ES40不支持古老的14''CRT显示器吗？显卡如何设置？

Lunew

To set the resolution, vertical sync, and or color depth,use the following  steps:

  1: Check for the file SYS$MANAGERECW$PRIVATE_SERVER_SETUP.COM.
       If the file exists, skip to step 2.
       If the file does not exist, then copy:
         SYS$MANAGERECW$PRIVATE_SERVER_SETUP.TEMPLATE
         to SYS$MANAGERECW$PRIVATE_SERVER_SETUP.COM
    2: Edit SYS$MANAGERECW$PRIVATE_SERVER_SETUP.COM to add the following lines in the Cluster Common or Standalone Workstation Setup area of   the file (along with the other setup options):
       This example sets Resolution to 1280x1024, Vertical Sync to 75Hz,and a Color Depth of  24.

         $! Set the Resolution X and Y Size in Pixels:
         $ decw$xsize_in_pixels == 1280
         $ decw$ysize_in_pixels == 1024
         $! Set the Server Visual Depth:
         $ define/exec/system/nolog decw$server_pixel_depth  24
         $! Set the Vertical Sync Rate (vsync):
         $ define/exec/system/nolog decw$server_refresh_rate 75
    3: Save the file, and invoke the OpenVMS shutdown and reboot process, or restart the DECwindows X Server (the DECW$SERVER_0 process) via: $ @SYS$STARTUPECW$STARTUP RESTART

  “北京阿不”试试吧，应该没有问题的。

北京阿不

谢谢chfhy，谢谢吹拂的晨风！看来就是操作系统的问题。我不瞎折腾了，现在闹了个17的显示器先用着，以后有空再弄吧。若有什么经验，一定贴到咱的论坛里面来！     

北京阿不

谢谢谢谢lunew！！！写得特别清楚明白！
真的设好啦！我设置成为800×600，60HZ，那个古老的显示器就支持图形啦，真好！严重感谢！     
申请斑竹把lunwe的这个帖子加为精华哦！