PANIC:srmountfun -Error 22 mounting rootdev hd(1/42)

wckjbzyf

各位大哥师傅:
      我的机器在启动后出现如下信息, 请教怎么处理, 谢谢各位,请帮帮忙!
PANIC:srmountfun -Error 22 mounting rootdev hd(1/42)
Cannot dump 16271 pages to dumpdev hd(1/41):space for only 0   pages
   Dump not completed.
**safe to power off**
         --or--
**press Any key to Reboot**

sdccf

分区坏了吧,很难解决的.

LEMMONTREE

主要看你做什么之后出现这种错误

tshbona

scsi的硬盘LSIlogic Ultra320 SCSI 卡，新装系统，安装时用boot:link biosgeom=(1024,25,63)安装，说是可以识别大硬盘，安装了两遍，安装过程没有错误，很顺利，可是重新启动后就报以下的错误

PANIC:srmountfun -Error 22 mounting rootdev hd(1/42)
Cannot dump 262031 pages to dumpdev hd(1/41):space for only 0   pages
   Dump not completed.
**safe to power off**
         --or--
**press Any key to Reboot**
请斑竹给个好的建议

tshbona

先用boot:下输入unix.safe，没成功，故障依旧

hey guys.
i have a bmw program i copied to another hard drive(used acronis)for back-up. the program runs on linux. theres 2 bmw programs on the drive. one for diagnostics, one for programming bmw modules. when i boot up i get an error message stating the following:

PANIC: SRMOUNTFUN - error 22 mounting rootdev hd (1/42)
cannot dump 52407 pages to dumpdev hd (1/41) : space for only 0 pages

dump not completed

now to run the second program upon reboot i type "bootos 3" and the second program works.

the first program is supposed to be the default boot program but i get the error message above. the original drive works fine. i dont know a thing about linux but i'm guessing i'm mising a command i need when i copied it.
any help would be greatly appreciated. thanks, gery

sdccf

估计是驱动问题

tshbona

文档有一条是：使用容量为73G 及以上的硬盘时，请在“Boot:”后
输入link biosgeom=(1024,25,63)
于是我就照此安装，结果失败，后发现我的硬盘就是73G,起初认为sco会自动识别安装，不管是不是加了link其他字符串,但是并不是我所想象。困扰许久的问题就是因为biosgeom=(1024,25,63)，去掉后安装解决。忙活到10点多，google了许久。回头想想错误有些低级，惭愧。呵呵。

sdccf

解决问题就好，这个问题可以结贴了。

chinaboywg

info grub-- Troubleshooting--* Stage1.5 errors::Errors reported by the Stage 1.5
22 : No such partition
This error is returned if a partition is requested in the device
part of a device- or full file name which isn't on the selected
disk.

硬盘未做raid 1,导致盘符漂移
grub找不到启动分区
进入bios更改硬盘顺序启动成功.