IRQ冲突

wangyi6854

先说说机器的配置：
celeron 366
MS - 6163  BIOS ver. 2.7
Matrox G400
Diammond S90
Matxor 91020U3     接在IDE1  Primary
Matxor 90648D3     接在IDE2  Primary
256 + 128M
Reltek 8139D

启动时S90分配的IRQ和G400的一样，都是11。在BIOS里把PNP OS INSTALLED 设为NO, RESOUSE ALLOCATE BY MANUAL RESET CONFIGURE 设为YES后充起，试了几次都不行。把S90 和网卡换几个槽子插，试了好些次都不行。有时候S90和网卡分到5。或是分到其他的。

但是不管怎么样，Windows server 2003都没有问题。用得好好的。但是Freebsd就不行。声卡没声音，加载驱动的时候说IO port已经被使用了。

原来好像可以分到不同的IRQ，现在不知道怎么了。怎么弄都不行。

大家帮帮忙，看看是怎么回事？

谢谢！

wangyi6854

dmesg:



Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Thu May 26 16:01:40 CST 2005
    root@FreeBSD:/usr/src/sys/i386/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (367.50-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>;
real memory  = 402587648 (383 MB)
avail memory = 388464640 (370 MB)
npx0: <math processor>; on motherboard
npx0: INT 16 interface
acpi0: <MSISYS MS-6163W>; on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz>; port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)>; on acpi0
acpi_throttle0: <ACPI CPU Throttling>; on cpu0
acpi_button0: <ower Button>; on acpi0
pcib0: <ACPI Host-PCI bridge>; port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus>; on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge>; mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <CI-PCI bridge>; at device 1.0 on pci0
pci1: <CI bus>; on pcib1
drm0: <Matrox G400/G450 (AGP)>; mem 0xe5000000-0xe57fffff,0xe4000000-0xe4003fff,0xe8000000-0xe9ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
isab0: <CI-ISA bridge>; at device 7.0 on pci0
isa0: <ISA bus>; on isab0
atapci0: <Intel PIIX4 UDMA33 controller>; port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller>; port 0xe000-0xe01f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller>; on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge>; at device 7.3 (no driver attached)
pci0: <multimedia, audio>; at device 14.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX>; port 0xec00-0xecff mem 0xeb020000-0xeb0200ff irq 5 at device 20.0 on pci0
miibus0: <MII bus>; on rl0
rlphy0: <RealTek internal media interface>; on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:e0:4c:10:ff:f0
atkbdc0: <Keyboard controller (i8042)>; port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard>; irq 1 on atkbdc0
psm0: <S/2 Mouse>; irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM>; at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console>; at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>;
vga0: <Generic ISA VGA>; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 367501149 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 9736MB <Maxtor 91020U3/MA540RR0>; [19783/16/63] at ata0-master UDMA33
ad2: 6179MB <Maxtor 90648D3/GAS54112>; [12556/16/63] at ata1-master UDMA33
acd0: CDROM <IDE/ATAPI CD-ROM 40X/T0D2>; at ata1-slave PIO4
Mounting root from ufs:/dev/ad2s1a
pcm0: <Aureal Vortex 8820>; port 0xe800-0xe807,0xe400-0xe407 mem 0xeb000000-0xeb01ffff irq 11 at device 14.0 on pci0
pcm0: failed: rid 0x14 is ioport, requested 3
pcm0: failed: rid 0x18 is ioport, requested 3

rainren

drm0: <Matrox G400/G450 (AGP)>; mem 0xe5000000-0xe57fffff,0xe4000000-0xe4003fff,0xe8000000-0xe9ffffff irq 11 at device 0.0 on pci1

vga0: <Generic ISA VGA>; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

pcm0: <Aureal Vortex 8820>; port 0xe800-0xe807,0xe400-0xe407 mem 0xeb000000-0xeb01ffff irq 11 at device 14.0 on pci0

wangyi6854

谢谢！现在IRQ已经不冲突了，但是还是有这两句：

pcm0: failed: rid 0x14 is ioport, requested 3
pcm0: failed: rid 0x18 is ioport, requested 3

等一下我进Freebsd，把新的dmesg贴上来。
在Freebsd里还是没办法输中文，都照着一步步地做了。太麻烦了！

wangyi6854

New version of dmesg:


Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Thu May 26 16:01:40 CST 2005
    root@FreeBSD:/usr/src/sys/i386/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (367.50-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>;
real memory  = 402587648 (383 MB)
avail memory = 388464640 (370 MB)
npx0: <math processor>; on motherboard
npx0: INT 16 interface
acpi0: <MSISYS MS-6163W>; on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz>; port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)>; on acpi0
acpi_throttle0: <ACPI CPU Throttling>; on cpu0
acpi_button0: <ower Button>; on acpi0
pcib0: <ACPI Host-PCI bridge>; port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus>; on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge>; mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <CI-PCI bridge>; at device 1.0 on pci0
pci1: <CI bus>; on pcib1
drm0: <Matrox G400/G450 (AGP)>; mem 0xe5000000-0xe57fffff,0xe4000000-0xe4003fff,0xe8000000-0xe9ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
isab0: <CI-ISA bridge>; at device 7.0 on pci0
isa0: <ISA bus>; on isab0
atapci0: <Intel PIIX4 UDMA33 controller>; port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller>; port 0xe000-0xe01f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller>; on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge>; at device 7.3 (no driver attached)
pci0: <multimedia, audio>; at device 18.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX>; port 0xec00-0xecff mem 0xeb020000-0xeb0200ff irq 7 at device 20.0 on pci0
miibus0: <MII bus>; on rl0
rlphy0: <RealTek internal media interface>; on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:e0:4c:10:ff:f0
atkbdc0: <Keyboard controller (i8042)>; port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard>; irq 1 on atkbdc0
psm0: <S/2 Mouse>; irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM>; at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console>; at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>;
vga0: <Generic ISA VGA>; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 367502441 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 9736MB <Maxtor 91020U3/MA540RR0>; [19783/16/63] at ata0-master UDMA33
ad2: 6179MB <Maxtor 90648D3/GAS54112>; [12556/16/63] at ata1-master UDMA33
acd0: CDROM <IDE/ATAPI CD-ROM 40X/T0D2>; at ata1-slave PIO4
Mounting root from ufs:/dev/ad2s1a
pcm0: <Aureal Vortex 8820>; port 0xe800-0xe807,0xe400-0xe407 mem 0xeb000000-0xeb01ffff irq 5 at device 18.0 on pci0
pcm0: failed: rid 0x14 is ioport, requested 3
pcm0: failed: rid 0x18 is ioport, requested 3