ciscoworks安装问题

weixinc

ciscoworks安装出现
cannot create the install independcy file
怎么回事，请各位大侠帮助

my system:
windows2000,ie6,sun jvm 1.2

johnason

2000什么版本？java的版本和要求的是一样的么？

never1984

多半是java版本的问题，是英文版的么？

我爱臭豆腐

升级java另外使用e文的nt。

weixinc

谢谢各位，我研究了随机文档，好像只能在E文的NT4上安装，
只好重新试试

我爱臭豆腐

是找一个新版本吧。可以在2k下面安装。

我爱臭豆腐

CD One 5th Edition on Windows 2000 现在

我爱臭豆腐

Troubleshooting LMS Windows Installation

The following steps give guidelines with LMS Windows installation.

   1.

      Remove Win 2K SP3. At the time of release of CiscoWorks (CD-One 5th Ed), SP3 was in beta and was not tested.
   2.

      Do not add the computer to any NT/Windows domain (This is not a stringent requirement, but if you experience problems with CiscoWorks services not starting, remove the computer from the domain and determine if CiscoWorks functions.

我爱臭豆腐

Installation -- Windows

The steps below guide you through a CiscoWorks LMS Bundle Installation on Windows platforms.
Guidelines

General guidelines/cautions before starting:

   1.

      Install on NTFS partition. Do not install using FAT partitions.
   2.

      Check for pre-SP3 patches. Check in the Windows Control Panel's "Add/remove programs" applet to see if pre-SP3 Service Pack is applied.
   3.

      Do not install Windows 2000 Advanced Server; disable Terminal Services if they are present in the Control Panel Services applet. These are not supported.
   4.

      Do not install remotely using Terminal Services.
   5.

      Login as the local Administrator to install and administer. DO NOT LOGIN as a domain administrator.
   6.

      Do not install this under the root directory. Please create the subdirectory you wish to use and then install (e.g.) Do not attempt to install to C:\ or D:\.

      Note: If you do not have the original CD-ROM, but got the files from Cisco Systems Engineer OR a TAC engineer posted this on CCO, please ensure that the byte count matches the following:

      CiscoWorks Component   Windows   Solaris

      Cd-One 5th Ed   310,598,890 bytes   343,694,973 bytes

      RME 3.4   35,090,866 bytes   36,586,544 bytes

      Campus Manager   3.2 27,712,390 bytes   26,248,472 bytes

      DFM 1.2   23,631,891 bytes   49,622,719 bytes

      IPM   2.4 88,549,490 bytes   148,546,746 bytes

      ACL Manager   15,853,935 bytes   19,747,765 bytes

   7.

      Assign a static IP address for the CiscoWorks server
   8.

      DNS entry for CiscoWorks should be configured correctly with PTR reccord as well. To check this, run nslookup CiscoWorks_server_name and nslookup IP_address. Both outputs should be consistent.
   9.

      If you are performing an upgrade install, ensure the you apply the patch_1x_20.pl mentioned in the upgrade (local or remote) install procedure. This is critical... failing to apply this patch will necessitate complete removal of CiscoWorks and reinstallation (see CSCdy62657).
  10.

      Test each application before installing the next, this keeps uninstalls to a minimum. For instance, after installing CD-One, test that CiscoView can be used. After RME, add a device to the inventory. After Campus, perform a discovery.

never1984

记得所有的ciscoworks版本都要求英文的OS，英文的IE，英文的jdk，：）