为什么网卡必须在转换运行级别以后才能通？

jodgen

现在是通的呀，我是ssh上去的，就是重新启动后eth0不通，需要init 5才能通，这两个网卡分属不同网段，连接到不同的交换机。它们俩之间是不通的

jodgen

它们两之间是不通的

但现在它们能够连接到各自的网关

[root@Webquery ~]# ifconfig eth1
eth1      Link encap:Ethernet  HWaddr D83:857:EC:82  
          inet addr:192.168.1.201  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::dad3:85ff:fed7:ec82/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:371671 errors:0 dropped:0 overruns:0 frame:0
          TX packets:340048 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:55512672 (52.9 MiB)  TX bytes:46308317 (44.1 MiB)
          Interrupt:193

You have new mail in /var/spool/mail/root
[root@Webquery ~]# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:22:64:89:91:4C  
          inet addr:10.1.0.40  Bcast:10.1.0.255  Mask:255.255.255.0
          inet6 addr: fe80::222:64ff:fe89:914c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1109950 errors:0 dropped:0 overruns:0 frame:0
          TX packets:118966 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:72188852 (68.8 MiB)  TX bytes:33318602 (31.7 MiB)
          Memory:dfa80000-dfaa0000

[root@Webquery ~]# ping 192.168.1.200
PING 192.168.1.200 (192.168.1.200) 56(84) bytes of data.
64 bytes from 192.168.1.200: icmp_seq=1 ttl=128 time=0.143 ms
64 bytes from 192.168.1.200: icmp_seq=2 ttl=128 time=0.230 ms

--- 192.168.1.200 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.143/0.186/0.230/0.045 ms
[root@Webquery ~]# ping 10.1.0.1
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data.
64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.454 ms
64 bytes from 10.1.0.1: icmp_seq=2 ttl=64 time=0.493 ms

jodgen

wenhq 发表于 2013-05-20 09:49
这2个IP能ping 通不?

必须引用，才能招来大神:wink: ，麻烦了

wenhq

回复 21# jodgen


    那你找时间重起试试,看通不.

jodgen

wenhq 发表于 2013-05-20 10:19
回复 21# jodgen

这个是可以肯定的

重启以后，eth0不通，init 5后通，关键是该怎么来检查，比如我重启后在网络不通的情况下检查什么东西，然后init 5后通了再来检查什么东西，两相比较，是不是有可能发现问题在哪？

可我是unix菜鸟，不知道输什么命令，检查什么东西。

重启是随时可以的，因为这服务器的业务不是很繁忙，只是我需要跑到机房去init 5而已。

wenhq

重启动后,看ifconfig -a的eth1的状态,然后ping。如果有问题那就查系统日志。
你有远程控制卡的话那就不需要跑那么远了。远程即可操作。

jodgen

wenhq 发表于 2013-05-20 10:31
重启动后,看ifconfig -a的eth1的状态,然后ping。如果有问题那就查系统日志。
你有远程控制卡的话那就不需要 ...

重启后eth0不通，重启后的dmesg

[root@Webquery ~]# cat 1.txt
Linux version 2.6.18-128.el5PAE (mockbuild@hs20-bc1-5.build.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Dec 17 12:02:33 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf7a0000 (usable)
BIOS-e820: 00000000bf7a0000 - 00000000bf7ad000 (ACPI data)
BIOS-e820: 00000000bf7ad000 - 00000000bf7ae000 (ACPI NVS)
BIOS-e820: 00000000bf7ae000 - 00000000bf7ff000 (reserved)
BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
4224MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6e20
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
NX (Execute Disable) protection: active
On node 0 totalpages: 1310720
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 1081344 pages, LIFO batch:31
DMI 2.6 present.
Using APIC driver default
ACPI: RSDP (v002 PTLTD                                 ) @ 0x000f6df0
ACPI: XSDT (v001 HP     ProLiant 0x06040000  LTP 0x00000000) @ 0xbf7a8407
ACPI: FADT (v003 HP     LYNNFLD  0x06040000 PTL  0x00000002) @ 0xbf7ac6ad
ACPI: TCPA (v001 HP     ProLiant 0x06040000 LOHR 0x0000005a) @ 0xbf7ac7a1
ACPI: SSDT (v001  INTEL PPM RCM  0x80000001 INTL 0x20061109) @ 0xbf7a03ab
ACPI: SPMI (v005 HP     ProLiant 0x06040000 PTL  0x00000001) @ 0xbf7ac7f7
ACPI: EINJ (v001 HP     ProLiant 0x06040000 PTL  0x00000001) @ 0xbf7ac837
ACPI: HEST (v001 HP     ProLiant 0x06040000 PTL  0x00000001) @ 0xbf7ac9e7
ACPI: BERT (v001 HP     ProLiant 0x06040000 PTL  0x00000001) @ 0xbf7acb0f
ACPI: SSDT (v001 HP     ProLiant 0x06040000 INTL 0x20050624) @ 0xbf7acb3f
ACPI: ERST (v001 HP     ProLiant 0x06040000 PTL  0x00000001) @ 0xbf7acc20
ACPI: MADT (v001 HP     ProLiant 0x06040000  LTP 0x00000000) @ 0xbf7ace90
ACPI: MCFG (v001 HP     ProLiant 0x06040000  LTP 0x00000000) @ 0xbf7acf14
ACPI: HPET (v001 PTLTD  HPETTBL  0x06040000  LTP 0x00000001) @ 0xbf7acf50
ACPI: BOOT (v001 HP     ProLiant 0x06040000  LTP 0x00000001) @ 0xbf7acf88
ACPI: SPCR (v001 HP     ProLiant 0x06040000 PTL  0x00000001) @ 0xbf7acfb0
ACPI: DSDT (v001 HP     ProLiant 0x06040000 MSFT 0x03000000) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Processor #6 7:14 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a701 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
Detected 2394.063 MHz processor.
Built 1 zonelists.  Total pages: 1310720
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0752000 soft=c0732000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4135308k/5242880k available (2119k kernel code, 49140k reserved, 879k data, 228k init, 3268224k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 4790.95 BogoMIPS (lpj=2395475)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 28100000 00000000 00000000 0098e3fd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28100000 00000000 00000000 0098e3fd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 28100000 00000000 00000940 0098e3fd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 1/2 eip 3000
CPU 1 irqstacks, hard=c0753000 soft=c0733000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4787.95 BogoMIPS (lpj=239397
CPU: After generic identify, caps: bfebfbff 28100000 00000000 00000000 0098e3fd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28100000 00000000 00000000 0098e3fd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 28100000 00000000 00000940 0098e3fd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 2/4 eip 3000
CPU 2 irqstacks, hard=c0754000 soft=c0734000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4787.92 BogoMIPS (lpj=2393962)
CPU: After generic identify, caps: bfebfbff 28100000 00000000 00000000 0098e3fd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28100000 00000000 00000000 0098e3fd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: After all inits, caps: bfebfbff 28100000 00000000 00000940 0098e3fd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 3/6 eip 3000
CPU 3 irqstacks, hard=c0755000 soft=c0735000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4787.93 BogoMIPS (lpj=2393965)
CPU: After generic identify, caps: bfebfbff 28100000 00000000 00000000 0098e3fd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28100000 00000000 00000000 0098e3fd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: After all inits, caps: bfebfbff 28100000 00000000 00000940 0098e3fd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
Total of 4 processors activated (19154.76 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
migration_cost=57
checking if image is initramfs... it is
Freeing initrd memory: 3128k freed
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
Boot video device is 0000:1c:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: df000000-df8fffff
  PREFETCH window: de000000-deffffff
PCI: Bridge: 0000:00:1c.3
  IO window: disabled.
  MEM window: df900000-df9fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: 2000-2fff
  MEM window: dfa00000-dfafffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x38 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1369016821.985:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 31B497468CDD12CF
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 396k
Time: tsc clocksource has been installed.
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1a.0 to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1a.0
ehci_hcd 0000:00:1a.0: irq 169, io mem 0xdfd01800
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.0
ehci_hcd 0000:00:1d.0: irq 66, io mem 0xdfd01c00
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 18 (level, low) -> IRQ 185
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
usb 1-1: new high speed USB device using ehci_hcd and address 2
PCI: Setting latency timer of device 0000:00:1f.2 to 64

jodgen

续。。。。
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1830 ctl 0x1824 bmdma 0x1810 irq 185
ata2: SATA max UDMA/133 cmd 0x1828 ctl 0x1820 bmdma 0x1818 irq 185
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1.00: ATA-7: GB0500EAFJH, HPGB, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
usb 1-1.4: new high speed USB device using ehci_hcd and address 3
ata2: SATA link down (SStatus 0 SControl 300)
  Vendor: ATA       Model: GB0500EAFJH       Rev: HPGB
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write through
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1.4: configuration #1 chosen from 1 choice
input: Avocent Virtual Media KVM Module as /class/input/input0
input: USB HID v1.10 Keyboard [Avocent Virtual Media KVM Module] on usb-0000:00:1a.0-1.4
input: Avocent Virtual Media KVM Module as /class/input/input1
input: USB HID v1.10 Mouse [Avocent Virtual Media KVM Module] on usb-0000:00:1a.0-1.4
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1888 ctl 0x183c bmdma 0x1870 irq 177
ata4: SATA max UDMA/133 cmd 0x1880 ctl 0x1838 bmdma 0x1878 irq 177
usb 2-1.1: new full speed USB device using ehci_hcd and address 3
usb 2-1.1: configuration #1 chosen from 1 choice
input: ServerEngines SE USB Device as /class/input/input2
input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1.1
input: ServerEngines SE USB Device as /class/input/input3
input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1.1
usb 2-1.5: new low speed USB device using ehci_hcd and address 4
usb 2-1.5: configuration #1 chosen from 1 choice
input: Dell Dell USB Entry Keyboard as /class/input/input4
input: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.5
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: hp       DVDROM DH20N, EB00, max UDMA/100
ata3.00: configured for UDMA/100
usb 2-1.6: new low speed USB device using ehci_hcd and address 5
usb 2-1.6: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /class/input/input5
input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.6
ata4: SATA link down (SStatus 0 SControl 300)
  Vendor: hp        Model: DVDROM DH20N      Rev: EB00
  Type:   CD-ROM                             ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2429
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1369016846.163:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input6
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt 0000:20:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:20:00.0 to 64
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Generic PHY: Registered new driver
eth0: (PCI Express:2.5GB/s:Width x1) 00:22:64:89:91:4c
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 3, PHY: 8, PBA No: e56869-003
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 185
tg3.c:v3.93 (May 22, 200
ACPI: PCI Interrupt 0000:1e:00.0[A] -> GSI 19 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:1e:00.0 to 64
eth1: Tigon3 [partno(BCM95723) rev 5784100 PHY(5784)] (PCI Express) 10/100/1000Base-T Ethernet d8:d3:85:d7:ec:82
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 12x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
  Vendor: KVM       Model: vmDisk-CD         Rev: 0.01
  Type:   CD-ROM                             ANSI SCSI revision: 00
sr1: scsi3-mmc drive: 0x/0x caddy
sr 4:0:0:0: Attached scsi CD-ROM sr1
sr 4:0:0:0: Attached scsi generic sg2 type 5
usb-storage: device scan complete
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
usb 2-1.6: USB disconnect, address 5
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 5144568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:5144568k
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
usb 2-1.6: new low speed USB device using ehci_hcd and address 6
usb 2-1.6: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /class/input/input7
input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.6
tg3: eth1: Link is up at 100 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
eth0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team

jodgen

init 5后通了

/var/log/messages

May 20 10:27:46 Webquery kernel: klogd 1.4.1, log source = /proc/kmsg started.
May 20 10:27:46 Webquery kernel: Linux version 2.6.18-128.el5PAE (mockbuild@hs20-bc1-5.build.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Dec 17 12:02:33 EST 2008
May 20 10:27:46 Webquery kernel: BIOS-provided physical RAM map:
May 20 10:27:46 Webquery kernel:  BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 0000000000100000 - 00000000bf7a0000 (usable)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000bf7a0000 - 00000000bf7ad000 (ACPI data)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000bf7ad000 - 00000000bf7ae000 (ACPI NVS)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000bf7ae000 - 00000000bf7ff000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
May 20 10:27:46 Webquery kernel: 4224MB HIGHMEM available.
May 20 10:27:46 Webquery kernel: 896MB LOWMEM available.
May 20 10:27:46 Webquery kernel: found SMP MP-table at 000f6e20
May 20 10:27:46 Webquery rpc.statd[2879]: Version 1.0.9 Starting
May 20 10:27:46 Webquery kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
May 20 10:27:46 Webquery kernel: disabling kdump
May 20 10:27:46 Webquery kernel: NX (Execute Disable) protection: active
May 20 10:27:46 Webquery rpc.statd[2879]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user
May 20 10:27:46 Webquery kernel: DMI 2.6 present.
May 20 10:27:47 Webquery kernel: Using APIC driver default
May 20 10:27:47 Webquery hcid[2980]: Bluetooth HCI daemon
May 20 10:27:47 Webquery hcid[2980]: Register path:/org/bluez fallback:1
May 20 10:27:47 Webquery kernel: ACPI: PM-Timer IO Port: 0x1008
May 20 10:27:47 Webquery kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 20 10:27:47 Webquery kernel: Processor #0 7:14 APIC version 21
May 20 10:27:47 Webquery kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
May 20 10:27:47 Webquery kernel: Processor #2 7:14 APIC version 21
[root@Webquery log]# date
Mon May 20 10:39:10 CST 2013
[root@Webquery log]# vi messages

May 19 04:02:02 Webquery syslogd 1.4.1: restart.
May 20 09:25:06 Webquery gconfd (root-4216): Received signal 15, shutting down cleanly
May 20 09:25:06 Webquery gconfd (root-4216): Exiting
May 20 09:25:06 Webquery pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found
May 20 10:25:50 Webquery shutdown[4739]: shutting down for system reboot
May 20 10:25:51 Webquery smartd[3629]: smartd received signal 15: Terminated
May 20 10:25:51 Webquery smartd[3629]: smartd is exiting (exit status 0)
May 20 10:25:51 Webquery avahi-daemon[3472]: Got SIGTERM, quitting.
May 20 10:25:51 Webquery avahi-daemon[3472]: Leaving mDNS multicast group on interface eth1.IPv6 with address fe80::dad3:85ff:fed7:ec82.
May 20 10:25:51 Webquery avahi-daemon[3472]: Leaving mDNS multicast group on interface eth1.IPv4 with address 192.168.1.201.
May 20 10:25:51 Webquery avahi-daemon[3472]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::222:64ff:fe89:914c.
May 20 10:25:51 Webquery avahi-daemon[3472]: Leaving mDNS multicast group on interface eth0.IPv4 with address 10.1.0.40.
May 20 10:25:53 Webquery xinetd[3262]: Exiting...
May 20 10:25:56 Webquery hcid[3005]: Got disconnected from the system message bus
May 20 10:25:56 Webquery nm-system-settings: disconnected from the system bus, exiting.
May 20 10:25:56 Webquery rpc.statd[2904]: Caught signal 15, un-registering and exiting.
May 20 10:25:57 Webquery auditd[2781]: The audit daemon is exiting.
May 20 10:25:57 Webquery kernel: audit(1369016757.138:800): audit_pid=0 old=2781 by auid=4294967295
May 20 10:25:57 Webquery pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide
May 20 10:25:57 Webquery pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped
May 20 10:25:58 Webquery pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function
May 20 10:25:58 Webquery pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run
May 20 10:25:58 Webquery kernel: Kernel logging (proc) stopped.
May 20 10:25:58 Webquery kernel: Kernel log daemon terminating.
May 20 10:25:59 Webquery exiting on signal 15
May 20 10:27:45 Webquery syslogd 1.4.1: restart.
May 20 10:27:46 Webquery kernel: klogd 1.4.1, log source = /proc/kmsg started.
May 20 10:27:46 Webquery kernel: Linux version 2.6.18-128.el5PAE (mockbuild@hs20-bc1-5.build.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Dec 17 12:02:33 EST 2008
May 20 10:27:46 Webquery kernel: BIOS-provided physical RAM map:
May 20 10:27:46 Webquery kernel:  BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 0000000000100000 - 00000000bf7a0000 (usable)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000bf7a0000 - 00000000bf7ad000 (ACPI data)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000bf7ad000 - 00000000bf7ae000 (ACPI NVS)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000bf7ae000 - 00000000bf7ff000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
May 20 10:27:46 Webquery kernel:  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
May 20 10:27:46 Webquery kernel: 4224MB HIGHMEM available.
May 20 10:27:46 Webquery kernel: 896MB LOWMEM available.
May 20 10:27:46 Webquery kernel: found SMP MP-table at 000f6e20
May 20 10:27:46 Webquery rpc.statd[2879]: Version 1.0.9 Starting
May 20 10:27:46 Webquery kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
May 20 10:27:46 Webquery kernel: disabling kdump
May 20 10:27:46 Webquery kernel: NX (Execute Disable) protection: active
May 20 10:27:46 Webquery rpc.statd[2879]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user
May 20 10:27:46 Webquery kernel: DMI 2.6 present.
May 20 10:27:47 Webquery kernel: Using APIC driver default
May 20 10:27:47 Webquery hcid[2980]: Bluetooth HCI daemon
May 20 10:27:47 Webquery hcid[2980]: Register path:/org/bluez fallback:1
May 20 10:27:47 Webquery kernel: ACPI: PM-Timer IO Port: 0x1008
May 20 10:27:47 Webquery kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 20 10:27:47 Webquery kernel: Processor #0 7:14 APIC version 21
May 20 10:27:47 Webquery kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
May 20 10:27:47 Webquery kernel: Processor #2 7:14 APIC version 21
May 20 10:27:47 Webquery kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
May 20 10:27:47 Webquery kernel: Processor #4 7:14 APIC version 21
May 20 10:27:47 Webquery kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
May 20 10:27:47 Webquery kernel: Processor #6 7:14 APIC version 21
May 20 10:27:47 Webquery kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
May 20 10:27:47 Webquery kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
May 20 10:27:47 Webquery kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
May 20 10:27:47 Webquery kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
May 20 10:27:47 Webquery pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
May 20 10:27:47 Webquery kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
May 20 10:27:47 Webquery sdpd[2984]: Bluetooth SDP daemon
May 20 10:27:47 Webquery hidd[3093]: Bluetooth HID daemon
May 20 10:27:48 Webquery kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
May 20 10:27:48 Webquery pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-egate.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
May 20 10:27:48 Webquery automount[3117]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
May 20 10:27:48 Webquery kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
May 20 10:27:48 Webquery pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
May 20 10:27:48 Webquery kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
May 20 10:27:49 Webquery kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
May 20 10:27:49 Webquery kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
May 20 10:27:49 Webquery kernel: Using ACPI (MADT) for SMP configuration information
May 20 10:27:49 Webquery kernel: Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
May 20 10:27:49 Webquery kernel: Detected 2394.063 MHz processor.
May 20 10:27:49 Webquery kernel: Built 1 zonelists.  Total pages: 1310720
May 20 10:27:49 Webquery kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
May 20 10:27:49 Webquery kernel: Enabling fast FPU save and restore... done.
May 20 10:27:50 Webquery kernel: Enabling unmasked SIMD FPU exception support... done.
May 20 10:27:50 Webquery kernel: Initializing CPU#0
May 20 10:27:50 Webquery kernel: CPU 0 irqstacks, hard=c0752000 soft=c0732000
May 20 10:27:50 Webquery kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
May 20 10:27:50 Webquery kernel: Console: colour VGA+ 80x25
May 20 10:27:50 Webquery kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 20 10:27:50 Webquery kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 20 10:27:50 Webquery kernel: Memory: 4135308k/5242880k available (2119k kernel code, 49140k reserved, 879k data, 228k init, 3268224k highmem)
May 20 10:27:51 Webquery kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
May 20 10:27:51 Webquery kernel: hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
May 20 10:27:50 Webquery gpm[3314]: *** info [startup.c(95)]:
May 20 10:27:51 Webquery kernel: hpet0: 8 64-bit timers, 14318180 Hz
May 20 10:27:51 Webquery gpm[3314]: Started gpm successfully. Entered daemon mode.
May 20 10:27:52 Webquery kernel: Using HPET for base-timer
May 20 10:27:52 Webquery avahi-daemon[3447]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
May 20 10:27:53 Webquery kernel: Calibrating delay using timer specific routine.. 4790.95 BogoMIPS (lpj=2395475)
May 20 10:27:53 Webquery avahi-daemon[3447]: Successfully dropped root privileges.
May 20 10:27:53 Webquery kernel: Security Framework v1.0.0 initialized
May 20 10:27:53 Webquery avahi-daemon[3447]: avahi-daemon 0.6.16 starting up.
May 20 10:27:53 Webquery kernel: SELinux:  Initializing.
May 20 10:27:53 Webquery avahi-daemon[3447]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May 20 10:27:54 Webquery avahi-daemon[3447]: Successfully called chroot().
May 20 10:27:54 Webquery kernel: selinux_register_security:  Registering secondary module capability
May 20 10:27:54 Webquery avahi-daemon[3447]: Successfully dropped remaining capabilities.
May 20 10:27:54 Webquery kernel: Capability LSM initialized as secondary
May 20 10:27:54 Webquery avahi-daemon[3447]: Loading service file /services/sftp-ssh.service.
May 20 10:27:54 Webquery kernel: Mount-cache hash table entries: 512
May 20 10:27:55 Webquery avahi-daemon[3447]: New relevant interface eth1.IPv6 for mDNS.
May 20 10:27:55 Webquery avahi-daemon[3447]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::dad3:85ff:fed7:ec82.
May 20 10:27:55 Webquery kernel: monitor/mwait feature present.
May 20 10:27:55 Webquery avahi-daemon[3447]: New relevant interface eth1.IPv4 for mDNS.
May 20 10:27:55 Webquery kernel: using mwait in idle threads.
May 20 10:27:55 Webquery avahi-daemon[3447]: Joining mDNS multicast group on interface eth1.IPv4 with address 192.168.1.201.
May 20 10:27:55 Webquery kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
May 20 10:27:55 Webquery avahi-daemon[3447]: New relevant interface eth0.IPv6 for mDNS.
May 20 10:27:56 Webquery kernel: CPU: L2 cache: 256K
May 20 10:27:56 Webquery avahi-daemon[3447]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::222:64ff:fe89:914c.
May 20 10:27:56 Webquery kernel: CPU: L3 cache: 8192K
May 20 10:27:56 Webquery avahi-daemon[3447]: New relevant interface eth0.IPv4 for mDNS.
May 20 10:27:56 Webquery kernel: CPU: Physical Processor ID: 0
May 20 10:27:56 Webquery avahi-daemon[3447]: Joining mDNS multicast group on interface eth0.IPv4 with address 10.1.0.40.
May 20 10:27:56 Webquery kernel: CPU: Processor Core ID: 0
May 20 10:27:56 Webquery avahi-daemon[3447]: Network interface enumeration completed.
May 20 10:27:57 Webquery kernel: Intel machine check architecture supported.
May 20 10:27:57 Webquery avahi-daemon[3447]: Registering new address record for fe80::dad3:85ff:fed7:ec82 on eth1.
May 20 10:27:57 Webquery kernel: Intel machine check reporting enabled on CPU#0.
May 20 10:27:57 Webquery avahi-daemon[3447]: Registering new address record for 192.168.1.201 on eth1.
May 20 10:27:57 Webquery kernel: Checking 'hlt' instruction... OK.
May 20 10:27:57 Webquery avahi-daemon[3447]: Registering new address record for fe80::222:64ff:fe89:914c on eth0.
May 20 10:27:57 Webquery kernel: SMP alternatives: switching to UP code
May 20 10:27:57 Webquery avahi-daemon[3447]: Registering new address record for 10.1.0.40 on eth0.
May 20 10:27:57 Webquery kernel: ACPI: Core revision 20060707
May 20 10:27:57 Webquery avahi-daemon[3447]: Registering HINFO record with values 'I686'/'LINUX'.
May 20 10:27:57 Webquery kernel: CPU0: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
May 20 10:27:58 Webquery kernel: SMP alternatives: switching to SMP code
May 20 10:27:58 Webquery kernel: Booting processor 1/2 eip 3000
May 20 10:27:58 Webquery kernel: CPU 1 irqstacks, hard=c0753000 soft=c0733000
May 20 10:27:58 Webquery kernel: Initializing CPU#1
May 20 10:27:58 Webquery kernel: Calibrating delay using timer specific routine.. 4787.95 BogoMIPS (lpj=239397
May 20 10:27:58 Webquery kernel: monitor/mwait feature present.
May 20 10:27:58 Webquery kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
May 20 10:27:58 Webquery kernel: CPU: L2 cache: 256K
May 20 10:27:58 Webquery kernel: CPU: L3 cache: 8192K
May 20 10:27:58 Webquery kernel: CPU: Physical Processor ID: 0
May 20 10:27:58 Webquery kernel: CPU: Processor Core ID: 1
May 20 10:27:58 Webquery avahi-daemon[3447]: Server startup complete. Host name is Webquery.local. Local service cookie is 3271048815.
May 20 10:27:58 Webquery xinetd[3237]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
May 20 10:27:58 Webquery kernel: Intel machine check architecture supported.
May 20 10:27:58 Webquery xinetd[3237]: Started working: 0 available services
May 20 10:27:58 Webquery kernel: Intel machine check reporting enabled on CPU#1.
May 20 10:27:59 Webquery kernel: CPU1: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
May 20 10:27:59 Webquery kernel: SMP alternatives: switching to SMP code
May 20 10:27:59 Webquery kernel: Booting processor 2/4 eip 3000
May 20 10:27:59 Webquery kernel: CPU 2 irqstacks, hard=c0754000 soft=c0734000
May 20 10:27:59 Webquery kernel: Initializing CPU#2
May 20 10:27:59 Webquery kernel: Calibrating delay using timer specific routine.. 4787.92 BogoMIPS (lpj=2393962)
May 20 10:27:59 Webquery kernel: monitor/mwait feature present.
May 20 10:27:59 Webquery kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
May 20 10:27:59 Webquery kernel: CPU: L2 cache: 256K
May 20 10:27:59 Webquery kernel: CPU: L3 cache: 8192K
May 20 10:27:59 Webquery kernel: CPU: Physical Processor ID: 0
May 20 10:27:59 Webquery kernel: CPU: Processor Core ID: 2
May 20 10:27:59 Webquery kernel: Intel machine check architecture supported.
May 20 10:27:59 Webquery kernel: Intel machine check reporting enabled on CPU#2.
May 20 10:27:59 Webquery kernel: CPU2: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
May 20 10:27:59 Webquery kernel: SMP alternatives: switching to SMP code
May 20 10:27:59 Webquery kernel: Booting processor 3/6 eip 3000
May 20 10:27:59 Webquery kernel: CPU 3 irqstacks, hard=c0755000 soft=c0735000
May 20 10:27:59 Webquery kernel: Initializing CPU#3
May 20 10:27:59 Webquery avahi-daemon[3447]: Service "SFTP File Transfer on Webquery" (/services/sftp-ssh.service) successfully established.
May 20 10:27:59 Webquery kernel: Calibrating delay using timer specific routine.. 4787.93 BogoMIPS (lpj=2393965)
May 20 10:27:59 Webquery kernel: monitor/mwait feature present.
May 20 10:27:59 Webquery kernel: CPU: L1 I cache: 32K, L1 D cache: 32K

jodgen

May 20 10:28:00 Webquery kernel: CPU: L2 cache: 256K
May 20 10:28:00 Webquery kernel: CPU: L3 cache: 8192K
May 20 10:28:00 Webquery kernel: CPU: Physical Processor ID: 0
May 20 10:28:00 Webquery kernel: CPU: Processor Core ID: 3
May 20 10:28:00 Webquery kernel: Intel machine check architecture supported.
May 20 10:28:00 Webquery kernel: Intel machine check reporting enabled on CPU#3.
May 20 10:28:00 Webquery kernel: CPU3: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
May 20 10:28:00 Webquery kernel: Total of 4 processors activated (19154.76 BogoMIPS).
May 20 10:28:00 Webquery kernel: ENABLING IO-APIC IRQs
May 20 10:28:00 Webquery kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
May 20 10:28:00 Webquery kernel: checking TSC synchronization across 4 CPUs: passed.
May 20 10:28:00 Webquery kernel: Brought up 4 CPUs
May 20 10:28:00 Webquery kernel: migration_cost=57
May 20 10:28:00 Webquery kernel: checking if image is initramfs... it is
May 20 10:28:00 Webquery kernel: Freeing initrd memory: 3128k freed
May 20 10:28:00 Webquery kernel: NET: Registered protocol family 16
May 20 10:28:00 Webquery kernel: No dock devices found.
May 20 10:28:00 Webquery kernel: ACPI: bus type pci registered
May 20 10:28:00 Webquery kernel: PCI: Using MMCONFIG
May 20 10:28:00 Webquery kernel: Setting up standard PCI resources
May 20 10:28:00 Webquery kernel: ACPI: Interpreter enabled
May 20 10:28:00 Webquery kernel: ACPI: Using IOAPIC for interrupt routing
May 20 10:28:00 Webquery kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
May 20 10:28:00 Webquery kernel: PCI: Transparent bridge - 0000:00:1e.0
May 20 10:28:01 Webquery smartd[3602]: smartd version 5.38 [i686-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
May 20 10:28:01 Webquery smartd[3602]: Home page is http://smartmontools.sourceforge.net/
May 20 10:28:01 Webquery kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
May 20 10:28:01 Webquery smartd[3602]: Opened configuration file /etc/smartd.conf
May 20 10:28:01 Webquery kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
May 20 10:28:01 Webquery smartd[3602]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
May 20 10:28:01 Webquery kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
May 20 10:28:01 Webquery kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
May 20 10:28:01 Webquery kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 20 10:28:01 Webquery kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
May 20 10:28:01 Webquery kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 20 10:28:01 Webquery kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 *7 10 11 14 15)
May 20 10:28:01 Webquery smartd[3602]: Problem creating device name scan list
May 20 10:28:01 Webquery smartd[3602]: Device: /dev/sda, opened
May 20 10:28:01 Webquery kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
May 20 10:28:01 Webquery smartd[3602]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer.
May 20 10:28:01 Webquery kernel: pnp: PnP ACPI init
May 20 10:28:01 Webquery smartd[3602]: Device: /dev/sda, opened
May 20 10:28:01 Webquery kernel: pnp: PnP ACPI: found 10 devices
May 20 10:28:01 Webquery smartd[3602]: Device: /dev/sda, not found in smartd database.
May 20 10:28:02 Webquery kernel: usbcore: registered new driver usbfs
May 20 10:28:02 Webquery kernel: usbcore: registered new driver hub
May 20 10:28:02 Webquery smartd[3602]: Device: /dev/sda, is SMART capable. Adding to "monitor" list.
May 20 10:28:02 Webquery kernel: PCI: Using ACPI for IRQ routing
May 20 10:28:02 Webquery smartd[3602]: Monitoring 0 ATA and 1 SCSI devices
May 20 10:28:02 Webquery kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
May 20 10:28:02 Webquery smartd[3604]: smartd has fork()ed into background mode. New PID=3604.
May 20 10:28:02 Webquery kernel: PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
May 20 10:28:02 Webquery kernel: PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
May 20 10:28:02 Webquery kernel: NetLabel: Initializing
May 20 10:28:02 Webquery kernel: NetLabel:  domain hash size = 128
May 20 10:28:02 Webquery kernel: NetLabel:  protocols = UNLABELED CIPSOv4
May 20 10:28:02 Webquery kernel: NetLabel:  unlabeled traffic allowed by default
May 20 10:28:02 Webquery kernel: PCI: Bridge: 0000:00:03.0
May 20 10:28:02 Webquery kernel:   IO window: disabled.
May 20 10:28:03 Webquery kernel:   MEM window: disabled.
May 20 10:28:03 Webquery kernel:   PREFETCH window: disabled.
May 20 10:28:03 Webquery kernel: PCI: Bridge: 0000:00:1c.0
May 20 10:28:03 Webquery kernel:   IO window: disabled.
May 20 10:28:03 Webquery kernel:   MEM window: disabled.
May 20 10:28:03 Webquery kernel:   PREFETCH window: disabled.
May 20 10:28:03 Webquery kernel: PCI: Bridge: 0000:00:1c.1
May 20 10:28:03 Webquery kernel:   IO window: disabled.
May 20 10:28:03 Webquery kernel:   MEM window: disabled.
May 20 10:28:03 Webquery kernel:   PREFETCH window: disabled.
May 20 10:28:03 Webquery kernel: PCI: Bridge: 0000:00:1c.2
May 20 10:28:03 Webquery kernel:   IO window: disabled.
May 20 10:28:03 Webquery kernel:   MEM window: df000000-df8fffff
May 20 10:28:03 Webquery kernel:   PREFETCH window: de000000-deffffff
May 20 10:28:03 Webquery kernel: PCI: Bridge: 0000:00:1c.3
May 20 10:28:03 Webquery kernel:   IO window: disabled.
May 20 10:28:03 Webquery kernel:   MEM window: df900000-df9fffff
May 20 10:28:03 Webquery kernel:   PREFETCH window: disabled.
May 20 10:28:03 Webquery kernel: PCI: Bridge: 0000:00:1c.4
May 20 10:28:03 Webquery kernel:   IO window: 2000-2fff
May 20 10:28:03 Webquery kernel:   MEM window: dfa00000-dfafffff
May 20 10:28:03 Webquery kernel:   PREFETCH window: disabled.
May 20 10:28:03 Webquery kernel: PCI: Bridge: 0000:00:1e.0
May 20 10:28:04 Webquery kernel:   IO window: disabled.
May 20 10:28:04 Webquery kernel:   MEM window: disabled.
May 20 10:28:04 Webquery kernel:   PREFETCH window: disabled.
May 20 10:28:04 Webquery kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
May 20 10:28:04 Webquery kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
May 20 10:28:04 Webquery kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
May 20 10:28:04 Webquery kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
May 20 10:28:04 Webquery kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
May 20 10:28:04 Webquery kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
May 20 10:28:04 Webquery kernel: NET: Registered protocol family 2
May 20 10:28:04 Webquery kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
May 20 10:28:04 Webquery kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
May 20 10:28:04 Webquery kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
May 20 10:28:04 Webquery kernel: TCP: Hash tables configured (established 131072 bind 65536)
May 20 10:28:04 Webquery kernel: TCP reno registered
May 20 10:28:04 Webquery kernel: Simple Boot Flag at 0x38 set to 0x1
May 20 10:28:04 Webquery kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
May 20 10:28:04 Webquery kernel: apm: disabled - APM is not SMP safe.
May 20 10:28:04 Webquery kernel: audit: initializing netlink socket (disabled)
May 20 10:28:04 Webquery kernel: type=2000 audit(1369016821.985:1): initialized
May 20 10:28:04 Webquery kernel: highmem bounce pool size: 64 pages
May 20 10:28:04 Webquery kernel: Total HugeTLB memory allocated, 0
May 20 10:28:05 Webquery kernel: VFS: Disk quotas dquot_6.5.1
May 20 10:28:05 Webquery kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 20 10:28:05 Webquery kernel: Initializing Cryptographic API
May 20 10:28:05 Webquery kernel: alg: No test for crc32c (crc32c-generic)
May 20 10:28:05 Webquery kernel: ksign: Installing public key data
May 20 10:28:05 Webquery kernel: Loading keyring
May 20 10:28:05 Webquery kernel: - Added public key 31B497468CDD12CF
May 20 10:28:05 Webquery kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
May 20 10:28:05 Webquery kernel: io scheduler noop registered
May 20 10:28:05 Webquery kernel: io scheduler anticipatory registered
May 20 10:28:05 Webquery kernel: io scheduler deadline registered
May 20 10:28:05 Webquery kernel: io scheduler cfq registered (default)
May 20 10:28:05 Webquery kernel: assign_interrupt_mode Found MSI capability
May 20 10:28:06 Webquery last message repeated 5 times
May 20 10:28:06 Webquery kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 20 10:28:06 Webquery kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
May 20 10:28:06 Webquery kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
May 20 10:28:06 Webquery kernel: ACPI: Processor [CPU2] (supports 8 throttling states)
May 20 10:28:06 Webquery kernel: ACPI: Processor [CPU3] (supports 8 throttling states)
May 20 10:28:06 Webquery kernel: Real Time Clock Driver v1.12ac
May 20 10:28:06 Webquery kernel: Non-volatile memory driver v1.2
May 20 10:28:06 Webquery kernel: Linux agpgart interface v0.101 (c) Dave Jones
May 20 10:28:06 Webquery kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
May 20 10:28:06 Webquery kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 20 10:28:06 Webquery kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 20 10:28:06 Webquery kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
May 20 10:28:06 Webquery kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
May 20 10:28:06 Webquery kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 20 10:28:08 Webquery kernel: ide-floppy driver 0.99.newide
May 20 10:28:08 Webquery kernel: usbcore: registered new driver hiddev
May 20 10:28:08 Webquery kernel: usbcore: registered new driver usbhid
May 20 10:28:08 Webquery kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
May 20 10:28:08 Webquery kernel: PNP: No PS/2 controller found. Probing ports directly.
May 20 10:28:08 Webquery kernel: i8042.c: No controller found.
May 20 10:28:08 Webquery kernel: mice: PS/2 mouse device common for all mice
May 20 10:28:08 Webquery kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
May 20 10:28:08 Webquery kernel: md: bitmap version 4.39
May 20 10:28:08 Webquery kernel: TCP bic registered
May 20 10:28:08 Webquery kernel: Initializing IPsec netlink socket
May 20 10:28:08 Webquery kernel: NET: Registered protocol family 1
May 20 10:28:08 Webquery kernel: NET: Registered protocol family 17
May 20 10:28:08 Webquery kernel: Using IPI No-Shortcut mode
May 20 10:28:08 Webquery kernel: ACPI: (supports S0 S4 S5)
May 20 10:28:08 Webquery kernel: Freeing unused kernel memory: 228k freed
May 20 10:28:08 Webquery kernel: Write protecting the kernel read-only data: 396k
May 20 10:28:08 Webquery kernel: Time: tsc clocksource has been installed.
May 20 10:28:08 Webquery kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
May 20 10:28:08 Webquery kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller
May 20 10:28:08 Webquery kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
May 20 10:28:08 Webquery kernel: ehci_hcd 0000:00:1a.0: debug port 2
May 20 10:28:08 Webquery kernel: ehci_hcd 0000:00:1a.0: irq 169, io mem 0xdfd01800
May 20 10:28:08 Webquery kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 20 10:28:09 Webquery kernel: usb usb1: configuration #1 chosen from 1 choice
May 20 10:28:09 Webquery kernel: hub 1-0:1.0: USB hub found
May 20 10:28:09 Webquery kernel: hub 1-0:1.0: 2 ports detected
May 20 10:28:09 Webquery kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66
May 20 10:28:09 Webquery kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller
May 20 10:28:09 Webquery kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
May 20 10:28:09 Webquery kernel: ehci_hcd 0000:00:1d.0: debug port 2
May 20 10:28:09 Webquery kernel: ehci_hcd 0000:00:1d.0: irq 66, io mem 0xdfd01c00
May 20 10:28:09 Webquery kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 20 10:28:09 Webquery kernel: usb usb2: configuration #1 chosen from 1 choice
May 20 10:28:09 Webquery kernel: hub 2-0:1.0: USB hub found
May 20 10:28:09 Webquery kernel: hub 2-0:1.0: 2 ports detected
May 20 10:28:09 Webquery kernel: USB Universal Host Controller Interface driver v3.0
May 20 10:28:09 Webquery kernel: SCSI subsystem initialized