急：如何把磁带上的文件拷贝到移动硬盘上

水云间55

如何把磁带上的文件拷贝到移动硬盘上？
1、磁带只能从工作站上读吗？
2、工作站如何与微机进行数据传输？
急，谢谢。在线等

wuqing

原帖由 水云间55 于 2006-2-27 15:01 发表
如何把磁带上的文件拷贝到移动硬盘上？
1、磁带只能从工作站上读吗？
2、工作站如何与微机进行数据传输？
急，谢谢。在线等

1、磁带机可以从远程机器上读写（有权限的话），知道远程备份吧
2、可以通过Samba或者FTP（在主机端开服务或者PC机上开服务都可以，看你哪个更熟悉）

wuqing

或者你也可以直接把移动硬盘作为一个设备挂到你的文件系统中，直接在你的工作站上从磁带拷贝到移动硬盘

详细请参考：System Administration Guide: Devices and File Systems
的 Chapter 2: Accessing Removable Media (Tasks)

水云间55

我刚学soalris。
是否可以这样做：
1、用tar cvf在工作站读磁带的数据。
2、在pc上用ftp保存数据？
3、如果pc和工作站没有进行网络连接呢？我该怎么办

谢谢

水云间55

麻烦你能写一下详细步骤吗？万分感谢

wuqing

还是建议你使用网络服务来达到该目的。
1、拷贝磁带机内容到主机上
2、ftp拷贝的内容到PC的FTP Server上


关于把移动硬盘直接挂在主机上我没有试过，其描述如下：

Using USB Mass Storage Devices
Starting in the Solaris 9 release, the following USB removable mass storage devices are
supported:
 CD-RWs
 Hards disks
 DVDs
 Digital cameras
 Diskette devices

Zip, Peerless, SmartMedia, CompactFlash, and ORB devices
For a complete list of USB devices that are supported in the Solaris OS, see:
http://www.sun.com/io_technologies/USB.html
All USB storage devices are accessed as removable media devices, which provides the
following advantages:

USB storage devices with standard MS-DOS or Windows (FAT) file systems are
supported.

You can use the user-friendly rmformat command instead of the format
command to format and partition all USB storage devices. If the functionality of
the format command is needed, use the format -e command.

You can use the fdisk command if you need to do fdisk-style partitioning.

Non-root users can now access USB storage devices, since the root-privileged
mount command is no longer needed. The device is automatically mounted by
vold and is available under the /rmdisk directory. If a new device is connected
while the system is down, do a reconfiguration boot with the boot -r command
so that vold recognizes the device. Note that vold does not automatically
recognize a hot-plugged device. If a new device is connected while the system is
up, restart vold. For more information, refer to the vold(1M) and
scsa2usb(7D) man pages.

These devices can be managed with or without volume management.
Disks with FAT file systems can be mounted and accessed. For example:

mount -F pcfs /dev/dsk/c2t0d0s0:c /mnt

All USB storage devices are now power managed, except for those that support
LOG SENSE pages. Devices with LOG SENSE pages are usually SCSI drives
connected through a USB-to-SCSI bridge device. In previous Solaris releases, some
USB storage devices were not power managed because they were not seen as
removable media.

Applications might work differently with USB mass storage devices. Keep the
following issues in mind when using applications with USB storage devices:

Applications might make incorrect assumptions about the size of the media
since only smaller devices like diskettes and Zip drives were removable
previously.

Requests by applications to eject media on devices where this would be
inapplicable, such as a hard drive, will succeed and do nothing.

If you prefer the behavior in previous Solaris releases where not all USB mass
storage were treated as removable media devices, then you can force the old
behavior by updating the /kernel/drv/scsa2usb.conf file.

128 System Administration Guide: Devices and File Systems ?January 2005
For more information on using USB mass storage devices, see scsa2usb(7D).