- 论坛徽章:
- 0
|
p630 smit mksysb 出错,求助。谢谢
p630备份 smit mksysb时出错,
信息如下:
the boot image youjust created might fail to boot because
the size exceeds the system limit. for information about
fixes or workarounds,see /usr/lpp/bos.sysmgt/readme
0512-061 attention:the boot image created on /dev/rmt0 is corrupt!
replace media and try running backup again.
error: END
查看mail ,有如下信息:
? 164
Message 164:
From root Mon Nov 20 18:34:49 2006
Date: Mon, 20 Nov 2006 18:34:49 +0800
From: root
To: root
Subject: diagela message from acdb1.xx.cn
A PROBLEM WAS DETECTED ON Mon Nov 20 18:34:48 2006 801014
The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):
68C-320: Error Log Analysis indicates a permanent hardware failure.
rmt0 FRU: 19P0802 U0.1-P2/Z3-A0
SCSI 4mm Tape Drive (20480 MB)
n/a FRU: n/a U0.1-P2/Z3-A0
Test media.
网上查了查,找到了下面的信息,不明白,请各位指教 ,我该如何处理,谢谢。。
mail: cnsecurity#gmail.com
General problem resolution
Use this procedure to exchange the FRUs in the order of their failure probability.
Step 0210-1
Did the problem report provide a part number for the FRU you are about to replace?
NO
Go to Step 0210-2.
YES
Go to Step 0210-3.
Step 0210-2
Find the failing function codes in the System parts, and record the FRU part number and description of each FRU.
Step 0210-3
Obtain the replacement part.
Step 0210-4
Go to Removing and replacing parts, and follow the procedures for the FRU you are servicing.
[ 本帖最后由 deargentle 于 2006-11-20 19:11 编辑 ] |
|