问题：sun的blade100和blade150的串口有区别吗？

zufuqing5303

如题，我安装一个应用软件的时候发现在blade150上一点问题没有
换到blade100上的时候就提示我串口无法通信，换了一台新的
blade100还是出现同样的问题，有谁知道blade100和blade150
有什么不同的吗？

metor78

应该是没有，他们的板子的编号都是一样的

bingfeng76

多少的系统，安装的是多少位的，两个机器没什么区别，同类型的。

zufuqing5303

呵呵，现在郁闷啊，把150的硬盘拆到blade100上了都不行，但把在blade100上装好Solaris8系统的盘放到blade150上再装应用就一点问题都没有，难道blade100上要打什么特殊的patch不成？

hb_xiaojun

blade 150是 blade100的后续版本，只是对OBP的内容，南桥的电池部分等小部分电路做了修改，就我的记忆，SIO （串口）部分应该未做改变

zufuqing5303

我现在把报错的信息贴出来，就是到第23步时发出错误信息的，是说建立不了ppp dail in,检测不到tty005
在同样的情况下在blade150上安装就一点问题都没有，真是奇怪，希望大家帮忙顶职一下：-）
#------------------------------------v--------------------------------------
# STEP 15: Setting permissions in /opt/apache/v1.2.5 to dr:linx


CMD=  /usr/bin/find /opt/apache/v1.2.5 -exec /usr/bin/chown dr:linx {} \;
CMD=  /usr/bin/find /opt/apache/v1.2.5 -exec /usr/bin/chmod a+r,u+rw {} \;
CMD=  /usr/bin/find /opt/apache/v1.2.5 -type d -exec /usr/bin/chmod a+rx,u+rwx {} \;
CMD=  /usr/bin/cat /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/ENV.env.bak | /bin/sed 's/^PRJ_TOPDIR.*/PRJ_TOPDIR=\${PRJ_TOPDIR:-\/opt\/linx_mp}/;s/^SYSTEM_TOPDIR.*/SYSTEM_TOPDIR=\${SYSTEM_TOPDIR:-\/linx_mp}/'> /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/ENV.env
CMD=  /usr/bin/rm -f /opt/linx_mp.DROC_COM_V1.6.0.0/devel/bin/sol/ct
CMD=  /usr/bin/rm -f /opt/linx_mp.DROC_COM_V1.6.0.0/services/logger/logserver/etc/log
CMD=  /usr/bin/chown -f -R dr:linx /opt/linx_mp.DROC_COM_V1.6.0.0
CMD=  /usr/bin/chmod -f -R ug+w    /opt/linx_mp.DROC_COM_V1.6.0.0
CMD=  /usr/bin/chmod -f g-w /opt/linx_mp.DROC_COM_V1.6.0.0/devel/launch/bin/perl/start_doit
CMD=  /usr/bin/chmod -f g-w /opt/linx_mp.DROC_COM_V1.6.0.0/devel/launch/bin/perl/doit
CMD=  /usr/bin/chmod -f u+s /opt/linx_mp.DROC_COM_V1.6.0.0/devel/launch/bin/perl/start_doit
CMD=  /usr/bin/rm -r -f /opt/linx_mp.DROC_COM_V1.6.0.0/devel/orb/config/Implementations/*.imp
#------------------------------------v--------------------------------------
# STEP 16: Setting up mplanding script


CMD=  /usr/bin/chmod 6775 /opt/linx_mp.DROC_COM_V1.6.0.0/tools/install/bin/sol/mplanding
CMD=  /usr/bin/chown root:sys /opt/linx_mp.DROC_COM_V1.6.0.0/tools/install/bin/sol/mplanding
#------------------------------------v--------------------------------------
# STEP 17: Setup droctools.adminCmd


CMD=  /usr/bin/chown root /opt/linx_mp/tools/adminCmd/bin/perl/adminExec
CMD=  /usr/bin/chmod u+s /opt/linx_mp/tools/adminCmd/bin/perl/adminExec
CMD=  /bin/ln -s /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/apps.env /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/APPS.env
CMD=  /bin/ln -s /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/tech.env /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/TECH.env
CMD=  /bin/ln -s /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/mgr.env /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/MGR.env
CMD=  /bin/ln -s /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/dr.env /opt/linx_mp.DROC_COM_V1.6.0.0/devel/env/sol/DR.env
#------------------------------------v--------------------------------------
# STEP 18: Setting up /images


CMD=  /usr/bin/rm -f /images/*rm: /images/jss_printjobs is a directory
rm: /images/jss_storejobs is a directory
rm: /images/lost+found is a directory
rm: /images/sources is a directory

CMD=  /usr/bin/mkdir -p /images/sources
CMD=  /usr/bin/chown dr:linx /images /images/sources
CMD=  /usr/bin/chmod 755 /images
CMD=  /usr/bin/chmod ug+w /images/sources
CMD=  /usr/bin/rm -r -f /images/jss_printjobs/*
CMD=  /usr/bin/chown dr:linx /images/jss_printjobs
CMD=  /usr/bin/rm -r -f /images/jss_storejobs/*
CMD=  /usr/bin/chown dr:linx /images/jss_storejobs
#------------------------------------v--------------------------------------
# STEP 19: Installing UPS software from /opt/linx_mp/services/ups/etc/mopups to run on /dev/ttya003


CMD=   /opt/linx_mp/services/ups/etc/mopups/upsinstall.pl -force UPS monitoring software uninstalled
UPS monitoring software installed

#------------------------------------v--------------------------------------
# STEP 20: Setting up ttya and ttyb


CMD=  /usr/sbin/pmadm -r -p zsmon -s ttya 2> /dev/null
CMD=  /usr/bin/chmod 666 /dev/ttya
CMD=  /usr/sbin/pmadm -r -p zsmon -s ttyb 2> /dev/null
CMD=  /usr/bin/chmod 666 /dev/ttyb
#------------------------------------v--------------------------------------
# STEP 21: Setting up sitty link


CMD=  ln -s /opt/SUNWconn/bin/sitty /usr/bin/sitty
#------------------------------------v--------------------------------------
# STEP 22: Setting up ttsession


#------------------------------------v--------------------------------------
# STEP 23: Setting up PPP Dialin support

Warning: PPP modem port /dev/ttya005 does not exist on this machine.

CMD=  /usr/sbin/pmadm -r -p zsmon -s ttya005 2> /dev/nullerror -- device "/dev/term/a005" does not exist

CMD=  /usr/sbin/pmadm -a -p zsmon -f u -s ttya005 -i root -m "" -v 1 -y "PPP Dial-in Modem"Usage:       /usr/sbin/pmadm -a [ -p pmtag | -t type ] -s svctag -i id -m "pmspecific"
                -v version [ -f xu ] [ -y comment ] [ -z script]
        /usr/sbin/pmadm -r -p pmtag -s svctag
        /usr/sbin/pmadm -e -p pmtag -s svctag
        /usr/sbin/pmadm -d -p pmtag -s svctag
        /usr/sbin/pmadm -l [ -p pmtag | -t type ] [ -s svctag ]
        /usr/sbin/pmadm -L [ -p pmtag | -t type ] [ -s svctag ]
        /usr/sbin/pmadm -g -p pmtag -s svctag [ -z script ]
        /usr/sbin/pmadm -g -s svctag -t type -z script

Error status (hi:1 lo:0) on qx(/usr/sbin/pmadm -a -p zsmon -f u -s ttya005 -i root -m "" -v 1 -y "PPP Dial-in Modem")

=============================
CommandOutput:

=============================
Died at ./mpinstall2.pl line 501.
### mpinstall2 complete
see /tmp/install_2_03-11-06_21:06:20.log for more information

zufuqing5303

再顶置一下，实在不行就用blade150算了，但总是想知道是什么原因才成a

zufuqing5303

看来问题还是挺严重的,有知道的吗?帮忙分析一下