免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1343 | 回复: 4
打印 上一主题 下一主题

AutoRaid容积问题 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2006-08-14 14:37 |只看该作者 |倒序浏览
# arraydsp -d AD

   Information for disk in slot B4:
      Disk State             = INCLUDED
      Vendor                 = SEAGATE
      Product ID             = ST34572WC
      Capacity               = 4096 MB *
      Max. block addr        = 8388313
      Block length           = 512
      Serial number          = 64134809LHFN
      Firmware revision      = HP03
      Drive ID number        = 14F4B       1
      Volume set serial no.  = BE9F       1
      Recovery Maps are on this disk.

   Information for disk in slot B5:
      Disk State             = INCLUDED
      Vendor                 = SEAGATE
      Product ID             = ST34371N
      Capacity               = 4096 MB *
      Max. block addr        = 8388313
      Block length           = 512
      Serial number          = F419020PLCDL
      Firmware revision      = HPM2
      Drive ID number        = FFFFFFFD     23C
      Volume set serial no.  = BE9F       1
      Recovery Maps are on this disk.

   Information for disk in slot A6:
      Disk State             = INCLUDED
      Vendor                 = SEAGATE
      Product ID             = ST118202LC
      Capacity               = 17366 MB *
      Max. block addr        = 35566479
      Block length           = 512
      Serial number          = 678700002952
      Firmware revision      = HP02
      Drive ID number        = FFFFFFFD DB93288
      Volume set serial no.  = BE9F       1

   Information for disk in slot B6:
      Disk State             = INCLUDED
      Vendor                 = SEAGATE
      Product ID             = ST336704LC
      Capacity               = 34733 MB *
      Max. block addr        = 71132959
      Block length           = 512
      Serial number          = 4ZTK00007047
      Firmware revision      = HP01
      Drive ID number        = BE9F       1
      Volume set serial no.  = BE9F       1

   Total capacity of all installed physical disks = 60291 MB *




磁盘装在了B4,B6,B5




   --- Disk space usage --------------------
   Total physical               = 60291 MB *
   Allocated to LUNs            =  6848 MB *
   Used as Active Hot spare     = 17366 MB *
   Used by non-included disks   =     0 MB *
   Used for Redundancy          = 35401 MB *
   Unallocated (avail for LUNs) =   676 MB *
   -----------------------------------------


总空间60G,  冗余35G, HOTspare 17G
可用的7G,不大正常啊.  有人能解释一下吗?

论坛徽章:
0
2 [报告]
发表于 2006-08-14 15:24 |只看该作者
磁盘安装在b4,b5,b6,a6

autoraid 模式 是raid 0/1 +raid5
楼主理解有误吧

论坛徽章:
0
3 [报告]
发表于 2006-08-14 16:01 |只看该作者
我少打a6了,并不我理解错误.

论坛徽章:
0
4 [报告]
发表于 2006-08-14 16:04 |只看该作者
关于可用空间是不是需要调整才是?因为可用空间才7G
AutoRaid是raid0+1和raid5这个都知道的.
我问的是总空间60G,可用才7个G这个正常吗?如正常请说明原因,如不正常如何调整??

论坛徽章:
0
5 [报告]
发表于 2006-08-15 11:40 |只看该作者
同一个阵列里面插了很多不同容量的硬盘.这样的系统是很不好的.
HOTSPARE要照顾最大的硬盘,所以利用率很低呀.
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP