- 论坛徽章:
- 0
|
NAME
prtdiag - display system diagnostic information
SYNOPSIS
/usr/platform/platform-name/sbin/prtdiag [-v] [-l]
DESCRIPTION
prtdiag displays system configuration and diagnostic infor-
mation on sun4u systems.
The diagnostic information lists any failed field replace-
able units (FRUs) in the system.
The interface, output, and location in the directory hierar-
chy for prtdiag are uncommitted and subject to change in
future releases.
platform-name is the name of the platform implementation and
can be found using the -i option of uname(1).
Note:
prtdiag does not display diagnostic information and
environmental status when executed on the Sun Enter-
prise 10000 server. See the
/var/opt/SUNWssp/adm/${SUNW_HOSTNAME}/messages file on
the system service processor (SSP) to obtain such
information for this server.
OPTIONS
The following options are supported:
-l Log output. If failures or errors exist in the system,
output this information to syslogd(1M) only.
-v Verbose mode. Displays the time of the most recent AC
Power failure, and the most recent hardware fatal
error information, and (if applicable) environmental
status. The hardware fatal error information is useful
to repair and manufacturing for detailed diagnostics
of FRUs.
EXIT STATUS
The following exit values are returned:
0 No failures or errors are detected in the system.
1 Failures or errors are detected in the system.
2 An internal prtdiag error occurred, for example, out
of memory.
SunOS 5.9 Last change: 19 Dec 2001 1
System Administration Commands prtdiag(1M) |
|
免费注册
发表于 2006-11-06 16:59
