高手救我！！！！！如何制作sco unix 5.04启动软盘？(我在等你)

-boy-

我有一张sco unix 5.04的安装光盘，可是无法在images\boot\下找到image文件，只有n00和sum文件，怎样才能制作安装需要的启动盘？

xy-coordinate

是要软盘引导安装系统？

-boy-

是的，帮我一下，可以吗？

jjerry

应该在安装光盘里有个说明文件，里边有在windows下如何制作安装盘的方法，记得是很简单的。

jjerry

在ms-dos方式下输入一个命令，插入软盘即可。

-boy-

是有readme,原文如下，可是找不到命令dd（此法应在unix下才行),我现在想在windows下制作此盘
Creating Installation Boot Floppy Disk
Your SCO OpenServer product distribution probably included a floppy disk to boot from for product installation. If, somehow, that disk has been lost or damaged, there is an image of it on the CDROM that can be used to create a new boot floppy.


To create a floppy disk for installing SCO software, you can copy the media image to formatted floppy disk using the dd(C) command.


The boot image is in the /images/boot/ directory on this CD-ROM.

Assuming you have mounted the CDROM on /mnt and your 1.44MB floppy drive is the first drive on the controller:


To make an operating system boot floppy disk, enter this command:

dd if=/mnt/images/boot/N00 of=/dev/rfd0

The directory that contains the image file also contains a file with the checksum for each floppy disk. Use this to verify the checksum of the floppy disk that you make. For the operating system boot floppy disk, the output of the command

sum -r /dev/rfd0

should match the contents of the file /mnt/images/boot/sums.

-boy-

请各位帮帮我吧！谢了！！！！！！！

26510777

去ftp.sco.com应该有下载的启动文件，用rewritten写入就行了

-boy-

找不到！没有

26510777

如果一般的pc，光驱跳线到master应该可以直接用光盘安装了