boot cdrom 都可以卡死。。。。为什么？？求救。。

Cleo_Z

系统崩溃，我只好重装。。
可是boot cdrom，竟然不成功。。重新刻录了盘还是一样。。为什么？？？

怎么办啊。。。求救。。。

ok boot cdrom
Boot device: /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@3,0:f  File and args:

一直卡在这。。没有任何光标在动。。。。

小耳硕鼠

reset-all 一下

东方蜘蛛

设备型号？OS版本？能不能说清楚点～
pobe-scsi-all贴出来看看
devalias贴出来看看

Cleo_Z

回复 2# 小耳硕鼠

{0} ok probe-scsi-all
/pci@2,600000/emlx@0
Device  PortID 620700  WWPN 2041000b5d6a14e7

/pci@0,600000/pci@0/pci@8/pci@0/scsi@1

MPT Version 1.05, Firmware Version 1.11.00.00

Target 0
Unit 0   Disk     SEAGATE ST914603SSUN146G0B70    286739329 Blocks, 146 GB
  SASAddress 5000c5002c2aab89  PhyNum 0
Target 1
Unit 0   Disk     SEAGATE ST914603SSUN146G0B70    286739329 Blocks, 146 GB
  SASAddress 5000c50031d76a8d  PhyNum 1
Target 3
Unit 0   Removable Read Only device     TEAC    DV-W28SS-R      J.1A
  SATA device  PhyNum 3

{0} ok devalias
cdrom                    /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@3,0:f
net                      /pci@0,600000/pci@0/pci@8/pci@0/network@2
disk                     /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@0
mydev                    /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk
name                     aliases


   

Cleo_Z

回复 3# 东方蜘蛛

{0} ok probe-scsi-all
/pci@2,600000/emlx@0
Device  PortID 620700  WWPN 2041000b5d6a14e7

/pci@0,600000/pci@0/pci@8/pci@0/scsi@1

MPT Version 1.05, Firmware Version 1.11.00.00

Target 0
Unit 0   Disk     SEAGATE ST914603SSUN146G0B70    286739329 Blocks, 146 GB
  SASAddress 5000c5002c2aab89  PhyNum 0
Target 1
Unit 0   Disk     SEAGATE ST914603SSUN146G0B70    286739329 Blocks, 146 GB
  SASAddress 5000c50031d76a8d  PhyNum 1
Target 3
Unit 0   Removable Read Only device     TEAC    DV-W28SS-R      J.1A
  SATA device  PhyNum 3

{0} ok devalias
cdrom                    /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@3,0:f
net                      /pci@0,600000/pci@0/pci@8/pci@0/network@2
disk                     /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@0
mydev                    /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk
name                     aliases


   

Cleo_Z

回复 2# 小耳硕鼠


我重置了。。结局一样。。。。还是卡在那了。。
我把那个光盘拿下来看了看。。在普通笔记本上是可以读的。。。


   

qianxia0_

设备型号呢？post完整信息贴出来吧。

Cleo_Z

回复 7# qianxia0_


POST Sequence 01 CPU Check
POST Sequence 02 Banner
LSB#00 (XSB#00-0): POST 2.14.0 (2010/05/13 13:27)
POST Sequence 03 Fatal Check
POST Sequence 04 CPU Register
POST Sequence 05 STICK
POST Sequence 06 MMU
POST Sequence 07 Memory Initialize
POST Sequence 08 Memory
POST Sequence 09 Raw UE In Cache
POST Sequence 0A Floating Point Unit
POST Sequence 0B SC
POST Sequence 0C Cacheable Instruction
POST Sequence 0D Softint
POST Sequence 0E CPU Cross Call
POST Sequence 0F CMU-CH
POST Sequence 10 PCI-CH
POST Sequence 11 Master Device
POST Sequence 12 DSCP
POST Sequence 13 SC Check Before STICK Diag
POST Sequence 14 STICK Stop
POST Sequence 15 STICK Start
POST Sequence 16 Error CPU Check
POST Sequence 17 System Configuration
POST Sequence 18 System Status Check
POST Sequence 19 System Status Check After Sync
POST Sequence 1A OpenBoot Start...
POST Sequence Complete.

SPARC Enterprise M4000 Server, using Domain console
Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.
Copyright (c) 2010, Oracle and/or its affiliates and Fujitsu Limited. All rights reserved.
OpenBoot 4.24.15, 4096 MB memory installed, Serial #95380786.
Ethernet address 0:21:28:af:65:32, Host ID: 85af6532.
是这个么？


   

东方蜘蛛

Minimum Supported Solaris[tm] Operating Environment Versions:
OpenSolaris 2009.06
SPARC64 VI:
10 - 11/06 (U3) plus required patches (minimum) *
10 - 08/07 (U4) (recommended)
SPARC64 VII:
10 - 08/07 (U4) plus required patches (minimum) *
10 - 5/08 (U5) (recommended)

小耳硕鼠

我之前遇到过，在笔记本能读，但是boot cdrom 又引导不了的情况，换了一个厂商的光盘重新刻就可以了