免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12
最近访问板块 发新帖
楼主: cht11cht
打印 上一主题 下一主题

san环境下配置磁带库(原创) [复制链接]

论坛徽章:
0
11 [报告]
发表于 2005-10-10 17:26 |只看该作者

san环境下配置磁带库(原创)

虽然对带库不是很熟,但是感觉就这么简单几步不太可能配好,疑惑ing???

论坛徽章:
0
12 [报告]
发表于 2005-10-10 18:38 |只看该作者

san环境下配置磁带库(原创)

把带库连好以后,还要确定你的驱动器.同时,还要看你的备份软件的.

论坛徽章:
0
13 [报告]
发表于 2006-01-12 20:03 |只看该作者

不错

好文,顶!

论坛徽章:
0
14 [报告]
发表于 2006-01-12 23:44 |只看该作者
too naive, too simple

论坛徽章:
0
15 [报告]
发表于 2006-01-13 01:10 |只看该作者
If you install QLogic HBA software SANsurfer in the driver package, run /opt/QLogic_Corporation/SANsurfer/SANsurfer to get the target and lun information.

论坛徽章:
0
16 [报告]
发表于 2006-01-13 01:16 |只看该作者
I believe it works with Sun branded QLogic HBA (SG-XPCI2FC-QF2 or SG-XPCI1FC-QF2 running qlc HBA driver) only to run cfgadm command to get the target and lun information.

论坛徽章:
0
17 [报告]
发表于 2006-01-13 04:52 |只看该作者
原帖由 sun_up 于 2006-1-13 01:16 发表
I believe it works with Sun branded QLogic HBA (SG-XPCI2FC-QF2 or SG-XPCI1FC-QF2 running qlc HBA driver) only to run cfgadm command to get the target and lun information.


Running qlc driver on Sun branded Qlogic HBA is at your own risk.

Sun's firmware is different from Qlogic's.
The firmware must be replaced before Qlogic's driver installation.

论坛徽章:
0
18 [报告]
发表于 2010-11-12 14:01 |只看该作者
备份软件不同,配法不一样啊

论坛徽章:
0
19 [报告]
发表于 2010-12-03 18:23 |只看该作者
怎么确定LUN号?请楼主给个明示
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP