- 论坛徽章:
- 0
|
原帖由 wolfop 于 2006-9-6 16:18 发表
dmesg，看找到那个146G的么？
没有看到，只看到HP CISS Driver (v 2.6.4)
cciss: Device 0xb178 has been found at bus 0 dev 1 func 0
cciss: using DAC cycles
blocks= 71122560 block_size= 512
heads= 255, sectors= 32, cylinders= 8716
cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 >
#dmesg
Linux version 2.6.9-5.EL (bhcompile@decompose.build.redhat.com) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 Wed Jan 5 19:22:18 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 262140
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32764 pages, LIFO batch:7
DMI 2.3 present.
Compaq ProLiant DL380 G2 detected: force use of acpi=ht
ACPI: RSDP (v000 COMPAQ ) @ 0x000f4f70
ACPI: RSDT (v001 COMPAQ P24 0x00000002 ?0x0000162e) @ 0x3fffc000
ACPI: FADT (v001 COMPAQ P24 0x00000002 ?0x0000162e) @ 0x3fffc040
ACPI: MADT (v001 COMPAQ 00000083 0x00000002 0x00000000) @ 0x3fffc100
ACPI: SPCR (v001 COMPAQ SPCRRBSU 0x00000001 ?0x0000162e) @ 0x3fffc180
ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x240
Built 1 zonelists
Kernel command line: ro root=LABEL=/
Initializing CPU#0
CPU 0 irqstacks, hard=c03d3000 soft=c03d2000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1397.031 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034840k/1048560k available (2055k kernel code, 12876k reserved, 655k data, 140k init, 131056k highmem)
Calibrating delay loop... 2760.70 BogoMIPS (lpj=1380352)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 473k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=10
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Discovered peer bus 07
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:02 not found by BIOS
PCI: Device 00:03 not found by BIOS
PCI: Device 00:78 not found by BIOS
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1157542098.264:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key E07BC3E85BE30CFD
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
agpgart: Detected ServerWorks CNB20HE chipset: No AGP present.
agpgart: Detected ServerWorks CNB20HE chipset: No AGP present.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x2c08-0x2c0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 140k freed
SCSI subsystem initialized
HP CISS Driver (v 2.6.4)
cciss: Device 0xb178 has been found at bus 0 dev 1 func 0
cciss: using DAC cycles
blocks= 71122560 block_size= 512
heads= 255, sectors= 32, cylinders= 8716
cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 >
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 316 types, 20 bools
security: 53 classes, 9815 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev cciss/c0d0p5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-5.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xf06b0000, irq 5, MAC addr 00:08:02:B2:68:E3
divert: allocating divert_blk for eth1
e100: eth1: e100_probe: addr 0xf04f0000, irq 7, MAC addr 00:08:02:B2:68:E2
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: irq 11, pci mem f8822000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on cciss/c0d0p5, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev cciss/c0d0p1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d0p7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev cciss/c0d0p7, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev cciss/c0d0p2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d0p3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev cciss/c0d0p3, type ext3), uses xattr
Adding 2097096k swap on /dev/cciss/c0d0p6. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ip_tables: (C) 2000-2002 Netfilter core team
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0366c20(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ip_tables: (C) 2000-2002 Netfilter core team
eth1: no IPv6 routers present
eth0: no IPv6 routers present |
|
免费注册
发表于 2006-09-06 14:22
