K_trap unexpected Alignment fault in system mode

qqjsj

系统提示：K_trap unexpected Alignment fault in system mode。

CNL

1、Check SCO's Hardware Compatibility Page to make sure you are using supported hardware:
             http://www.sco.com/chwp

2、Make sure you have installed all required supplements, including those for SMP, if you have a multiprocessor system. A list of minimum required supplements is located at:
             http://www.sco.com/kb/toolbox/patch.html

3、If a DPT Raid controller is configured in the system, be sure you have installed the latest firmware update and latest driver for your controller that are available from DPT, to insure optimum sharing of resources with your Digi board.

4、If you have a Digi multiport board in the system, then the Digi driver may not be correct for that system.
There is a new driver distributed by Digi for use on SCO OpenServer systems. It is available for download from:
             http://www.digi.com
You may contact Digi Technical Support for more information.

详细见
http://wdb1.sco.com/kb/showta?taid=110374&sid=

jaue

是什么原因造成的？英文水平不好，麻烦给翻译一下。这个问题怎么解决啊？

saintdragon

1。检查SCO的硬件兼容列表
2。确认安装了所有需要的补丁，包括对SMP（多cpu）的补丁
3。如果安装了DPT RAID会，确认该RAID卡的固件和驱动是最新的
4。如果系统有DIGI多端口板卡，则可能是该板卡的驱动不正确。请更新该板卡的驱动。
楼主不要太懒，其实很简单，安装一个金山词霸，多花点时间，自己学习一下

uking1979

请问一开机就这样提示，怎么解决，装了多用户卡，开机时移动一下死机就这重启样提示了

uking1979

急！！！！！！！！！！！！！！！

saintdragon

SCO提供的解决方法试过了吗？
例如更新多用户卡的驱动程序