严重非致命错误，smpboot: CPU1: Not responding

action08

1. [    0.000000] AGP: Checking aperture...
   
2. [    0.000000] AGP: No AGP bridge found
   
3. [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
   
4. [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
   
5. [    0.000000] Memory: 3632616K/3779484K available (5244K kernel code, 948K rwdata, 1832K rodata, 1208K init, 840K bss, 146868K reserved)
   
6. [    0.000000] Hierarchical RCU implementation.
   
7. [    0.000000]         RCU dyntick-idle grace-period acceleration is enabled.
   
8. [    0.000000]         RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
   
9. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
   
10. [    0.000000] NR_IRQS:33024 nr_irqs:712 16
    
11. [    0.000000] spurious 8259A interrupt: IRQ7.
    
12. [    0.000000] Console: colour VGA+ 80x25
    
13. [    0.000000] console [tty0] enabled
    
14. [    0.000000] hpet clockevent registered
    
15. [    0.000000] tsc: Fast TSC calibration failed
    
16. [    0.000000] tsc: Unable to calibrate against PIT
    
17. [    0.000000] tsc: using HPET reference calibration
    
18. [    0.000000] tsc: Detected 1296.713 MHz processor
    
19. [    0.000064] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.42 BogoMIPS (lpj=5186852)
    
20. [    0.000071] pid_max: default: 32768 minimum: 301
    
21. [    0.000098] ACPI: Core revision 20140424
    
22. [    0.022353] ACPI: All ACPI Tables successfully acquired
    
23. [    0.022455] Security Framework initialized
    
24. [    0.022477] AppArmor: AppArmor disabled by boot time parameter
    
25. [    0.022481] Yama: disabled by default; enable with sysctl kernel.yama.*
    
26. [    0.023130] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    
27. [    0.026362] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    
28. [    0.027694] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    
29. [    0.027716] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    
30. [    0.028319] Initializing cgroup subsys memory
    
31. [    0.028340] Initializing cgroup subsys devices
    
32. [    0.028362] Initializing cgroup subsys freezer
    
33. [    0.028371] Initializing cgroup subsys net_cls
    
34. [    0.028384] Initializing cgroup subsys blkio
    
35. [    0.028395] Initializing cgroup subsys perf_event
    
36. [    0.028402] Initializing cgroup subsys net_prio
    
37. [    0.028464] tseg: 00dff00000
    
38. [    0.028471] CPU: Physical Processor ID: 0
    
39. [    0.028474] CPU: Processor Core ID: 0
    
40. [    0.028479] mce: CPU supports 6 MCE banks
    
41. [    0.028539] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    
42. Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
    
43. tlb_flushall_shift: 6
    
44. [    0.028756] Freeing SMP alternatives memory: 20K (ffffffff81a1d000 - ffffffff81a22000)
    
45. [    0.033367] ftrace: allocating 21702 entries in 85 pages
    
46. [    0.055320] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    
47. [    0.095037] smpboot: CPU0: AMD E-300 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
    
48. [    0.200628] Performance Events: AMD PMU driver.
    
49. [    0.200639] ... version:                0
    
50. [    0.200642] ... bit width:              48
    
51. [    0.200646] ... generic registers:      4
    
52. [    0.200649] ... value mask:             0000ffffffffffff
    
53. [    0.200652] ... max period:             00007fffffffffff
    
54. [    0.200655] ... fixed-purpose events:   0
    
55. [    0.200658] ... event mask:             000000000000000f
    
56. [    0.204762] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    
57. [    0.205071] x86: Booting SMP configuration:
    
58. [    0.205077] .... node  #0, CPUs:      #1
    
59. <b><font color="Red">[    5.222361] smpboot: CPU1: Not responding
    
60. [    5.222417] smpboot: do_boot_cpu failed(1) to wakeup CPU#1
    
61. [    5.222496] x86: Booted up 1 node, 1 CPUs</font></b>
    
62. [    5.222501] smpboot: Total of 1 processors activated (2593.42 BogoMIPS)
    
63. [    5.223127] devtmpfs: initialized
    
64. [    5.232093] PM: Registering ACPI NVS region [mem 0xdfbbf000-0xdfebefff] (3145728 bytes)
    
65. [    5.232462] futex hash table entries: 1024 (order: 4, 65536 bytes)
    
66. [    5.235073] pinctrl core: initialized pinctrl subsystem
    
67. [    5.235286] NET: Registered protocol family 16
    
68. [    5.235623] cpuidle: using governor ladder
    
69. [    5.235631] cpuidle: using governor menu
    
70. [    5.235843] ACPI: bus type PCI registered
    
71. [    5.235849] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    
72. [    5.236063] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    
73. [    5.236070] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    
74. [    5.236401] PCI: Using configuration type 1 for base access
    
75. [    5.239304] ACPI: Added _OSI(Module Device)
    
76. [    5.239313] ACPI: Added _OSI(Processor Device)
    
77. [    5.239318] ACPI: Added _OSI(3.0 _SCP Extensions)
    
78. [    5.239322] ACPI: Added _OSI(Processor Aggregator Device)
    
79. [    5.245215] ACPI: Executed 1 blocks of module-level executable AML code
    
80. [    5.251970] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    
81. [    5.266896] ACPI: Interpreter enabled
    
82. [    5.266925] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    
83. [    5.266936] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    
84. [    5.266976] ACPI: (supports S0 S3 S4 S5)
    
85. [    5.266982] ACPI: Using IOAPIC for interrupt routing
    
86. [    5.267358] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    
87. [    5.335797] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    
88. [    5.335815] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    
89. [    5.335884] \_SB_.PCI0:_OSC request failed
    
90. [    5.335888] _OSC request data:1 1f 0
    
91. [    5.335900] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    
92. [    5.336230] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
    
93. [    5.336244] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    
94. [    5.336730] PCI host bridge to bus 0000:00
    
95. [    5.336739] pci_bus 0000:00: root bus resource [bus 00-ff]

复制代码

系统最近没有升级维护什么的，最近经常出现该错误，重启一下又正常，不清楚什么情况。
有没有大牛指点一下啊，网上也狗不到什么资料

action08

win下一直正常，双核cpu，
就是linux才有，比如centos6/debian/ubuntu都出现过该提示，然后就是单核，机器看视频稍微卡点

q1208c

回复 1# action08

有一个CPU初始化失败.