- 论坛徽章:
- 0
|
插上电源后 只能进入到ALOM，打了console没有任何反映。。。。不知道这种情况怎么排查错误？我已经开case换主板了 不知道换了以后怎么样。。。万一还是这样我真的没想法了。。。
SAM013-SHG49_sam_1_5_1-al> showlogs
Log entries since NOV 06 08:27:54
----------------------------------
NOV 06 08:27:54 : 0004003b: "SCC has been removed."
NOV 06 08:27:54 : 0004007c: "System poweron is disabled."
NOV 06 08:28:01 : 00060021: "CRITICAL ALARM is set"
NOV 06 08:28:01 : 00060003: "SC System booted."
NOV 06 08:28:06 : 0004003b: "SCC has been removed."
NOV 06 08:28:16 : 0004004f: "Indicator MB.SERVICE is now ON"
NOV 06 08:29:53 : 00060000: "SC Login: User admin Logged on."
SAM013-SHG49_sam_1_5_1-al> showenvironment
=============== Environmental Status ===============
--------------------------------------------------------------------------------
System Temperatures (Temperatures in Celsius):
--------------------------------------------------------------------------------
Sensor Status Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard
--------------------------------------------------------------------------------
CPU temperature information cannot be displayed when System power is off.
MB.T_ENC OK 24 -11 -9 -7 57 60 63
--------------------------------------
Front Status Panel:
--------------------------------------
Keyswitch position: NORMAL
--------------------------------------------------------
System Indicator Status:
--------------------------------------------------------
MB.LOCATE MB.SERVICE MB.ACT
--------------------------------------------------------
OFF ON OFF
Disk Status information cannot be displayed when System power is off.
Fan Status information cannot be displayed when System power is off.
Voltage Rail Status information cannot be displayed when System power is off.
--------------------------------------------
Power Supply Indicators:
--------------------------------------------
Supply Active Service OK-to-Remove
--------------------------------------------
PS0 ON OFF OFF
PS1 ON OFF OFF
------------------------------------------------------------------------------
Power Supplies:
------------------------------------------------------------------------------
Supply Status Underspeed Overtemp Overvolt Undervolt Overcurrent
------------------------------------------------------------------------------
PS0 OK OFF OFF OFF OFF OFF
PS1 OK OFF OFF OFF OFF OFF
Current sensor information cannot be displayed when System power is off.
Alarm Status information cannot be displayed when System power is off.
SAM013-SHG49_sam_1_5_1-al> console
Enter #. to return to ALOM.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SAM013-SHG49_sam_1_5_1-al> showplatform
SUNW,Netra-240
Domain Status
------ ------
SHG49_sam_1_5_1 OS Standby
SAM013-SHG49_sam_1_5_1-al> showfru
FRU_PROM at MB.SEEPROM
Manufacturer Record
Timestamp: WED NOV 17 05:48:35 UTC 2004
Description: FRUID,INSTR,M'BD,2X1.28GHZ,CPU
Manufacture Location: Hsinchu,Taiwan
Sun Part No: 3753120
Sun Serial No: 207715
Vendor JEDEC code: 3E5
Initial HW Dash Level: 03
Initial HW Rev Level: 0G
Shortname: MOTHERBOARD
FRU_PROM at ENC.SEEPROM
Manufacturer Record
Timestamp: FRI APR 22 10:13:44 UTC 2005
Description: FRUID,PRGM,INSTR,2U,IN/FACE,LOW
Manufacture Location: Hsinchu,Taiwan
Sun Part No: 3706004
Sun Serial No: 027698
Vendor JEDEC code: 3E5
Initial HW Dash Level: 03
Initial HW Rev Level: 0E
Shortname: SCSI
FRU_PROM at HCM.SEEPROM is not present
FRU_PROM at PS0.SEEPROM
Manufacturer Record
Timestamp: FRI APR 08 07:19:40 UTC 2005
Description: PWR SUPPLY,D158,400W,DC-DC
Manufacture Location: BAO'AN, CHINA
Sun Part No: 3001567
Sun Serial No: 030652
Vendor JEDEC code: 37A
Initial HW Dash Level: 04
Initial HW Rev Level: 50
Shortname: PS
FRU_PROM at PS1.SEEPROM
Manufacturer Record
Timestamp: FRI APR 08 07:15:38 UTC 2005
Description: PWR SUPPLY,D158,400W,DC-DC
Manufacture Location: BAO'AN, CHINA
Sun Part No: 3001567
Sun Serial No: 030650
Vendor JEDEC code: 37A
Initial HW Dash Level: 04
Initial HW Rev Level: 50
Shortname: PS
FRU_PROM at ALARM.SEEPROM is not present
FRU_PROM at MB.P0.B0.D0.SEEPROM
Timestamp: MON JUN 06 12:00:00 UTC 2005
Description: SDRAM DDR, 1024 MB
Manufacture Location:
Vendor JEDEC code: C149
Vendor Part No: 72D128521GR7B
FRU_PROM at MB.P0.B0.D1.SEEPROM
Timestamp: MON JUN 06 12:00:00 UTC 2005
Description: SDRAM DDR, 1024 MB
Manufacture Location:
Vendor JEDEC code: C149
Vendor Part No: 72D128521GR7B
FRU_PROM at MB.P0.B1.D0.SEEPROM is not present
FRU_PROM at MB.P0.B1.D1.SEEPROM is not present
FRU_PROM at MB.P1.B0.D0.SEEPROM
Timestamp: MON NOV 28 12:00:00 UTC 2005
Description: SDRAM DDR, 512 MB
Manufacture Location:
Vendor: Samsung
Vendor Part No: M3 12L6420ETS-CA2
FRU_PROM at MB.P1.B0.D1.SEEPROM
Timestamp: MON NOV 28 12:00:00 UTC 2005
Description: SDRAM DDR, 512 MB
Manufacture Location:
Vendor: Samsung
Vendor Part No: M3 12L6420ETS-CA2
FRU_PROM at MB.P1.B1.D0.SEEPROM
Timestamp: MON NOV 28 12:00:00 UTC 2005
Description: SDRAM DDR, 512 MB
Manufacture Location:
Vendor: Samsung
Vendor Part No: M3 12L6420ETS-CA2
FRU_PROM at MB.P1.B1.D1.SEEPROM
Timestamp: MON NOV 28 12:00:00 UTC 2005
Description: SDRAM DDR, 512 MB
Manufacture Location:
Vendor: Samsung
Vendor Part No: M3 12L6420ETS-CA2
SC Alert: SCC has been inserted.
SC Alert: Different SCC detected. SC will reset itself momentarily.
ALOM BOOTMON v1.5.3
ALOM Build Release: 002
Reset register: e8000000 EHRS ESRS LLRS CSRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
SC Alert: CRITICAL ALARM is set
SC Alert: SC System booted.
Sun(tm) Advanced Lights Out Manager 1.5.3 (SHG49_sam_1_5_1)
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: MON NOV 06 08:48:21 2006
Wait, 1 - 3 seconds
Read the TOD Clock: MON NOV 06 08:48:23 2006
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's. Attaching network interface cpm0... done.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC850 - - PASSED |
|
免费注册
发表于 2006-11-10 12:28
