免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 23366 | 回复: 8

[求助] 关于rx6600中MP卡的命令 [复制链接]

论坛徽章:
0
发表于 2014-04-09 23:56 |显示全部楼层
各位大哥,

我因为rx6600的mp卡的串口失效了,想通过ip口登录,运行xd命令重启一下mp卡,但是直接运行xd后,如下提示:


==== MP Help: General Configuration ===========================================

  XD  : Diagnostics and/or Reset of MP

Command access level: MP Configuration access - for resetting MP,
                      Console access - for all other XD options.
This command allows the user to perform some simple checks to confirm the
health of MP and its connectivity status.  The following tests are
available:
      * MP Parameter Checksum in NVRAM
      * Verify I2C connection (Get BMC Device ID)
      * LAN connectivity test using "ping"
      * History of FW updates and other activities

Also, MP can be reset from this command.  MP reset can be safely
performed without affecting the operation of the server.

Command line usage:
  XD [ -parameter | -i2c | -lan <ipaddr> | -reset | -hist ] [ -nc ]


我运行xd -reset后,又提示“Unrecognized command or topic...”,请问是怎么回事啊?

另外想问一下Reset BMC的命令RB是怎么运行啊,我也是碰到同样的问题。

论坛徽章:
48
15-16赛季CBA联赛之青岛
日期:2021-01-07 13:41:2315-16赛季CBA联赛之上海
日期:2020-12-01 18:02:0720周年集字徽章-20	
日期:2020-10-28 14:14:2620周年集字徽章-20	
日期:2020-10-28 14:04:3015-16赛季CBA联赛之天津
日期:2020-10-18 22:51:412016猴年福章徽章
日期:2016-02-18 15:30:3415-16赛季CBA联赛之北控
日期:2015-12-22 13:30:48操作系统版块每日发帖之星
日期:2015-12-07 06:20:00操作系统版块每日发帖之星
日期:2015-09-04 06:20:002015亚冠之德黑兰石油
日期:2015-08-05 18:46:082015年亚洲杯之巴勒斯坦
日期:2015-04-19 10:42:502015年亚洲杯之巴林
日期:2015-04-09 08:03:23
发表于 2014-04-10 16:47 |显示全部楼层
回复 1# freebug

直接先敲xd或rb不行(不带任何参数)?
   

论坛徽章:
5
CU大牛徽章
日期:2013-09-18 15:16:55CU大牛徽章
日期:2013-09-18 15:18:22CU大牛徽章
日期:2013-09-18 15:18:432015年辞旧岁徽章
日期:2015-03-03 16:54:152015年迎新春徽章
日期:2015-03-04 09:49:45
发表于 2014-04-10 22:04 |显示全部楼层
实在不行,还有MP Reset

论坛徽章:
0
发表于 2014-04-15 10:03 |显示全部楼层
直接运行就是输出help啊,MP Reset是MP卡上的reset键么?

论坛徽章:
2
技术图书徽章
日期:2013-11-15 00:23:25双鱼座
日期:2013-11-25 13:13:29
发表于 2014-04-15 10:29 |显示全部楼层
回复 4# freebug


    6600好像没有Reset键吧

论坛徽章:
0
发表于 2014-04-15 16:21 |显示全部楼层
iLO 2 MP Reset Button
The iLO 2 MP reset button enables you to reset the iLO 2 MP, and optionally reset the user-specific
values to factory default values. To soft reset the iLO 2 MP, press the button momentarily, then
release it. To soft reset the iLO 2 MP and return user-specific values to factory default values,
press the button for more than four seconds, then release it. The following values are reset to
factory default values:
• Serial terminal baud rate settings
• User names and passwords
rx6600 MP.JPG

评分

参与人数 1可用积分 +5 收起 理由
lbseraph + 5 谢谢积极回复~

查看全部评分

论坛徽章:
48
15-16赛季CBA联赛之青岛
日期:2021-01-07 13:41:2315-16赛季CBA联赛之上海
日期:2020-12-01 18:02:0720周年集字徽章-20	
日期:2020-10-28 14:14:2620周年集字徽章-20	
日期:2020-10-28 14:04:3015-16赛季CBA联赛之天津
日期:2020-10-18 22:51:412016猴年福章徽章
日期:2016-02-18 15:30:3415-16赛季CBA联赛之北控
日期:2015-12-22 13:30:48操作系统版块每日发帖之星
日期:2015-12-07 06:20:00操作系统版块每日发帖之星
日期:2015-09-04 06:20:002015亚冠之德黑兰石油
日期:2015-08-05 18:46:082015年亚洲杯之巴勒斯坦
日期:2015-04-19 10:42:502015年亚洲杯之巴林
日期:2015-04-09 08:03:23
发表于 2014-04-16 19:09 |显示全部楼层
回复 4# freebug

不应该吧?你是不是已经在Help菜单里面了?你是在MP:CM> 命令提示符下输入的么?
   

论坛徽章:
0
发表于 2014-05-10 19:17 |显示全部楼层
回复 7# lbseraph


    多谢大侠,本人实在太傻B了。。。。没注意看提示符是MP:HE。。而不是MP:CM

论坛徽章:
48
15-16赛季CBA联赛之青岛
日期:2021-01-07 13:41:2315-16赛季CBA联赛之上海
日期:2020-12-01 18:02:0720周年集字徽章-20	
日期:2020-10-28 14:14:2620周年集字徽章-20	
日期:2020-10-28 14:04:3015-16赛季CBA联赛之天津
日期:2020-10-18 22:51:412016猴年福章徽章
日期:2016-02-18 15:30:3415-16赛季CBA联赛之北控
日期:2015-12-22 13:30:48操作系统版块每日发帖之星
日期:2015-12-07 06:20:00操作系统版块每日发帖之星
日期:2015-09-04 06:20:002015亚冠之德黑兰石油
日期:2015-08-05 18:46:082015年亚洲杯之巴勒斯坦
日期:2015-04-19 10:42:502015年亚洲杯之巴林
日期:2015-04-09 08:03:23
发表于 2014-05-11 15:46 |显示全部楼层
回复 8# freebug

解决问题就好~:wink:
   
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP