- 论坛徽章:
- 0
|
Firmware Version 46.34
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 1000 MHz Active Functional 33554432 33554432
1 1000 MHz Idle Functional 33554432 33554432
Central Bus Speed (in MHz) : 200
Available Memory : 2097152 KB
Good Memory Required : Not initialized. Defaults to 32 MB.
Primary boot path: 0/1/1/0.0
Alternate boot path: 0/1/1/0.1
Console path: 0/7/1/1.0
Keyboard path: 0/0/4/0.0
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1
IPL error: bad LIF magic.
.... FAILED.
Trying Alternate Boot Path
--------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1
IPL error: bad LIF magic.
.... FAILED.
Trying Default Boot Path(s)
--------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1
IPL error: bad LIF magic.
.... FAILED.
Booting...
Failed to initialize with ENTRY_INIT Status = -7
fffffff9 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
454e4841 0 0 454e4841
0 0 0 0
0 0 0 0
.... FAILED.
Terminating selection process.
No boot device found.
---- Main Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu > sea\
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
IODC
Path# Device Path (dec) Device Path (mnem) Device Type Rev
----- ----------------- ------------------ ----------- ----
P0 0/0/2/0.0 ide.0 Random access media 1 光驱
P1 0/1/1/0.1 intscsia.1 Random access media 1
P2 0/1/1/0.0 intscsia.0 Random access media 1
Main Menu: Enter command or menu > boot p0
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL> display
Fastsize value is 0000000F
Autoboot is ON (enabled)
Autosearch is ON (enabled)
Primary boot path is 0/1/1/0.0.0.0.0.0.0
Primary boot path is (hex) 0/1/1/0.0.0.0.0.0.0
Alternate boot path is 0/1/1/0.1.0.0.0.0.0
Alternate boot path is (hex) 0/1/1/0.1.0.0.0.0.0
System console path is 0/7/1/1.0.0.0.0.0.0
System console path is (hex) 0/7/1/1.0.0.0.0.0.0
ISL> help
HELP Help Facility
LS List ISL utilities
AUTOBOOT Set or clear autoboot flag in stable storage
AUTOSEARCH Set or clear autosearch flag in stable storage
PRIMPATH Modify primary boot path in stable storage
ALTPATH Modify alternate boot path in stable storage
CONSPATH Modify system console path in stable storage
DISPLAY Display boot and console paths in stable storage
LSAUTOFL List contents of autoboot file
FASTSIZE Sets or displays FASTSIZE
800SUPPORT Boots the s800 Support Kernel from the boot device
700SUPPORT Boot the s700 Support Kernel from the boot device
READNVM Displays contents of one word of NVM
READSS Displays contents of one word of stable storage
LSBATCH List contents of batch file
BATCH Execute commands in batch file
LSEST List contents of EST (Extended Self Test) file
EST Execute commands in EST (Extended Self Test) file
Enter 'LS' to see a list of the ISL utilities.
ISL> boot hpux
Not an isl command or utility.
Not an isl command or utility.
ISL> autoboot
Enter ON or OFF: on
Autoboot is ON (enabled).
ISL>
ISL> help
HELP Help Facility
LS List ISL utilities
AUTOBOOT Set or clear autoboot flag in stable storage
AUTOSEARCH Set or clear autosearch flag in stable storage
PRIMPATH Modify primary boot path in stable storage
ALTPATH Modify alternate boot path in stable storage
CONSPATH Modify system console path in stable storage
DISPLAY Display boot and console paths in stable storage
LSAUTOFL List contents of autoboot file
FASTSIZE Sets or displays FASTSIZE
800SUPPORT Boots the s800 Support Kernel from the boot device
700SUPPORT Boot the s700 Support Kernel from the boot device
READNVM Displays contents of one word of NVM
READSS Displays contents of one word of stable storage
LSBATCH List contents of batch file
BATCH Execute commands in batch file
LSEST List contents of EST (Extended Self Test) file
EST Execute commands in EST (Extended Self Test) file
Enter 'LS' to see a list of the ISL utilities.
ISL> LS
Utilities on this system are:
filename type start size created
=====================================================
HPUX -12928 213064 848 06/09/28 19:44:03
ISL> hpux
Boot
: disk(0/0/2/0.0.0.0.0.0.0;0)/stand/vmunix
disk(0/0/2/0.0.0.0.0.0.0;0)/stand/vmunix: cannot open, or not executable
Exec failed: No such file or directory
ISL>
|
|
免费注册
发表于 2013-06-06 10:58
发表于 2013-06-06 11:58
