论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2006-06-27 21:29 |只看该作者 |倒序浏览

WARNING: [AFT0] Sticky Softerror encountered on Memory Module 1904

NOTICE: Scheduling removal of page 0x00000000.0fcfe000
WARNING: [AFT0] Sticky Softerror encountered on Memory Module 1904

NOTICE: Scheduling removal of page 0x00000000.0fcfe000
WARNING: [AFT0] Sticky Softerror encountered on Memory Module 1904

NOTICE: Scheduling removal of page 0x00000000.0fcfe000
WARNING: [AFT0] Most recent 3 soft errors from Memory Module 1904 exceed thresho
ld (N=2, T=24h:00m) triggering page retire
NOTICE: Scheduling removal of page 0x00000000.0fcfe000
WARNING: [AFT0] Sticky Softerror encountered on Memory Module 1904

NOTICE: Scheduling removal of page 0x00000000.0fcfe000
WARNING: [AFT0] Sticky Softerror encountered on Memory Module 1904

NOTICE: Scheduling removal of page 0x00000000.0fcfe000
WARNING: [AFT0] Sticky Softerror encountered on Memory Module 1904

是内存有问题吗,自检完就出现这种,,无法安装系统,!

文库|博客

h3ewhack

白手起家

论坛徽章:: 0

2楼 [报告]

发表于 2006-06-27 21:58 |只看该作者

Can't open input device.
Keyboard not present. Using ttya for input and output.

Sun Ultra xxx (2 X UltraSPARC-II 296MHz), No Keyboardcountered on Memory Module 1904duling removal of page
OpenBoot 3.30, 512 MB memory installed, Serial #128820l6.
NOTICE
Ethernet address xx

x

x:

x

x, Host ID: 12ascd42

Rebooting with command: boot

{1} ok
{1} ok boot cdrom
Boot device: /pci@1f,4000/scsi@2/disk@6,0:f  File and args:

WA
WARNING: [AFT0] Sticky Softerror encoun
Attempting to configure interface hme0...gle  enco190N4
Skipped interface hme0
WARNING: [AFT0] Sticky Softerror encountered on Memory Module 1904 page 0x00000000.0d45a000904 hedualing re encom04ovga

NOTICE: Scheduling removal of page 0x00000000.0fefe000
WARNI
WARNING: [AFT0] Sticky Softer
WARNING: [AFT0] Sticky Softerror encountered on Memory Module

串口安装的,检测完就这样,是内存的原因吗,??

[ 本帖最后由 h3ewhack 于 2006-6-27 21:59 编辑 ]