- 论坛徽章:
- 0
|
- Copyright (c) 1992-2005 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
- root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
- ACPI APIC Table: <DELL PE1400 >
- Timecounter "i8254" frequency 1193182 Hz quality 0
- CPU: Intel Pentium III (860.89-MHz 686-class CPU)
- Origin = "GenuineIntel" Id = 0x686 Stepping = 6
- Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
- real memory = 536862720 (511 MB)
- avail memory = 515694592 (491 MB)
- ioapic0: Changing APIC ID to 1
- ioapic1: Changing APIC ID to 2
- MADT: Forcing active-low polarity and level trigger for SCI
- ioapic0 <Version 1.1> irqs 0-15 on motherboard
- ioapic1 <Version 1.1> irqs 16-31 on motherboard
- npx0: <math processor> on motherboard
- npx0: INT 16 interface
- acpi0: <DELL PE1400> on motherboard
- acpi0: Power Button (fixed)
- Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- cpu0: <ACPI CPU> on acpi0
- pcib0: <ACPI Host-PCI bridge> on acpi0
- pci0: <ACPI PCI bus> on pcib0
- fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe102000-0xfe102fff irq 16 at device 2.0 on pci0
- miibus0: <MII bus> on fxp0
- inphy0: <i82555 10/100 media interface> on miibus0
- inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- fxp0: Ethernet address: 00:b0:d0:d0:f5:d9
- xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfe103000-0xfe10307f irq 28 at device 6.0 on pci0
- miibus1: <MII bus> on xl0
- xlphy0: <3Com internal media interface> on miibus1
- xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- xl0: Ethernet address: 00:50:04:1d:af:d0
- pci0: <display, VGA> at device 14.0 (no driver attached)
- isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
- ata0: channel #0 on atapci0
- ata1: channel #1 on atapci0
- ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 5 at device 15.2 on pci0
- usb0: OHCI version 1.0, legacy support
- usb0: <OHCI (generic) USB controller> on ohci0
- usb0: USB revision 1.0
- uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub0: 2 ports with 2 removable, self powered
- pcib1: <ACPI Host-PCI bridge> on acpi0
- pci1: <ACPI PCI bus> on pcib1
- ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem 0xf9001000-0xf9001fff irq 30 at device 2.0 on pci1
- aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
- ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xf9000000-0xf9000fff irq 31 at device 2.1 on pci1
- aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
- fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
- atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- sio0: type 16550A
- sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
- sio1: type 16550A
- ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
- ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
- ppc0: FIFO with 16/16/8 bytes threshold
- ppbus0: <Parallel port bus> on ppc0
- plip0: <PLIP network interface> on ppbus0
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- orm0: <ISA Option ROMs> at iomem 0xc8000-0xcdfff,0xc0000-0xc7fff on isa0
- pmtimer0 on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- Timecounter "TSC" frequency 860885801 Hz quality 800
- Timecounters tick every 10.000 msec
- acd0: CDROM <ATAPI-CD ROM-DRIVE-52MAX/Ver 52B4> at ata0-master PIO4
- Waiting 15 seconds for SCSI devices to settle
- da0 at ahc1 bus 0 target 0 lun 0
- da0: <IBM-ESXS ST336607LW FN B25H> Fixed Direct Access SCSI-3 device
- da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
- da0: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
- da1 at ahc1 bus 0 target 1 lun 0
- da1: <SEAGATE ST336607LW 0007> Fixed Direct Access SCSI-3 device
- da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
- da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
- da2 at ahc1 bus 0 target 2 lun 0
- da2: <IBM-ESXS ST336607LW FN B25J> Fixed Direct Access SCSI-3 device
- da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
- da2: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
- Mounting root from ufs:/dev/da0s1a
复制代码 |
|