求救：origin300系统挂了

philenso

origin300系统无法直接启动，出现如下菜单
System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 5
>> boot
dks0d1s8: Media error: Media format corrupted
efs read error, bad count
No file system found for "/sash".
Unable to execute dksc(0,1,/sash:  media not loaded
Unable to load dksc(0,1,/sash: no recognizable file system on device.
>>
请问这是硬盘挂了还是系统挂了？
谢谢！

sgiman

根据你提供的信息看是系统挂了，但我觉得硬盘不会坏掉，这只是硬盘记录的启动引导信息出错了，你可以挂到另一台系统上修复一下看看，比如fsck之类的命令

sgiman

根据信息看是系统挂了，这种情况通常有不正常关机，或突然断电造成硬盘启动信息丢失，你可以试试用fsck修复一下看能否启动，若不行再用fx 分区试

sgi1991

分区8如何fsck? 挂到另外一个系统？
media error! 磁盘读写有错误了，估计是坏块

hzhangchess

重装系统，如果还出这个问题那就是盘坏了

philenso

谢谢楼上各位！
我重新启动几次突然又能启动了
但机器不稳定，系统日志报错：
Jun  1 11:15:23 6Arigin300 unix: dksc0d1s0: <6>[Alert] Device hardware error<6>: Seek position error (asc=0x15, asq=0x1)<6> (FRU=0x1)<6>, Block #134597864<6> (14299056<6>
Jun  1 11:15:23 6Arigin300 unix: dksc0d1s0: <6>  retries exhausted
Jun  1 11:15:37 6Arigin300 unix: dksc0d1s0: <6>[Alert] Device hardware error<6>: Seek position error (asc=0x15, asq=0x1)
Jun  1 11:15:45 6Arigin300 unix:  (FRU=0x1)<6>, Block #134223072<6> (142615776)<6>
Jun  1 11:15:45 6Arigin300 unix: dksc0d1s0: <6>  retrying request
Jun  1 11:15:45 6Arigin300 unix: dksc0d1s0: <6>[Alert] Device hardware error<6>: Seek position error (asc=0x15, asq=0x1)<6> (FRU=0x1)<6>, Block #134223072<6> (142615776)<6>
Jun  1 11:15:45 6Arigin300 unix: dksc0d1s0: <6>  retrying request
Jun  1 11:15:45 6Arigin300 unix: dksc0d1s0: <6>[Alert] Device hardware error<6>: Seek position error (asc=0x15, asq=0x1)<6> (FRU=0x1)<6>, Block #134223072<6> (142615776)<6>
Jun  1 11:15:45 6Arigin300 unix: dksc0d1s0: <6>  retrying request
Jun  1 11:15:45 6Arigin300 unix: dksc0d1s0: <6>[Alert] Device hardware error<6>: Seek position error (asc=0x15, asq=0x1)<6> (FRU=0x1)<6>, Block #134223072<6> (142615776)<6>
Jun  1 11:15:45 6Arigin300 unix: dksc0d1s0: <6>  retries exhausted
Jun  1 11:15:45 1Arigin300 unix: ALERT: I/O error in filesystem ("/" meta-data dev 0xdd block 0x80014e0 ("xfs_trans_read_buf"
Jun  1 11:15:45 1Arigin300 unix: ALERT: I/O error in filesystem ("/" meta-data dev 0xdd block 0x80014e0 ("xfs_trans_read_buf" [filter /usr/sbin/sysmonpp failed: too slow]
Jun  1 11:15:45 1Arigin300 unix: ALERT: I/O error in filesystem ("/" meta-data dev 0xdd block 0x80014e0 ("xfs_trans_read_buf" [filter /usr/sbin/syseventFilter failed: too slow
]
Jun  1 11:17:34 2Arigin300 unix:  position error (asc=0x15, asq=0x1)<6> (FRU=0x1)<6>, Block #134366544<6> (14275924<6>
Jun  1 11:17:34 2Arigin300 unix:  position error (asc=0x15, asq=0x1)<6> (FRU=0x1)<6>, Block #134366544<6> (14275924<6> [filter /usr/sbin/sysmonpp failed: too slow]
Jun  1 11:17:34 2Arigin300 unix:  position error (asc=0x15, asq=0x1)<6> (FRU=0x1)<6>, Block #134366544<6> (14275924<6> [filter /usr/sbin/syseventFilter failed: too slow]
Jun  1 11:17:34 6Arigin300 unix: dksc0d1s0: <6>  retrying request
Jun  1 11:17:34 6Arigin300 unix: dksc0d1s0: <6>[Alert] Device hardware error<6>: Seek position error (asc=0x15, asq=0x1)<6> (FRU=0x1)<6>, Block #134366544<6> (14275924<6>
Jun  1 11:17:34 6Arigin300 unix: dksc0d1s0: <6>  retries exhausted
Jun  1 11:17:34 1Arigin300 unix: ALERT: I/O error in filesystem ("/" meta-data dev 0xdd block 0x8024550 ("xfs_trans_read_buf"
Jun  1 11:17:34 1Arigin300 unix: ALERT: I/O error in filesystem ("/" meta-data dev 0xdd block 0x8024550 ("xfs_trans_read_buf" [filter /usr/sbin/sysmonpp failed: too slow]
Jun  1 11:17:34 1Arigin300 unix: ALERT: I/O error in filesystem ("/") meta-data dev 0xdd block 0x8024550 ("xfs_trans_read_buf") [filter /usr/sbin/syseventFilter failed: too slow
]

这样机器又挂了，但似乎能够重起，启动日志是这样的：
Jun  1 11:48:08 6F:Origin300 syslogd: restart
Jun  1 11:48:08 6A:Origin300 unix: IRIX Release 6.5 IP35 Version 10100655 System V - 64 Bit
Jun  1 11:48:08 2A:Origin300 unix: Copyright 1987-2001 Silicon Graphics, Inc.
Jun  1 11:48:08 2A:Origin300 unix: All Rights Reserved.
Jun  1 11:48:08 2A:Origin300 unix:
Jun  1 11:48:08 6A:Origin300 unix: mem_alloc: pagesize is 1048576
Jun  1 11:48:08 6A:Origin300 unix: Inside mem_alloc_init, total pages is 200
Jun  1 11:48:08 6A:Origin300 unix: mem_alloc: path to MA device is /hw/mem_alloc
Jun  1 11:48:08 6A:Origin300 unix: mem_alloc: path /hw/mem_alloc added
Jun  1 11:48:08 6A:Origin300 unix: mem_alloc: name of MA device 0 is 0
Jun  1 11:48:08 6A:Origin300 unix: mem_alloc: device 0 added under /hw/mem_alloc
Jun  1 11:48:08 6A:Origin300 unix: mem_alloc: 0 pgs allocated, each 1048576 bytes
Jun  1 11:48:08 6A:Origin300 unix: priority_lists initialized
Jun  1 11:48:08 6A:Origin300 unix: Returning 0 from mem_alloc_init
Jun  1 11:48:08 6A:Origin300 unix: QLFC: running as interrupt thread.
Jun  1 11:48:08 6A:Origin300 unix: QLFC: using spinlocks.
Jun  1 11:48:08 5A:Origin300 unix: NOTICE: pcibr_attach: /hw/module/001c02/Ibrick/xtalk/15/pci Bus holds a usb part - settingbridge PCI_RETRY_HLD to 4
Jun  1 11:48:08 6A:Origin300 unix: Setting hub ixtt.rrsp_ps field to 0x4e20
Jun  1 11:48:08 5A:Origin300 unix: NOTICE: pcibr_attach: /hw/module/001c01/Ibrick/xtalk/15/pci Bus holds a usb part - settingbridge PCI_RETRY_HLD to 4
Jun  1 11:48:08 6A:Origin300 unix: Setting hub ixtt.rrsp_ps field to 0x4e20
Jun  1 11:48:08 7A:Origin300 unix: CPU 7: usb_attach():  usb_irix=0xa800000200570228 busp=0xa800000200628240
Jun  1 11:48:08 7A:Origin300 unix: CPU 3: usb_attach():  usb_irix=0xa80000000090a610 busp=0xa80000000171cd20
Jun  1 11:48:08 5A:Origin300 unix: NOTICE: Start mounting filesystem: /
Jun  1 11:48:08 5A:Origin300 unix: NOTICE: Starting XFS recovery on filesystem: / (dev: 0/221)
Jun  1 11:48:08 5A:Origin300 unix: NOTICE: Ending XFS recovery for filesystem: / (/hw/module/001c01/Ibrick/xtalk/15/pci/1/scsi_ctlr/0/target/1/lun/0/disk/partition/0/block)
Jun  1 11:48:08 5A:Origin300 unix: NOTICE: Start mounting filesystem: /disk2
Jun  1 11:48:08 5A:Origin300 unix: NOTICE: Starting XFS recovery on filesystem: /disk2 (dev: 0/25
Jun  1 11:48:08 5A:Origin300 unix: NOTICE: Ending XFS recovery for filesystem: /disk2 (/hw/module/001c01/Ibrick/xtalk/15/pci/1/scsi_ctlr/0/target/2/lun/0/disk/partition/7/block)
Jun  1 11:48:10 6D:Origin300 eventmond[144]: |$(0x200110)started - (normal mode)
Jun  1 11:48:15 3A:Origin300 network: WARNING: Failed to configure ef1 as gate-Origin300.
Jun  1 11:48:27 6B:Origin300 syslog: opened /tmp/.mkpd_socket, fd=3
Jun  1 11:48:27 6D:Origin300 mkpd[331]: daemon started ...
Jun  1 11:48:28 6D:Origin300 sn0log: The following are messages stored in the flashlog from a previous system boot.
Jun  1 11:48:28 6D:Origin300 sn0log: Flashlog for /hw/module/001c01/node/hub/mon
Jun  1 11:48:28 5D:Origin300 sn0log: B Info: NI ERROR STATE:
Jun  1 11:48:28 5D:Origin300 sn0log: B Info: /module/001c01/node
Jun  1 11:48:28 5D:Origin300 sn0log: B Fatal: Serial #: M2000125
Jun  1 11:48:28 5D:Origin300 sn0log: B Fatal: WARNING:
Jun  1 11:48:28 6D:Origin300 sn0log: End of flashlog for /hw/module/001c01/node/hub/mon
Jun  1 11:48:28 6D:Origin300 sn0log: End of flashlog messages.
Jun  1 11:48:30 6D:Origin300 cmond[374]: <cmond.c:391> Cmond restarted, using log level info.
Jun  1 11:48:30 6D:Origin300 cmond[374]: <cmond_proc.c:133> New process cad pid 376
Jun  1 11:48:31 6D:Origin300 cmond[374]: <cmond_proc.c:133> New process crsd pid 380
Jun  1 11:48:32 6X:Origin300 crsd[380]: <<CI> N log 0> Additional crsd logs can be found in /var/cluster/ha/log/crsd_Origin300.
Jun  1 11:48:32 6X:Origin300 crsd[380]: <<CI> N crs 0> Crsd restarted.
Jun  1 11:48:32 6X:Origin300 crsd[380]: <<CI> N crs 0> No machines found.
Jun  1 11:48:34 4A:Origin300 unix: WARNING: ef0: link fail - check ethernet cable
Jun  1 11:48:36 5A:Origin300 unix: NOTICE: ef0: link ok
Jun  1 11:48:38 6X:Origin300 crsd[380]: <<CI> E crs 0> CI_FAILURE, Entry for sgi-crsd is missing in /etc/services.
Jun  1 11:48:38 6X:Origin300 crsd[380]: <<CI> E crs 0> CI_FAILURE, Initialization failed, exiting.
Jun  1 11:48:38 6D:Origin300 cmond[374]: <cmond_sig.c:263> Process with pid 380 has exited with status 32512
Jun  1 11:48:38 6D:Origin300 cmond[374]: <cmond_pg.c:675> Process crsd:380 of group cluster_control exited, status = 127.
Jun  1 11:48:38 6D:Origin300 cmond[374]: <cmond_pg.c:689> Initiating recovery for process group cluster_control.
Jun  1 11:48:38 6D:Origin300 cmond[374]: <cmond_pg.c:755> Recovery for process group cluster_control complete.
Jun  1 11:48:55 4D:Origin300 eventmond[144]: Warning: can't contact espdbd. The following message is normal at boot time - (normal mode)
Jun  1 11:48:55 3D:Origin300 eventmond[144]: |$(0x20011E)Can't init SSDB library "libssdb.so", current timeout is 30 sec. - (normal mode)
Jun  1 11:49:13 2C:Origin300 sendmail[416]: My unqualified host name (Origin300) unknown; sleeping for retry
Jun  1 11:50:13 1C:Origin300 sendmail[416]: unable to qualify my own domain name (Origin300) -- using short name
Jun  1 11:50:21 2D:Origin300 espStartup[507]: ESP database not running after 5 retries each 2 sec. Shutting down ESP database Server..
Jun  1 11:50:24 5B:Origin300 MAKEDEV_xpmem: ^Irm -f xpmem
Jun  1 11:50:24 5B:Origin300 MAKEDEV_xpmem: ^Iif [ -c /hw/xpmem ] ; then \
Jun  1 11:50:24 5B:Origin300 MAKEDEV_xpmem: ^I    ln -s /hw/xpmem xpmem; \
Jun  1 11:50:24 5B:Origin300 MAKEDEV_xpmem: ^Ifi
Jun  1 11:50:24 6D:Origin300 sesdaemon[632]: |$(0x339)  No fibre channel controllers found
Jun  1 11:50:26 6E:Origin300 sshd[778]: Server listening on 0.0.0.0 port 22.

hzhangchess

我还是建议你拿个新硬盘把系统dump出来，老的系统盘就不要用了