syslogd程序不工作，请各位高手帮忙！

e2agle

小弟是一新手，
最近新安装的solaris 10 for X86, 系统启动后运行/usr/sbin/syslogd
之后运行ps -ef | grep syslogd 显示如下：
root  2045  1592   0 16:31:30 pts/5       0:00 grep syslogd
root  2042     1      0 16:31:28  ?             0:00 /usr/sbin/syslogd
这是不是表明syslogd已经启动了？
如果syslogd已经启动了，系统就应该向/var/adm/messages文件中记日志了吧，可是
/var/adm/messages中始终是空的，没有一条记录。
我的/etc/syslog.conf文件内容如下：
#ident  "@(#)syslog.conf        1.5     98/12/14 SMI"   /* SunOS 5.0 */
#
# Copyright (c) 1991-1998 by Sun Microsystems, Inc.
# All rights reserved.
#
# syslog configuration file.
#
# This file is processed by m4 so be careful to quote (`') names
# that match m4 reserved words.  Also, within ifdef's, arguments
# containing commas must be quoted.
#
*.err;kern.notice;auth.notice                   /dev/sysmsg
*.err;kern.debug;daemon.notice;mail.crit        /var/adm/messages

*.alert;kern.err;daemon.err                     operator
*.alert                                         root

*.emerg                                         *

# if a non-loghost machine chooses to have authentication messages
# sent to the loghost machine, un-comment out the following line:
#auth.notice                    ifdef(`LOGHOST', /var/log/authlog, @loghost)

mail.debug                      ifdef(`LOGHOST', /var/log/syslog, @loghost)

#
# non-loghost machines will use the following lines to cause "user"
# log messages to be logged locally.
#
ifdef(`LOGHOST', ,
user.err                                        /dev/sysmsg
user.err                                        /var/adm/messages
user.alert                                      `root, operator'
user.emerg                                      *
)
问题不知道出在哪里，请各位高手帮忙，小弟不盛感激！！！

[ 本帖最后由 e2agle 于 2006-9-1 16:52 编辑 ]

wuqing

ping loghost
告诉我结果

e2agle

loghost is alive

wuqing

顺便把这两条命令运行的结果贴一下

grep SYSLOG /etc/default/login

more logadm.conf

e2agle

1. grep SYSLOG /etc/default/login运行结果如下:
# SYSLOG determines whether the syslog(3) LOG_AUTH facility should be used
SYSLOG=YES
# The SYSLOG_FAILED_LOGINS variable is used to determine how many failed
#SYSLOG_FAILED_LOGINS=5
2. more /etc/logadm.conf运行结果如下:
# Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
#ident  "@(#)logadm.conf        1.6     04/08/13 SMI"
#
# logadm.conf
#
# Default settings for system log file management.
# The -w option to logadm(1M) is the preferred way to write to this file,
# but if you do edit it by hand, use "logadm -V" to check it for errors.
#
# The format of lines in this file is:
#       <logname> <options>
# For each logname listed here, the default options to logadm
# are given.  Options given on the logadm command line override
# the defaults contained in this file.
#
# logadm typically runs early every morning via an entry in
# root's crontab (see crontab(1)).
#
/var/log/syslog -C 8 -a 'kill -HUP `cat /var/run/syslog.pid`'
/var/adm/messages -C 4 -a 'kill -HUP `cat /var/run/syslog.pid`'
/var/cron/log -c -s 512k -t /var/cron/olog
/var/lp/logs/lpsched -C 2 -N -t '$file.$N'
/var/fm/fmd/errlog -M '/usr/sbin/fmadm -q rotate errlog && mv /var/fm/fmd/errlog.0- $nfile' -N -s 2m
smf_logs -C 8 -s 1m /var/svc/log/*.log
#
# The entry below is used by turnacct(1M)
#
/var/adm/pacct -C 0 -N -a '/usr/lib/acct/accton pacct' -g adm -m 664 -o adm -p never
#
# The entry below manages the Dynamic Resource Pools daemon (poold(1M)) logfile.
#
/var/log/pool/poold -N -a 'pkill -HUP poold; true' -s 512k
/var/svc/log/milestone-multi-user-server:default.log -P 'Tue Aug 29 19:10:00 2006'

请精灵王指点,多谢多谢!