- 论坛徽章:
- 0
|
OpenServer 5.07在用U盘的时候mount不上？
已解决。
在出fdisk菜单后先用6删掉原分区，在用7建立分区，后在WIN98下格式化。就可以用了。不能用XP格，要不还是MOUNT 不上。
Press <Return>; to continue
1. Display Partition Table
2. Use Entire Disk for UNIX
3. Use Rest of Disk for UNIX
4. Create UNIX Partition
5. Activate Partition
6. Delete Partition
7. Create Partition
Enter your choice or 'q' to quit: 7
Current Hard Disk Drive: /dev/rdsk/1s0
+-------------+----------+-----------+---------+---------+---------+
| Partition | Status | Type | Start | End | Size |
+-------------+----------+-----------+---------+---------+---------+
+-------------+----------+-----------+---------+---------+---------+
Total disk size: 4032 tracks (3 reserved for masterboot and diagnostics)
Enter partition number or 'q' to return: 4
Enter starting track number, or 'q' to return: 1
Enter partition size in tracks, or 'q' to return: 4000 （32M为2000，64M为4000）
Select operating system type
1. UNIX
2. XENIX
3. DOS (12)
4. DOS (16)
5. DOS (32)
6. DOS (ext)
7. OS2
8. CCPM
9. WIN (32)
10. WIN (32)
Enter your choice or 'q' to return: 5
Current Hard Disk Drive: /dev/rdsk/1s0
+-------------+----------+-----------+---------+---------+---------+
| Partition | Status | Type | Start | End | Size |
+-------------+----------+-----------+---------+---------+---------+
| 4 | Inactive | DOS (32) | 1 | 4000 | 4000 |
+-------------+----------+-----------+---------+---------+---------+
Total disk size: 4032 tracks (3 reserved for masterboot and diagnostics)
Press <Return>; to continue
1. Display Partition Table
2. Use Entire Disk for UNIX
3. Use Rest of Disk for UNIX
4. Create UNIX Partition
5. Activate Partition
6. Delete Partition
7. Create Partition
Enter your choice or 'q' to quit: q
WARNING: There is no ACTIVE UNIX partition.
Do you wish to specify an active UNIX partition? (y/n) n
/etc/badtrk: cannot open /dev/rdsk/1sa for ioctl
Hard disk initialization procedure completed.
# |
|
免费注册
发表于 2003-04-30 17:33
