如何调低2.6下的鼠标灵敏度?

yasker

或者怎么给grub启动的内核加参数?

升级到2.6.12以后,鼠标速度n快,把KDE里面全调到底都难以忍受.......
在kerneltrap上看到, 可以给"kernel boot line"加参的方法:psmouse_rate=60 psmouse_resolution=200搞定, 但是我在grub.conf改了,但是没有用:

kernel /vmlinuz-2.6.12 ro root=LABEL=/ hdc=ide-scsi psmouse_rate=60 psmouse_resolution=200

不知道怎么可以搞定......

inhell

我的鼠标灵敏度是2。4  ^_^

yasker

自己搞定了,是2.6和2.4内核识别的不同
去掉XF86config里面的一个鼠标驱动就可以了,否则就会出现两倍效果.....汗.....
见Vojtech Pavlik的<Linux 2.6 Input Drivers FAQ>;,原文在kerneltrap上

Problems:

~~~~~~~~~
I'm getting double clicks when I click only once.
My scroll wheel scrolls by two lines/screens instead of one.
My mouse moves too fast.

Solution:

~~~~~~~~~
Check your XFree86 config file.

You probably have two "mouse" entries there, one pointing to /dev/psaux and the other to /dev/input/mice, so that you can get both your PS/2 and USB mouse working on 2.4.
2.6 uses the input subsystem for both PS2 and USB, and thus both devices will report events from both mice, resulting in doubled events.

Remove either the /dev/psaux or /dev/input/mice entry, depending what suits you better for 2.4 compatibility should you ever need go back to 2.4.