免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1661 | 回复: 0

[新手入门] NIM之猜想 [复制链接]

论坛徽章:
0
发表于 2006-11-17 14:42 |显示全部楼层
1.define nim server       #在NIM server上执行  servername=server0;client=client0
smitty nim->config the nim environment->config a basic nim environmetn->
priamary network interface for the nim:[ en0]
input device for the installation images:[/export/client0/]
LPP_source name: [lpp_source1]
LPP_source directory:[/export/lpp_source]
  create new filesystem for lpp_source:[yes]
  filesystem size:[650]
  vgname for new filesystem: [rootvg]
spot name :[spot1]
spot directory:[/export/spot]
  create new filesystem for spot:[yes]
  filesystem size:[350]
  vgname for new filesystem:[rootvg]
以下为无盘或无数据用的定义省略,使用默认值


2.define nim client    #在NIM server上执行
smitty nim->advanced configuration->define nim client machines->add a nim client->host name of machine:[clent0]


3.initiate client     #在NIM client上执行?如果从NIM server上恢复系统只需在BOOT时设定REMOTE IPL即可。问题:在client上怎么操作,使其可以接受NIM server的管理?
niminit -a name=clent0 -a pif_name=en0 -a master=server0 -a platform=rspcsmp   #如果配置有所改动要重新执行此命令以重新建立/etc/niminfo文件
#如果在NIM环境中建立两个NIM server,则备用的就为niminit -a is_alternate=yes -a name=server1 -a pif_name=en0 -a master=server0    #如果接口不是RJ45应指明 -a cable_type=bnc(铜轴)



至此,NIM环境应该已经完成


4.backup client rootvg 到NIM server上  以下应在server上操作
smitty nim->perfor NIM administration Tasks->manage resources->define a resource
不知道怎么做了。。。。

或许nim -o define -t mksysb -a location=/export/nim/mksysb.image -a mk_images=yes -a server=server0

client0    ???



5.restor from NIM server
如果从NIM server上恢复系统只需在BOOT时设定REMOTE IPL即可吗???。





因为没有环境,我无法继续下去,请各位修改,下个月我要用NIM这个给客户作备份。谢谢
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP