- 论坛徽章:
- 2
|
请问sun v280R服务器装好系统后怎么挂接3310阵列?
http://www.sun.com/products-n-solutions/hardware/docs/Network_Storage_Solutions/Workgroup/3310/index.html
这里有3310的中文文档,希望对你有所帮助!
1. The minimum operating system is Solaris 8 with the Recommended Patch Cluster.
2. The necessary driver for this HBA is not included in Solaris 8 or Solaris 9, it must be downloaded.
3. The Patch ID is 112697-xx for Solaris 8 and 112706 -xx for Solaris 9
To Download and Install the Driver Packages
1. Log into the host to be connected to the array.
2. Go to www.sun.com/software/download/index.html
3. Click on the A-Z index tab and then select S.
4. Find Sun StorEdge [TM] PCI Dual Ultra3 SCSI Host Adapter v1.0 in that list towards the bottom, and click the link.
5. If you have not already registered, click the Register button, complete the registration form, and click the second Register button when done.
6. Enter your Personal ID and Password, and click the Log In button.
7. On the Legal/License Agreement page, read the License Agreement and click Accept and Continue when done
8. Find the table of files to download for the version of the Solaris operating environment on which you are installing the driver. On the Sun StorEdge[TM] PCI Dual Ultra3 SCSI Host Adapter 1.0 page, find the packages listed under the column heads for one of the following operating environments: Solaris[TM] 8/SPARC Platform or Solaris[TM] 9/SPARC Platform
9. Download the required packages, choosing between 32 bit and 64 bit according to your configuration, and download the README file. For 32-bit configuration download the following two files:
SUNWqus.tar.Z
SUNWqusu.tar.Z
For a 64-bit configuration download the following four files (32 plus 64 bit drivers must be installed) :
SUNWqus.tar.Z
SUNWqusu.tar.Z
SUNWqusx.tar.Z
SUNWqusux.tar.Z
For the README, download the following file:
PCI_HBA_ReadMe.txt
a. Double-click on the link to the desired file.
b. In the Save As dialog box, enter a destination directory for the file, and click the OK button. |
|