T3-1有块硬盘认不到

东方蜘蛛

# sas2ircu
LSI Corporation SAS2 IR Configuration Utility.
Version 6.250.02.00 (2010.06.30)
Copyright (c) 2009-2010 LSI Corporation. All rights reserved.

SAS2IRCU: No command specified.
  sas2ircu <controller #> <command> <parameters> ...
    where <controller #> is:
      Number between 0 and 255
    where <command> is:
      DISPLAY    - display controller, volume and physical device info
      LIST       - Lists all available LSI adapters (does not need ctlr #>
      CREATE     - create an IR volume
      DELETE     - Delete entire RAID configuration on the selected controller
      DELETEVOLUME  - Delete a specific RAID Volume on the selected controller
      HOTSPARE   - make drive a hot spare
      STATUS     - display current volume status info
      CONSTCHK   - Start Consistency Check operation on the specified IR Volume
      ACTIVATE   - Activate an Inactive IR volume
      LOCATE     - Locate a disk drive on an enclosure
      LOGIR      - Upload or Clear IR Log data
      BOOTIR     - Select an IR Boot Volume as primary boot device
      BOOTENCL   - Select an Enclosure/Bay as primary boot device
    where <parameters> are:
      Command specific values; enter "sas2ircu <controller #> <command>"
      to get command specific help

kwtip

蜘蛛哥啊，有没有文档案例什么的，现在遇到这种情况了，可能过几天就要去搞，嗨没弄过心里没底。回复 11# 东方蜘蛛


   

nimysun

kwtip 发表于 2014-04-24 22:47
蜘蛛哥啊，有没有文档案例什么的，现在遇到这种情况了，可能过几天就要去搞，嗨没弄过心里没底。回复 11# 东 ...

通用的做法，先得看是什么Raid hba, 然后收集相应的信息。

SGX-SAS6-R-INT-Z
(MegaCLI)

SGX-SAS6-INT-Z
sas2ircu

通用的日志/var/log/messages*

loveradmin

看看你的背板是不是有问题？ 然后devfsadm