2100服务器报错，求助

芭蕉扇

再问一个：
2100服务器
启动自检的时候面板上显示：  FAIL I/O_00 0004
请问是什么故障？？

swallowcn

好老的机器呀?

2100都还在用,看来上边的应用比较重要吧!

还不如把它升级成AS1200或DS20或ES40多爽!

david9000

芭蕉扇 ，你那里的机器怎么总是出问题？？
是不是很久没有维护了

Garysun30

The fail-safe loader (FSL) is redundant or backup console that allows you to update or restore the SRM console if it is corrupted. The AlphaServer 2000, 2100 and 2100A systems utilize a ROM on either the standard I/O, motherboard or backplane module, depending on system type, to store the failsafe loader console.
As long as the fail-safe loader is intact you will get to an ash>  prompt on the console and an OCP display of  FAIL I/O_00 0004 when the FSL has been activated..  I have also seen FAIL I/O_00 04 and FAIL I/O_04  documented. The FSL is activated under the following circumstances: .

SRM console firmware is corrupted during  upgrade (power failure, load failed)
Error in the nonvolatile nvram file
Hardware failure during power-up prevents the console firmware from loading.
A configuration error, such as an incorrect environment variable setting.
Driver error (console driver)
FSL enable switch is activated

芭蕉扇

原帖由 david9000 于 2006-3-29 14:49 发表
芭蕉扇 ，你那里的机器怎么总是出问题？？
是不是很久没有维护了

是备机，我做测试太多了，给搞坏了

david9000

原帖由 芭蕉扇 于 2006-3-31 10:40 发表


是备机，我做测试太多了，给搞坏了

那还好，不至于影响应用，呵呵。

hero_cai

FAIL module_type

If an error is detected in the CPU, memory, or I/O, a failure
message is displayed and the Halt button LED lights for a few
seconds. The error is logged to the appropriate module via
the serial control bus. In nearly all cases, the power-up tests
continue.
The module_type and slot number for the module that failed,
along with the test number that detected the error are also
displayed.
Module types and/or slot numbers:
CPU_nn — CPU module (0–3)
MEM_nn — Memory module (0–3)
I/O_0 — Standard I/O module
I/O_1 — Expansion I/O module (PCI)