freebsd6.1下安装ppp出错

dzgme

各位兄弟同仁  以前在bsd4.1上装个ppp  现在想体验一下bsd6.1 装有xorg+gnome2  可拔adsl拔不上了 不能上网  各位大虾 帮一下小弟
我的ppp.conf:
default:
set log Phase tun command
set ifaddr 10.0.0.1/0 10.0.0.2/0
adsl:
set device PPPoE:rl0
set mru 1492
set mtu 1492
set authname adsl111111111
set authkdy 111111
set dial
set login
add default HISADDR

rc.conf:
blanktime="300"
#defaultrouter="192.168.2.1"
font8x14="NO"
font8x16="NO"
font8x8="NO"
gateway_enable="YES"
hostname="djgjxx.vicp.net"
ifconfig_rl0="inet 192.168.2.5  netmask 255.255.255.0"
ifconfig_rl1="inet 172.17.10.4  netmask 255.255.254.0"
inetd_enable="YES"
linux_enable="YES"
moused_enable="YES"
moused_port="/dev/psm0"
moused_type="auto"
nfs_client_enable="YES"
nfs_server_enable="YES"
rpcbind_enable="YES"
gateway_enable="YES"
ppp_enable="YES"
ppp_mode="ddial"
ppp_nat="YES"
ppp_profile="adsl"
usbd_enable="YES"
keymap="us.iso"
# -- sysinstall generated deltas -- # Thu May 18 04:58:55 2006
saver="logo"
sendmail_enable="NONE"
apache13_enable="YES"
apache13ssl_enable="YES"
#gdm_enable="YES"
scrnmap="NO"


用命令 ppp -ddial adsl 出现以下错误
Working in ddial mode
Using interface: tun1
Warning: set authkdy: Invalid command
Warning: set authkdy: Failed 1

请问出现这种情况是啥子原因
小弟感激

50g

not see?
Warning: set authkdy: Invalid command
Warning: set authkdy: Failed 1

linuxbao3

authkdy要写做“AUTHKEY”才对吧？
另外也没有启用 usedns选项吧？

zero-B

default:
set device PPPoE:rl0
set speed sync
set mru 1492
set mtu 1492
set ctsrts off
enable lqr
set log phase tun
add! default HISADDR
# enable dns
  
pppoe:
set authname *****
set authkey *****

dzgme

真是象纸一样,一点就明白了,"authkey"写成"authkdy"去了.
谢谢,万分感谢.