command).
Message . . . . : Interactive activity approaching capacity of installed
feature.
Cause . . . . . : The interactive feature installed on this system is
capable of using .4 percent of the total system processing power for
interactive work (applications that use a 5250-like datastream to
communicate with the workstation). Interactive activity on this system has
exceeded the threshold value of .1 percent of the total system processing
power. If the interactive workload is allowed to increase, interactive
response times may become erratic and total system throughput may be
diminished due to the overhead incurred when the interactive threshold is
exceeded.
This message will be repeated every 60 minutes until the amount of
interactive activity on the system is reduced below the threshold value.
Recovery . . . : Examine the interactive work on the system and determine
if it can be reduced. If not, an upgrade of the interactive feature may be required to achieve optimal throughput as the interactive workload grows.
Additional interactive analysis can be achieved using the Performance
Monitor capabilities of Management Central in the iSeries Navigator product. |
|
免费注册
发表于 2004-09-11 11:31
发表于 2004-09-14 09:12
