N1290,solaris10,如何删除与添加一块板子?

coologin

管理员指南是通过DR操作规程,使用cfgadm
是否这是样,但指南上没有给出具体操作实例。那位兄弟能否补充一下删除与添加一块板子的操作流程。



另,如果二块板子的FW固件不致,是否影响在SOLARIS下加载失败

东方蜘蛛

要在SC下对板子的FW做同步～

coologin

谢谢东方兄弟提醒，刚才查了一下手册，可以使用

此步骤会将 CPU/内存板、IB6 和系统控制器升级到相同的固件级别

flashupdate [-y|-n] -c source-board destination-board
-c 将某块板指定为闪存映像的源。使用此选项可更新供替换的 CPU/内存板
-y 不提示进行确认。
-n 在要求确认时不执行此命令。

在执行 flashupdate 之前，请使用 showboards -p version 命令检查所有
板的固件版本。

在更新 CPU/内存板或 I/O 部件之前，请确保使用 poweron all 命令打开所有要
更新的板的电源。


[PDF]
Netra 1290 服务器系统管理指南 - Oracle Documentation
http://docs.oracle.com/cd/E19102 ... .../819-6909-10.pdf



回复 2# 东方蜘蛛


   

coologin

lom>showb -pv

Component   Compatible Version               
---------   ---------- -------               
SSC1        Reference  5.20.17 Build_01      
/N0/IB6     Yes        5.20.17 Build_01      
/N0/SB0     Yes        5.20.17 Build_01      
/N0/SB2     Yes        5.20.16 Build_01      

lom>flashupdate -c SB0 SB2
Waiting for critical processes to finish.  This may take a while.
Critical processes have finished.
Updating the flash image of PROM /N0/SB2/FP0 with PROM /N0/SB0/FP0
Erasing     .................. Done
Programming .................. Done
Verifying   .................. Done
Updating the flash image of PROM /N0/SB2/FP1 with PROM /N0/SB0/FP0
Erasing     .................. Done
Programming .................. Done
Verifying   .................. Done
lom>showb -pv

Component   Compatible Version               
---------   ---------- -------               
SSC1        Reference  5.20.17 Build_01      
/N0/IB6     Yes        5.20.17 Build_01      
/N0/SB0     Yes        5.20.17 Build_01      
/N0/SB2     Yes        5.20.17 Build_01      


断电，再开机。

发现在OS下看不到sb2,后来换sb2到sb4，在OS下也没发现。


难道是底板有问题？？

coologin

报错如下：
lom>showlogs

Tue Feb 05 20:29:16 hlrdbsrv1 lom: [ID 143789 local0.notice] Boot: ScApp 5.20.17, RTOS 49
Tue Feb 05 20:29:18 hlrdbsrv1 lom: [ID 499787 local0.notice] SBBC Reset Reason(s): Power On Reset
Tue Feb 05 20:29:18 hlrdbsrv1 lom: [ID 192252 local0.notice] Initializing the SC SRAM
Tue Feb 05 20:29:24 hlrdbsrv1 lom: [ID 390645 local0.notice] Caching ID information
Tue Feb 05 20:29:26 hlrdbsrv1 lom: [ID 532339 local0.notice] Clock Source: 75MHz
Tue Feb 05 20:29:30 hlrdbsrv1 lom: [ID 641509 local0.notice] /N0/PS0: Status is OK
Tue Feb 05 20:29:30 hlrdbsrv1 lom: [ID 251798 local0.notice] /N0/PS1: Status is OK
Tue Feb 05 20:29:31 hlrdbsrv1 lom: [ID 762068 local0.notice] /N0/PS2: Status is OK
Tue Feb 05 20:29:32 hlrdbsrv1 lom: [ID 372357 local0.notice] /N0/PS3: Status is OK
Tue Feb 05 20:29:32 hlrdbsrv1 lom: [ID 515227 local0.notice] Chassis is in single partition mode.
Tue Feb 05 20:29:35 hlrdbsrv1 lom: [ID 881026 local0.warning] NOTICE: /N0/FT0 is powered off
Tue Feb 05 20:29:36 hlrdbsrv1 lom: [ID 596054 local0.notice] Cold boot detected: recovering active domains
Tue Feb 05 20:29:37 hlrdbsrv1 lom: [ID 596773 local0.notice] Starting telnet server ...
Tue Feb 05 20:30:02 hlrdbsrv1 lom: [ID 271982 local0.notice] SysEvent 5 /N0/PS0, power state, On (5,1)
Tue Feb 05 20:30:02 hlrdbsrv1 lom: [ID 101369 local0.notice] /N0/SB0, hotplug status, SB0, module inserted (9,17)
Tue Feb 05 20:30:02 hlrdbsrv1 lom: [ID 101882 local0.notice] /N0/SB2, hotplug status, SB2, module inserted (9,17)
Tue Feb 05 20:30:04 hlrdbsrv1 lom: [ID 859911 local0.notice] /N0/IB6, hotplug status, IB6, module inserted (9,17)
Tue Feb 05 20:30:04 hlrdbsrv1 lom: [ID 583713 local0.notice] /N0/RP0, hotplug status, RP0, module inserted (9,17)
Tue Feb 05 20:30:04 hlrdbsrv1 lom: [ID 584226 local0.notice] /N0/RP2, hotplug status, RP2, module inserted (9,17)
Tue Feb 05 20:30:04 hlrdbsrv1 lom: [ID 280174 local0.notice] SysEvent 5 /N0/PS1, power state, On (5,1)
Tue Feb 05 20:30:05 hlrdbsrv1 lom: [ID 288366 local0.notice] SysEvent 5 /N0/PS2, power state, On (5,1)
Tue Feb 05 20:30:06 hlrdbsrv1 lom: [ID 296558 local0.notice] SysEvent 5 /N0/PS3, power state, On (5,1)
Tue Feb 05 20:30:21 hlrdbsrv1 lom: [ID 375814 local0.notice] /N0/FT0, fan speed, Low (4,1)
Tue Feb 05 20:30:31 hlrdbsrv1 lom: [ID 375814 local0.notice] /N0/FT0, fan speed, Low (4,1)
Tue Feb 05 20:32:58 hlrdbsrv1 lom: [ID 755060 local0.notice] Domain Shell - A: poweron: Initiating keyswitch: on, domain A.
Tue Feb 05 20:32:58 hlrdbsrv1 lom: [ID 755060 local0.notice] Domain Shell - A: poweron: Initiating keyswitch: on, domain A.
Tue Feb 05 20:39:10 hlrdbsrv1 lom: [ID 861498 local0.error] /N0/SB2 : Failed AR interconnect test. Status = 0e000fff
Tue Feb 05 20:39:10 hlrdbsrv1 lom: [ID 650031 local0.error] AR Interconnect test: System board SB2/ar0 address repeater connections to system board RP0/ar0 failed
Tue Feb 05 20:39:16 hlrdbsrv1 lom: [ID 866913 local0.error] SB2/ar0 Bit in error L2_CMD_VLD [0]  
Tue Feb 05 20:39:17 hlrdbsrv1 lom: [ID 865517 local0.error] SB2/ar0 Bit in error L2_BIDIPAR   
Tue Feb 05 20:39:17 hlrdbsrv1 lom: [ID 947809 local0.error] SB2/ar0 Bit in error L2_ADDR [12]  
Tue Feb 05 20:39:17 hlrdbsrv1 lom: [ID 816737 local0.error] SB2/ar0 Bit in error L2_ADDR [11]  
Tue Feb 05 20:39:17 hlrdbsrv1 lom: [ID 685665 local0.error] SB2/ar0 Bit in error L2_ADDR [10]  
Tue Feb 05 20:39:17 hlrdbsrv1 lom: [ID 834834 local0.error] SB2/ar0 Bit in error L2_ADDR [9]  
Tue Feb 05 20:39:17 hlrdbsrv1 lom: [ID 703762 local0.error] SB2/ar0 Bit in error L2_ADDR [8]  
Tue Feb 05 20:39:17 hlrdbsrv1 lom: [ID 572690 local0.error] SB2/ar0 Bit in error L2_ADDR [7]  
Tue Feb 05 20:39:17 hlrdbsrv1 lom: [ID 441618 local0.error] SB2/ar0 Bit in error L2_ADDR [6]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 310546 local0.error] SB2/ar0 Bit in error L2_ADDR [5]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 179474 local0.error] SB2/ar0 Bit in error L2_ADDR [4]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 650031 local0.error] AR Interconnect test: System board SB2/ar0 address repeater connections to system board RP0/ar0 failed
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 811445 local0.error] SB2/ar0 Bit in error L2_INCOMING [0]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 267357 local0.error] SB2/ar0 Bit in error L2_PREREQ [0]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 951905 local0.error] SB2/ar0 Bit in error L2_ADDR [22]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 820833 local0.error] SB2/ar0 Bit in error L2_ADDR [21]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 689761 local0.error] SB2/ar0 Bit in error L2_ADDR [20]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 965332 local0.error] SB2/ar0 Bit in error L2_ADDR [19]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 834260 local0.error] SB2/ar0 Bit in error L2_ADDR [18]  
Tue Feb 05 20:39:21 hlrdbsrv1 lom: [ID 703188 local0.error] SB2/ar0 Bit in error L2_ADDR [17]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 572116 local0.error] SB2/ar0 Bit in error L2_ADDR [16]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 441044 local0.error] SB2/ar0 Bit in error L2_ADDR [15]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 309972 local0.error] SB2/ar0 Bit in error L2_ADDR [14]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 178900 local0.error] SB2/ar0 Bit in error L2_ADDR [13]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 650031 local0.error] AR Interconnect test: System board SB2/ar0 address repeater connections to system board RP0/ar0 failed
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 187092 local0.error] SB2/ar0 Bit in error L2_ADDR [33]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 956001 local0.error] SB2/ar0 Bit in error L2_ADDR [32]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 824929 local0.error] SB2/ar0 Bit in error L2_ADDR [31]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 693857 local0.error] SB2/ar0 Bit in error L2_ADDR [30]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 969428 local0.error] SB2/ar0 Bit in error L2_ADDR [29]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 838356 local0.error] SB2/ar0 Bit in error L2_ADDR [28]  
Tue Feb 05 20:39:22 hlrdbsrv1 lom: [ID 707284 local0.error] SB2/ar0 Bit in error L2_ADDR [27]  
Tue Feb 05 20:39:23 hlrdbsrv1 lom: [ID 576212 local0.error] SB2/ar0 Bit in error L2_ADDR [26]  
Tue Feb 05 20:39:23 hlrdbsrv1 lom: [ID 445140 local0.error] SB2/ar0 Bit in error L2_ADDR [25]  
Tue Feb 05 20:39:23 hlrdbsrv1 lom: [ID 314068 local0.error] SB2/ar0 Bit in error L2_ADDR [24]  
Tue Feb 05 20:39:23 hlrdbsrv1 lom: [ID 182996 local0.error] SB2/ar0 Bit in error L2_ADDR [23]  
Tue Feb 05 20:39:23 hlrdbsrv1 lom: [ID 253034 local0.error] CPU Board V3 at /N0/SB2 has been removed from domain A due to a failure in interconnection test. Service action required.

lom>showcom

Component           Status   Pending  POST   Description
---------           ------   -------  ----   -----------
/N0/SB0/P0          enabled  -        pass   UltraSPARC-IV+, 1500MHz, 32M ECache
/N0/SB0/P1          enabled  -        pass   UltraSPARC-IV+, 1500MHz, 32M ECache
/N0/SB0/P2          enabled  -        pass   UltraSPARC-IV+, 1500MHz, 32M ECache
/N0/SB0/P3          enabled  -        pass   UltraSPARC-IV+, 1500MHz, 32M ECache
/N0/SB0/P0/B0/L0    enabled  -        pass   1024M DRAM
/N0/SB0/P0/B0/L2    enabled  -        pass   1024M DRAM
/N0/SB0/P0/B1/L1    enabled  -        pass   1024M DRAM
/N0/SB0/P0/B1/L3    enabled  -        pass   1024M DRAM
/N0/SB0/P1/B0/L0    enabled  -        pass   1024M DRAM
/N0/SB0/P1/B0/L2    enabled  -        pass   1024M DRAM
/N0/SB0/P1/B1/L1    enabled  -        pass   1024M DRAM
/N0/SB0/P1/B1/L3    enabled  -        pass   1024M DRAM
/N0/SB0/P2/B0/L0    enabled  -        pass   1024M DRAM
/N0/SB0/P2/B0/L2    enabled  -        pass   1024M DRAM
/N0/SB0/P2/B1/L1    enabled  -        pass   1024M DRAM
/N0/SB0/P2/B1/L3    enabled  -        pass   1024M DRAM
/N0/SB0/P3/B0/L0    enabled  -        pass   1024M DRAM
/N0/SB0/P3/B0/L2    enabled  -        pass   1024M DRAM
/N0/SB0/P3/B1/L1    enabled  -        pass   1024M DRAM
/N0/SB0/P3/B1/L3    enabled  -        pass   1024M DRAM
/N0/SB2/P0          enabled  -        pass   UltraSPARC-IV+, 1500MHz, 32M ECache
/N0/SB2/P1          enabled  -        pass   UltraSPARC-IV+, 1500MHz, 32M ECache
/N0/SB2/P2          enabled  -        pass   UltraSPARC-IV+, 1500MHz, 32M ECache
/N0/SB2/P3          enabled  -        pass   UltraSPARC-IV+, 1500MHz, 32M ECache
/N0/SB2/P0/B0/L0    enabled  -        pass   1024M DRAM
/N0/SB2/P0/B0/L2    enabled  -        pass   1024M DRAM
/N0/SB2/P0/B1/L1    enabled  -        pass   1024M DRAM
/N0/SB2/P0/B1/L3    enabled  -        pass   1024M DRAM
/N0/SB2/P1/B0/L0    enabled  -        pass   1024M DRAM
/N0/SB2/P1/B0/L2    enabled  -        pass   1024M DRAM
/N0/SB2/P1/B1/L1    enabled  -        pass   1024M DRAM
/N0/SB2/P1/B1/L3    enabled  -        pass   1024M DRAM
/N0/SB2/P2/B0/L0    enabled  -        pass   1024M DRAM
/N0/SB2/P2/B0/L2    enabled  -        pass   1024M DRAM
/N0/SB2/P2/B1/L1    enabled  -        pass   1024M DRAM
/N0/SB2/P2/B1/L3    enabled  -        pass   1024M DRAM
/N0/SB2/P3/B0/L0    enabled  -        pass   1024M DRAM
/N0/SB2/P3/B0/L2    enabled  -        pass   1024M DRAM
/N0/SB2/P3/B1/L1    enabled  -        pass   1024M DRAM
/N0/SB2/P3/B1/L3    enabled  -        pass   1024M DRAM
/N0/IB6/P0          enabled  -        pass   IO Controller 0
/N0/IB6/P1          enabled  -        pass   IO Controller 1
/N0/IB6/P0/B0       enabled  -        untest 66/33MHz. EPCI/PCI Bus
/N0/IB6/P0/B1       enabled  -        untest 33MHz PCI Bus
/N0/IB6/P1/B0       enabled  -        untest 66/33MHz. EPCI/PCI Bus
/N0/IB6/P1/B1       enabled  -        untest 66/33MHz. EPCI/PCI Bus
/N0/IB6/P1/B0/C0    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P1/B0/C1    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P1/B1/C2    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P1/B1/C3    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P0/B0/C4    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P0/B0/C5    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/RP0/            enabled  -        -      Repeater Board Slot 10
/N0/RP2/            enabled  -        -      Repeater Board Slot 12

coologin

在自检中还有一段

/N0/SB2 : Failed AR interconnect test. Status = 0e000fff

/N0/SB2 : Failed AR interconnect test. Status = 0e000fff
SB2/ar0 Bit in error L2_CMD_VLD [0]  
SB2/ar0 Bit in error L2_BIDIPAR   
SB2/ar0 Bit in error L2_ADDR [12]  
SB2/ar0 Bit in error L2_ADDR [11]  
SB2/ar0 Bit in error L2_ADDR [10]  
SB2/ar0 Bit in error L2_ADDR [9]  
SB2/ar0 Bit in error L2_ADDR [8]  
SB2/ar0 Bit in error L2_ADDR [7]  
SB2/ar0 Bit in error L2_ADDR [6]  
SB2/ar0 Bit in error L2_ADDR [5]  
SB2/ar0 Bit in error L2_ADDR [4]  
SB2/ar0 Bit in error L2_INCOMING [0]  
SB2/ar0 Bit in error L2_PREREQ [0]  
SB2/ar0 Bit in error L2_ADDR [22]  
SB2/ar0 Bit in error L2_ADDR [21]  
SB2/ar0 Bit in error L2_ADDR [20]  
SB2/ar0 Bit in error L2_ADDR [19]  
SB2/ar0 Bit in error L2_ADDR [18]  
SB2/ar0 Bit in error L2_ADDR [17]  
SB2/ar0 Bit in error L2_ADDR [16]  
SB2/ar0 Bit in error L2_ADDR [15]  
SB2/ar0 Bit in error L2_ADDR [14]  
SB2/ar0 Bit in error L2_ADDR [13]  
SB2/ar0 Bit in error L2_ADDR [33]  
SB2/ar0 Bit in error L2_ADDR [32]  
SB2/ar0 Bit in error L2_ADDR [31]  
SB2/ar0 Bit in error L2_ADDR [30]  
Tue Feb 05 21:40:13 hlrdbsrv1 lom: AR Interconnect test: System board SB2/ar0 address repeater connections to system board RP0/ar0 failed
SB2/ar0 Bit in error L2_ADDR [29]  
SB2/ar0 Bit in error L2_ADDR [28]  
SB2/ar0 Bit in error L2_ADDR [27]  
SB2/ar0 Bit in error L2_ADDR [26]  
SB2/ar0 Bit in error L2_ADDR [25]  
SB2/ar0 Bit in error L2_ADDR [24]  
SB2/ar0 Bit in error L2_ADDR [23]  
Tue Feb 05 21:40:24 hlrdbsrv1 lom: AR Interconnect test: System board SB2/ar0 address repeater connections to system board RP0/ar0 failed
Could not find error key:0
Could not find error key:20007ff
Could not find error key:0
Could not find error key:20007ff
Tue Feb 05 21:40:26 hlrdbsrv1 lom: AR Interconnect test: System board SB2/ar0 address repeater connections to system board RP0/ar0 failed
Tue Feb 05 21:40:26 hlrdbsrv1 lom: CPU Board V3 at /N0/SB2 has been removed from domain A due to a failure in interconnection test. Service action required.
Could not find error key:0
Could not find error key:20007ff

东方蜘蛛

换个SB2实施吧。。。

coologin

CPU/内存板在 POST 期间未能通过互连测试,多次后，SB2是否会被列入黑名单？
要将某组件列入黑名单，需要提供列入黑名单的名称。列入黑名单的名称源自组件所属
的系统和子系统。
文档给出两个命令
setls
showcomponet

如是否会出现如下现像？

sc0:sms-user:>  showcomponent -a SB0
Component SB0 is disabled: #High Voltage