- 论坛徽章:
- 0
|
Error: Package: glibc-2.12-1.107.el6.i686 (base)
Requires: glibc-common = 2.12-1.107.el6
Installed: glibc-common-2.12-1.166.el6_7.3.x86_64 (installed)
glibc-common = 2.12-1.166.el6_7.3
Available: c-2.12-1.107.el6.x86_64 (base)
glibc-common = 2.12-1.107.el6
Available: glibc-common-2.12-1.149.el6_6.5.x86_64 (base)
glibc-common = 2.12-1.149.el6_6.5
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
更换了一个源 变成了
Error: Multilib version problems found. This often means that the root
cause is something else and multilib version checking is just
pointing out that there is a problem. Eg.:
1. You have an upgrade for cyrus-sasl-lib which is missing some
dependency that another package requires. Yum is trying to
solve this by installing an older version of cyrus-sasl-lib of the
different architecture. If you exclude the bad architecture
yum will tell you what the root cause is (which package
requires what). You can try redoing the upgrade with
--exclude cyrus-sasl-lib.otherarch ... this should give you an error
message showing the root cause of the problem.
2. You have multiple architectures of cyrus-sasl-lib installed, but
yum can only see an upgrade for one of those arcitectures.
If you don't want/need both architectures anymore then you
can remove the one with the missing update and everything
will work.
3. You have duplicate versions of cyrus-sasl-lib installed already.
You can use "yum check" to get yum show these errors.
...you can also use --setopt=protected_multilib=false to remove
this checking, however this is almost never the correct thing to
do as something else is very likely to go wrong (often causing
much more problems).
求大神解答 在线等 急 |
|
免费注册
发表于 2016-08-05 14:22
发表于 2016-08-05 22:46